Manyèl Enstriksyon pou Defiant 270 Degre Ranplasman Capteur Mouvman Deyò Nwa

1. Pwodwi souview

The Defiant DF-5716-BK is a 270-degree black replacement outdoor motion sensor designed to enhance security and convenience for outdoor lighting systems. This sensor detects motion within its specified range and activates connected lights, providing illumination when needed. It is suitable for various outdoor applications, including gardens, terraces, and walkways, and is compatible with Heath Zenith Par Lights.

Image 1: Defiant DF-5716-BK 270 Degree Black Replacement Outdoor Motion Sensor. This image displays the compact, black-colored motion sensor unit with its distinctive curved detection lens and adjustable mounting base.

2. Enfòmasyon sou Sekirite

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• AVÈTISMAN: Risk pou chòk elektrik. Dekonekte kouran an nan disjonktè a oswa bwat fizib la anvan enstalasyon oswa antretyen.
• Asire w ke tout koneksyon elektrik yo fèt an akò ak kòd ak òdonans lokal yo.
• This product is designed for outdoor use and is waterproof. However, ensure proper sealing during installation to maintain its integrity.
• Do not attempt to modify or repair the sensor. Refer all servicing to qualified personnel.
• Kenbe materyèl anbalaj lwen timoun yo.

3. Pake kontni

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• Defiant 270 Degree Replacement Motion Sensor (Model DF-5716-BK)
• Mounting hardware (typically screws and wire nuts)
• Manyèl Enstriksyon (dokiman sa a)

4. Espesifikasyon

5. Enstalasyon

This section provides general guidelines for replacing an existing motion sensor. Specific wiring diagrams may vary; always consult the original fixture's instructions or a qualified electrician if unsure.

1. Etenn pouvwa: Locate the circuit breaker or fuse that supplies power to the outdoor light fixture and turn it OFF. Verify power is off using a voltage tèsteur.
2. Retire ansyen detèktè a: Carefully disconnect the wiring from the old motion sensor. Note the wire connections (typically Line, Load, and Neutral/Ground).
3. Prepare Nouvo Capteur a: Thread the wires from the new Defiant motion sensor through the mounting plate or fixture opening.
4. Koneksyon fil elektrik:
   • Konekte a fil nwa soti nan detèktè a rive nan fil nwa (cho) soti nan ekipman pou pouvwa a.
   • Konekte a fil wouj soti nan detèktè a rive nan black (load) wire nan aparèy limyè a.
   • Konekte a fil blan soti nan detèktè a rive nan fil blan (net) from the power supply and the light fixture.
   • Konekte a fil tè (bare copper or green) from the sensor to the fixture's ground wire and the house ground wire.

   Tache tout koneksyon ak nwa fil ak tep elektrik.

5. Mount Sensor: Securely attach the new motion sensor to the fixture or mounting box using the provided hardware. Ensure it is oriented correctly for optimal detection.
6. Koneksyon sele: Apply weather-resistant sealant around the mounting base to prevent water intrusion, especially if exposed to direct weather.
7. Retabli pouvwa: Remete kouran an nan disjonktè a.

6. Enstalasyon ak Ajisteman

After installation, adjust the sensor's settings for optimal performance.

• Mode Egzamen: Most motion sensors have a test mode. Upon initial power-up, the sensor may enter a test mode where lights turn on for a short period (e.g., 5-10 seconds) with each detection, regardless of ambient light. This allows for quick aiming and sensitivity testing.
• Ajisteman sansiblite: Use the sensitivity dial (if present) to adjust how easily the sensor detects motion.
  • Turn clockwise for higher sensitivity (detects smaller movements or at greater distances).
  • Turn counter-clockwise for lower sensitivity (reduces false triggers from small animals or distant objects).
• Ajisteman tan: Use the time dial (if present) to set how long the light remains on after motion is no longer detected. Common settings range from a few seconds to several minutes.
• Light Level (Dusk-to-Dawn) Adjustment: Some sensors include a photocell adjustment to determine the ambient light level at which the sensor becomes active. This prevents the light from turning on during daylight hours.
• Aiming the Sensor: Physically adjust the sensor head to cover the desired detection area. Walk through the intended detection zone to verify coverage and make fine adjustments.

7. Operasyon Enstriksyon

Once installed and adjusted, the Defiant motion sensor operates automatically:

• During nighttime (or when ambient light is below the set threshold), the sensor will detect motion within its 270-degree, 100-foot range.
• Upon detection, the connected light fixture will illuminate for the duration set by the time adjustment dial.
• If motion continues to be detected, the light will remain on or reset its timer.
• After motion ceases and the set time expires, the light will turn off.
• During daylight hours (or when ambient light is above the set threshold), the sensor will typically remain inactive, conserving energy.

8. Antretyen

The Defiant motion sensor requires minimal maintenance to ensure continued performance.

• Netwayaj: Periodically wipe the sensor lens with a soft, damp cloth to remove dust, dirt, or debris that may obstruct its view. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Enspeksyon: Annually inspect the sensor and its wiring for any signs of damage, wear, or loose connections. Ensure the mounting remains secure.
• Obstak: Keep the detection area clear of growing foliage, branches, or other objects that could block the sensor's view oubyen lakòz fo deklanchè.

NAN. Depanaj

If your motion sensor is not functioning as expected, try the following steps:

10. Garanti ak sipò

This Defiant motion sensor comes with a 1-ane garanti limite soti nan dat acha a. Garanti sa a kouvri domaj nan materyèl ak atizan konn fè nan itilizasyon nòmal.

For warranty claims, technical assistance, or further inquiries, please contact Defiant customer support. Keep your proof of purchase for warranty validation.

Contact information for Defiant customer support can typically be found on the product packaging or the official Defiant websit.