Manyèl Enstriksyon pou Bwat PC Sharkoon VS4-W Seri ATX/MicroATX Mid-Tower ak Fenèt Acrylic (SHA-VS4-WBK)

1. Entwodiksyon

This manual provides detailed instructions for the assembly, operation, and maintenance of your Sharkoon VS4-W Series ATX/MicroATX Mid-Tower PC Case, model SHA-VS4-WBK. Please read this manual thoroughly before beginning installation to ensure proper setup and to maximize the lifespan of your product.

The Sharkoon VS4-W Series is designed for users seeking a cost-effective and functional PC case. It features a full-black aesthetic with an acrylic side window panel, offering a clear view of your internal components. The case supports ATX and Micro-ATX motherboards and provides ample space for various components, including multiple storage drives and long graphics cards.

2. Pwodwi souview

2.1. Karakteristik kle

• Acrylic side window panel for component visibility.
• Full-black interior and exterior design.
• Support for ATX and Micro-ATX motherboards.
• Three 5.25-inch drive bays, two with tool-less mechanisms.
• Seven drive bays for storage: three 3.5-inch and four 2.5-inch.
• Generous expansion card space, up to 385mm with 2.5-inch cage removed.
• Cable management space behind the motherboard tray due to a bulged side panel design.
• Supports CPU coolers up to 160mm in height.
• Front I/O panel with 2x USB 3.0 and 2x USB 2.0 ports, plus HD Audio.
• Pre-installed 120mm front fan and 120mm blue LED rear fan.

2.2. Idantifikasyon konpozan

3. Enstalasyon ak Enstalasyon

3.1. Prepare Ka a

1. Unpack the PC case and remove all packaging materials.
2. Mete bwat la sou yon sifas ki plat e ki estab.
3. Remove the side panels by unscrewing the thumbscrews at the rear of the case.

3.2. Enstalasyon mèr

1. Enstale pwoteksyon E/S ki vini ak kat manman an nan ouvèti ki nan dèyè bwat la.
2. Ensure standoffs are correctly aligned for your ATX or Micro-ATX motherboard. Install additional standoffs if necessary.
3. Carefully place the motherboard into the case, aligning it with the standoffs and I/O shield.
4. Tache mèr la ak vis.

3.3. Enstalasyon ekipman pou pouvwa

1. Mount the power supply unit (PSU) in the designated area at the bottom rear of the case.
2. Fikse PSU a ak vis nan dèyè bwat la.
3. Route necessary power cables through the cable management cutouts.

3.4. Kondwi Enstalasyon

• 5.25-inch Drives: For tool-less bays, slide the drive in until it clicks into place. For other bays, secure with screws.
• 3.5-inch Drives: Slide the 3.5-inch drives into the designated bays and secure them.
• 2.5-inch Drives: Mount 2.5-inch SSDs/HDDs onto the dedicated mounting points.

3.5. Enstalasyon Kat Ekspansyon

1. Remove the necessary PCI slot covers from the rear of the case.
2. Insert your graphics card or other expansion cards into the appropriate PCI-E slots on the motherboard.
3. Secure the cards with screws. For longer graphics cards, the 2.5-inch drive cage can be removed to provide up to 385mm of space.

3.6. Jesyon kab

Utilize the space behind the motherboard tray and the various cable routing holes to organize cables. This improves airflow and aesthetics.

4. Operasyon Enstriksyon

Once all components are installed and connected, replace the side panels and secure them with the thumbscrews. Connect your peripherals (monitor, keyboard, mouse, etc.) to the motherboard's I/O ports. Connect the power cable to the PSU and a wall outlet. Press the power button on the front panel to start your system.

5. Antretyen

5.1. Netwayaj

• Regularly clean dust filters (if present) to maintain optimal airflow.
• Use compressed air to remove dust from internal components and fans.
• Siye deyò bwat la ak yon twal mou, damp twal. Evite pwodui netwayaj abrazif.

5.2. Antretyen fanatik

Ensure fans are free from obstructions and spinning correctly. If a fan becomes noisy or stops working, consider replacing it to maintain proper cooling.

NAN. Depanaj

6.1. Sistèm nan pa limen

• Check all power connections, including the PSU to the wall, and internal connections to the motherboard and components.
• Asire w ke kab bouton pouvwa a ki soti nan bwat la byen konekte ak konektè panèl devan kat manman an.
• Verify the PSU switch is in the 'ON' position.

6.2. Poor Airflow/Overheating

• Clean any dust filters and internal components.
• Ensure fans are operating correctly and oriented for optimal airflow (intake/exhaust).
• Improve cable management to reduce obstructions to airflow.

6.3. Front Panel USB/Audio Not Working

• Verify that the front panel USB and HD Audio cables are securely connected to the corresponding headers on your motherboard.

7. Espesifikasyon

8. Garanti ak sipò

For warranty information and technical support, please refer to the official Sharkoon websit la oubyen kontakte détayan lokal ou a. Kenbe prèv acha ou pou reklamasyon garanti.

Official Sharkoon Websit: www.sharkoon.com