Bromic Heating Smart-Heat Platinum 500 Radiant Infrared Patio Heater User Manual

1. Entwodiksyon

This manual provides essential information for the safe and efficient operation of your Bromic Heating Smart-Heat Platinum 500 Radiant Infrared Patio Heater. This natural gas heater delivers 39,800 BTU/hour of direct heat, designed to warm outdoor living spaces effectively. Please read all instructions carefully before installation and use.

Figi 1: Devan view of the Bromic Heating Smart-Heat Platinum 500 Radiant Infrared Patio Heater.

2. Enfòmasyon enpòtan sou sekirite

AVÈTISMAN: Enstalasyon, ajisteman, chanjman, sèvis oswa antretyen move ka lakòz blesi oswa domaj pwopriyete. Li enstriksyon enstalasyon, opere ak antretyen yo byen anvan ou enstale oswa fè sèvis pou ekipman sa a.

• Asire w ke gen bon vantilasyon lè w ap itilize aparèy chofaj la.
• Pa sere oswa itilize gazolin oswa lòt vapè ak likid ki ka pran dife nan vwazinaj sa a oswa nenpòt lòt aparèy.
• Kenbe timoun ak bèt kay lwen aparèy chofaj la pandan l ap fonksyone.
• Maintain clear distances from combustible materials as specified in the installation section.
• Pwodui sa a gen pwodui chimik ke Eta Kalifòni rekonèt kòm lakòz kansè ak domaj nesans oswa lòt pwoblèm repwodiksyon. (Avètisman Pwopozisyon 65)

3. Pwodwi Features

• Sleek Contemporary Styling: Features brushed stainless steel and tinted ceramic glass for an aesthetic design.
• Radiant Infrared Burner: Heats up quickly, providing direct heat to warm individuals in the area.
• Rezistans van: Designed to operate effectively in winds up to 12 miles per hour for consistent heating.
• Support montaj reglabl: The wall bracket houses the control system away from heat and allows the heater head to pivot 25-degrees to the left and right of center for directional heat.
• Aplikasyon versatile: Apwopriye pou enstalasyon rezidansyèl ak komèsyal tou de.
• Automatic Reignition: Provides continuous heat and convenience.
• Konstriksyon dirab: Made of stainless steel with a brushed finish.
• Electronic Ignition System: Requires 120V for operation.

Figure 2: The sleek design of the Bromic Platinum 500 heater.

4. Enstalasyon

Installation of the Bromic Smart-Heat Platinum 500 heater should be performed by a qualified and licensed professional in accordance with local codes and regulations.

4.1 Montaj Opsyon

The heater offers flexible mounting options:

• Mi monte: Utilize the provided mounting bracket. The bracket allows the heater to pivot 25 degrees left or right.
• Ceiling Suspended: Can be hung from the ceiling using an optional Ceiling Post Mount (not included).

The optimum mounting height is 8 feet from the floor to the bottom of the heater. If the distance above the heater is less than 42 inches, or if the heater will be exposed to elements, an accessory Heat Deflector must be used.

Figi 3: Side view illustrating the mounting bracket and design.

4.2 Koneksyon Gaz ak Elektrisite

• Connect to a natural gas supply. All gas connections must comply with local codes.
• The electronic ignition system requires a 120V electrical supply. Ensure proper grounding.

5. Operasyon Enstriksyon

5.1 Kòmanse aparèy chofaj la

1. Asire tiyo rezèv gaz la ouvè.
2. Activate the electronic ignition system (requires 120V). The heater features automatic reignition.
3. Allow a few minutes for the radiant elements to reach full operating temperature.

5.2 Adjusting Heat Direction

The mounting bracket allows the heater head to pivot 25 degrees to the left or right. Carefully adjust the heater's angle to direct heat to your desired area. Ensure the heater is cool before making physical adjustments.

5.3 Fèmen aparèy chofaj la

1. Deactivate the electronic ignition system.
2. Close the main gas supply valve if the heater will not be used for an extended period.

6. Antretyen

Regular maintenance ensures optimal performance and longevity of your heater. Always ensure the heater is completely cool and the gas supply is turned off before performing any maintenance.

• Netwayaj: Netwaye sifas ekstèn yo detanzantan avèk yon twal mou,amp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Seramik vè: The tinted ceramic glass should be inspected for cracks or damage. Clean gently if necessary.
• Enspeksyon brûler: Annually, have a qualified technician inspect the burner and gas connections for any blockages or wear.
• Heat Deflector: If an optional heat deflector is installed, ensure it is free from debris.

NAN. Depanaj

If you encounter issues with your heater, refer to the following common troubleshooting steps. For complex problems, contact a qualified service technician.

7.1 Heater Not Igniting

• Check if the natural gas supply valve is fully open.
• Verify that the 120V electrical supply for the electronic ignition is active.
• Ensure there are no obstructions around the burner.

7.2 Insufficient Heat Output

• Confirm the heater is positioned correctly to direct heat to the desired area.
• Check for strong winds exceeding 12 mph, which can reduce heating effectiveness.
• Ensure the area is within the recommended heating coverage of 200 square feet.

8. Espesifikasyon

Figure 4: Dimensional drawing of the heater.

9. Garanti & Sipò

For warranty information and customer support, please refer to the documentation included with your product or visit the official Bromic Heating websit. Kenbe resi acha ou pou reklamasyon garanti.