Manyèl Itilizatè Scie à Onglet Stayer SCE 1650 WMC

1. Entwodiksyon

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Stayer SCE 1650 WMC Miter Saw. This versatile tool is designed for precise cutting of various materials including iron, aluminum, plastic, and wood. Please read this manual thoroughly before initial use and keep it for future reference.

2. Enstriksyon Sekirite

Toujou swiv prekosyon sekirite debaz yo pou diminye risk dife, chòk elektrik, ak blesi pèsonèl. Si ou pa swiv enstriksyon sa yo, ou ka blese gravman.

• Li tout enstriksyon yo: Familiarize yourself with the tool's controls and proper use.
• Mete pwoteksyon pou je: Toujou mete linèt sekirite oswa linèt sekirite ak plak pwotèj bò.
• Mete pwoteksyon pou tande: Sèvi ak bouchon zòrèy oswa kas ekoutè pandan w ap opere.
• An sekirite pou pyès travay la: Toujou clamp oubyen byen sere pyès la pou anpeche l deplase pandan koupe a.
• Kenbe men klè: Never place hands near the cutting blade.
• Kenbe yon zòn travay pwòp: Zòn ankonbre envite aksidan.
• Pa opere nan atmosfè eksplozif: Pa sèvi ak zouti elektrik nan prezans likid oswa gaz ki ka pran dife.
• Dekonekte anvan ajisteman: Always disconnect the saw from the power source before making any adjustments, changing accessories, or performing maintenance.
• Use the Correct Blade: Ensure the blade is appropriate for the material being cut and is sharp and undamaged.
• Evite twòp: Kenbe bon pye ak balans tout tan.

3. Pwodwi souview

The Stayer SCE 1650 WMC is a robust miter saw featuring a durable aluminum base and upper table. It includes an electronic speed variator for optimized cutting across different materials.

Figi 1: Plis paseview of the Stayer SCE 1650 WMC Miter Saw. This image shows the complete miter saw unit, highlighting its red base, silver cutting table, and the main motor housing with the blade guard. The adjustable fence and clamping mechanisms are also visible.

Konpozan kle:

• Aluminum Base and Upper Table: Provides stability and durability.
• Electronic Variator: Allows adjustment of blade speed.
• Mekanis enklinezon: Enables bevel cuts up to 45°.
• Swiveling Table: Features self-locking positions for miter cuts at 22.5°, 45°, and 90°.
• Pò pou ekstraksyon pousyè: Pou konekte yon sistèm koleksyon pousyè.

4. Enstalasyon

Before operating the miter saw, ensure it is properly set up and secured.

1. Debake: Carefully remove all components from the packaging. Verify that all included items are present: SCE 1650 WMC miter saw, Widia TCT Z-52 blade, parallel guide, 2 horizontal clamps, and service wrench.
2. Montaj: Securely mount the miter saw to a stable workbench using appropriate fasteners.
3. Enstalasyon lam: Ensure the Widia TCT Z-52 blade (Ø 254 x 3 x 30 mm) is correctly installed and tightened according to the instructions provided with the blade. Always unplug the saw before installing or changing blades.
4. Parallel Guide and Clamps: Install the parallel guide and horizontal clamps as needed for your specific cutting task to secure the workpiece.
5. Ekstraksyon pousyè: Connect a suitable dust extraction system to the designated port to maintain a clean work environment.

5. Operasyon Enstriksyon

The Stayer SCE 1650 WMC is designed for precise cuts in various materials. Always ensure the workpiece is stable and secured before cutting.

5.1. Power and Speed Control

• The saw operates at 1600W power.
• Use the electronic variator to adjust the no-load speed between 2500 and 4000 RPM (Giri/min) depending on the material being cut. Lower speeds are generally suitable for harder materials or larger cuts, while higher speeds are for softer materials or finer finishes.

5.2. Fè Koupe

1. Straight Cuts (0°): Position the workpiece against the fence. Ensure the swiveling table is locked at 0°. Maximum cutting capacity: 50 x 100 mm.
2. Miter Cuts (Angled Horizontal Cuts): Adjust the swiveling table to the desired angle (e.g., 22.5°, 45°). The table has self-locking positions for common angles. Maximum cutting capacity at 45°: 32 x 100 mm.
3. Bevel Cuts (Angled Vertical Cuts): Tilt the saw head up to 45° to the left or right. Maximum cutting capacity at 45° inclined: 150 x 20 mm or 90 x 50 mm.
4. Compound Cuts (Miter and Bevel): Combine miter and bevel adjustments for complex angles. Maximum cutting capacity at 45° miter and 45° bevel: 75 x 20 mm.
5. General Cutting Capacity:
   • 90° (Straight): 155 x 25 mm / 65 x 77 mm
   • 45° Right/Left (Miter): 103 x 30 mm / 55 x 77 mm
   • 45° Inclined (Bevel): 150 x 20 mm / 90 x 50 mm
   • 45° Compound (Miter & Bevel): 75 x 20 mm
6. Operasyon: Lower the blade slowly into the workpiece, allowing the blade to reach full speed before contact. Apply steady, even pressure. Once the cut is complete, allow the blade to stop rotating before raising it from the workpiece.

6. Antretyen

Regular maintenance ensures the longevity and safe operation of your Stayer SCE 1650 WMC Miter Saw. Always unplug the tool before performing any maintenance.

• Netwayaj: Regularly clean dust and debris from the saw, especially around the motor vents, blade guard, and cutting table. Use compressed air for hard-to-reach areas.
• Enspeksyon lam: Inspect the blade before each use for sharpness, cracks, or missing teeth. Replace dull or damaged blades immediately.
• Enspeksyon bwòs: The motor uses brushes. Periodically inspect the carbon brushes for wear and replace them when they are worn down to their limit. Refer to a qualified service technician if unsure.
• Lubrifikasyon: Apply light machine oil to moving parts and pivot points as recommended in a more detailed service manual (if available) or as needed to ensure smooth operation.
• Tcheke Fastener: Periodically check all nuts, bolts, and screws for tightness. Tighten any loose fasteners.

NAN. Depanaj

Seksyon sa a adrese pwoblèm komen ou ka rankontre ak si koupe onglet ou a.

8. Espesifikasyon

Technical specifications for the Stayer SCE 1650 WMC Miter Saw:

• Modèl: SCE1650WMC
• Pouvwa: 1600 W
• Voltage: 230 Vòlt (AC)
• Vitès san chaj: 2500 – 4000 RPM (Giri/min)
• Dyamèt lam: Ø 254 mm
• Alize lam: 30 mm
• Materyèl lam: Tungsten Carbide (Widia TCT Z-52)
• Sous pouvwa: Fil elektrik
• Pwa: 16.5 kg
• Cutting Capacity (Max):
  • 90° (Straight): 155 x 25 mm / 65 x 77 mm
  • 45° Right/Left (Miter): 103 x 30 mm / 55 x 77 mm
  • 45° Inclined (Bevel): 150 x 20 mm / 90 x 50 mm
  • 45° Compound (Miter & Bevel): 75 x 20 mm

9. Garanti

STAYER products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official STAYER websit la pou plis detay sou tèm ak kondisyon garanti a. Kenbe prèv acha ou pou reklamasyon garanti.

10. Sipò

For technical assistance, spare parts, or service inquiries, please contact your local STAYER dealer or authorized service center. You can also visit the official STAYER website for further support information and contact details.

Websit: www.stayer.es (Egzample, aktyèl URL ka varye)