ET2 Hilite Large Pendant (Model E21169-01BZ) Instruction Manual

1. Enfòmasyon enpòtan sou sekirite

Please read and understand all instructions before attempting to assemble, install, or operate this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause injury or property damage.

• AVÈTISMAN: Risk of electric shock. Disconnect power at the main circuit breaker or fuse box before installation or any maintenance.
• Konsilte yon elektrisyen kalifye si ou pa sèten sou pwosesis enstalasyon an.
• Asire w ke tout koneksyon elektrik yo fèt an akò ak kòd lokal yo, òdonans yo, ak Kòd Elektrik Nasyonal la (NEC).
• Do not attempt to alter the fixture or its components.
• Handle the fixture with care to avoid damage to the LED components or glass shades.

2. Pake kontni

Verifye ke tout konpozan yo prezan epi yo pa domaje anvan ou kòmanse enstalasyon an. Si gen nenpòt pyès ki manke oswa ki domaje, pa kontinye ak enstalasyon an epi kontakte sèvis kliyan.

• Pendant Fixture Assembly (9-light LED pendant)
• Mounting Hardware Kit (crossbar, mounting screws, wire nuts)
• Manyèl Enstriksyon (dokiman sa a)

3. Enstalasyon ak Enstalasyon

3.1 Zouti ki nesesè (pa enkli)

• Phillips tèt tournevis
• Flathead tournevis
• Fil retire rad sou ou
• Tep elektrik
• Nechèl
• Linèt sekirite

3.2 Etap enstalasyon yo

1. Etenn pouvwa: Before starting, ensure the power to the junction box is turned off at the circuit breaker.
2. Prepare Montaj la: Attach the mounting crossbar to the junction box using the provided screws. Ensure it is securely fastened.
3. Adjust Pendant Height: The individual pendants can be adjusted to your desired hanging height. Carefully feed the suspension wires through the canopy until the desired length is achieved for each light. Secure the wires according to the specific mechanism on the fixture.
4. Koneksyon fil elektrik: Connect the fixture's wires to the corresponding wires from the junction box. Use the provided wire nuts.
   • Konekte fil nwa a ki soti nan aparèy la ak fil nwa (cho) ki soti nan bwat koneksyon an.
   • Konekte fil blan ki soti nan aparèy la ak fil blan (net) ki soti nan bwat koneksyon an.
   • Connect the bare copper or green ground wire from the fixture to the ground wire from the junction box (or to the mounting crossbar if no ground wire is present).
   Ensure all connections are tight and secure. Wrap wire nuts with electrical tape for added security.
5. Mòn Canopy: Carefully tuck all wires into the junction box. Align the fixture canopy with the mounting crossbar and secure it with the canopy screws.
6. Retabli pouvwa: Once the fixture is securely mounted, restore power at the circuit breaker.

Image 3.2.1: Fully assembled ET2 Hilite Large Pendant (Model E21169-01BZ) showing the overall design and multiple lights.

Image 3.2.2: Dimensional drawing of the ET2 Hilite Large Pendant, indicating overall height and width for installation planning.

4. Operasyon Enstriksyon

The ET2 Hilite Large Pendant is designed for simple operation via a standard wall switch.

• Limen/Etenyen: Use the wall switch connected to the fixture's circuit to turn the pendant lights on or off.
• Teknoloji ki ap dirije: This fixture utilizes integrated LED technology for energy efficiency and long lifespan. No traditional bulbs need to be replaced.
• Kontwòl aplikasyon: While the fixture itself does not have integrated app control, it is compatible with most standard smart home lighting systems and dimmer switches that support LED fixtures. Consult your smart home system's instructions for integration.

5. Antretyen

Proper care and maintenance will ensure the longevity and appearance of your pendant light.

• Netwayaj: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or LED components.
• Pa gen okenn pati itilizatè yo ka fè sèvis: The LED components are integrated and not designed for user replacement. Do not attempt to disassemble the LED modules.
• Enspeksyon: Tcheke tout koneksyon ak pyès montaj yo detanzantan pou wè si yo byen sere.

NAN. Depanaj

Si w gen pwoblèm ak lanp pandye w la, gade etap depanaj komen sa yo:

• Limyè a pa limen:
  • Check that the power is on at the circuit breaker.
  • Asire w ke switch miray la nan pozisyon 'ON'.
  • Verify that all wiring connections are secure (ensure power is off before checking).
• Lights Flicker:
  • Ensure all wiring connections are secure. Loose connections can cause flickering.
  • If using a dimmer switch, ensure it is compatible with LED lighting. Incompatible dimmers can cause flickering or damage to the LEDs.
• Dim pwodiksyon limyè:
  • If using a dimmer, ensure it is set to the maximum brightness.
  • Verify the fixture is receiving the correct voltage (120V).

If these steps do not resolve the issue, contact a qualified electrician or ET2 customer support.

7. Espesifikasyon

8. Garanti ak sipò

8.1 Enfòmasyon sou Garanti

This ET2 Hilite Large Pendant (Model E21169-01BZ) is covered by a Garanti manifakti 1 zan apati dat acha a. Garanti sa a kouvri domaj nan materyèl ak nan fabrikasyon anba itilizasyon nòmal. Li pa kouvri domaj ki soti nan move enstalasyon, aksidan, move itilizasyon, abi, oswa modifikasyon san otorizasyon.

8.2 Sipò pou Kliyan

For technical assistance, warranty claims, or to report missing/damaged parts, please contact ET2 customer support. Refer to the original packaging or the ET2 official websit pou jwenn enfòmasyon kontak aktyèl.