Näve 5123003

Näve 5123003 Solar LED Light Rope Bee Design Instruction Manual

Modèl: 5123003

1. Entwodiksyon

Thank you for choosing the Näve 5123003 Solar LED Light Rope Bee Design. This product is designed to provide decorative outdoor lighting using solar energy. It features 10 LED lights encased in charming bee-shaped covers, ideal for enhancing balconies, terraces, and gardens. Please read this manual carefully before installation and use to ensure proper operation and longevity of your solar lights.

2. Enfòmasyon sou Sekirite

  • Asire w ke panèl solè a mete nan yon zòn ki resevwa limyè solèy dirèk pou yon chaj optimal.
  • Do not attempt to open or modify the solar panel or battery compartment, as this may damage the product and void the warranty.
  • Kenbe pwodwi a lwen flanm dife oswa sous chalè ekstrèm.
  • This product is designed for outdoor use. While weather-resistant, avoid submerging the lights or solar panel in water.
  • Jete pil yo selon règleman lokal yo.
  • Kenbe lwen timoun ak bèt kay.

3. Pake kontni

Verifye ke tout konpozan yo prezan nan pake a:

  • 1x Solar LED Light Rope with 10 Bee Design LEDs
  • 1x Solar Panel with integrated rechargeable AA NiMH 1.2V 400mA battery
  • 1x Ground Stake for solar panel

4. Enstalasyon

  1. Depake pwodwi a: Ak anpil atansyon retire tout eleman nan anbalaj la.
  2. Assemble the Solar Panel: Attach the ground stake to the solar panel unit. Ensure it is securely fastened.
    Solar panel with ground stake and bee lights on a bush

    Image 1: Solar panel with ground stake and bee lights arranged on a bush. The solar panel should be positioned to receive maximum sunlight.

  3. Pozisyon panèl solè a: Choose a location for the solar panel where it will receive at least 6-8 hours of direct sunlight daily. Push the ground stake firmly into the soil. Avoid shaded areas from trees, buildings, or other obstructions.
  4. Fè aranjman pou limyè yo: Uncoil the light rope and arrange the bee lights as desired in your garden, on a balcony railing, or around a patio. The total length of the light rope is 380 cm, with a lead cable of 180 cm from the solar panel to the first light.
    Close-up of bee-shaped LED lights on a green bush

    Imaj 2: Gwo plan view of the individual bee-shaped LED lights, showing their design and how they can be integrated into garden decor.

  5. Inisyal chaj: Before first use, ensure the solar panel is exposed to direct sunlight for a full day (at least 8 hours) with the power switch in the "ON" position. This allows the battery to fully charge.

5. Operasyon Enstriksyon

The Näve Solar LED Light Rope is designed for automatic operation.

  • Pouvwa switch: Locate the ON/OFF switch on the back or bottom of the solar panel unit. Slide the switch to the "ON" position to activate the lights.
  • Seleksyon mòd: Some models may include a "MODE" button next to the ON/OFF switch. Press this button to cycle between continuous (steady on) and flashing light modes. If no mode button is present, the lights will operate in a single, pre-set mode.
  • Operasyon otomatik: Once activated and sufficiently charged, the lights will automatically turn on at dusk and turn off at dawn. The duration of illumination depends on the amount of sunlight received during the day.

6. Antretyen

  • Netwaye panèl solè a: Siye sifas panèl solè a regilyèman avèk yon twal mou, damp twal pou retire pousyè, salte, oswa debri. Yon panèl pwòp asire yon chajman efikas.
  • Ranplasman batri: The integrated battery is a 1x AA NiMH 1.2V 400mA rechargeable battery. If the lights' performance significantly decreases over time, the battery may need replacement.
    1. Carefully open the battery compartment on the solar panel unit (usually secured with small screws).
    2. Replace the old battery with a new rechargeable AA NiMH 1.2V 400mA battery of the same type and capacity.
    3. Ensure correct polarity (+/-) when inserting the new battery.
    4. Byen fèmen lòj batri a.
  • Depo ivè: During prolonged periods of low sunlight or harsh winter conditions, it is recommended to store the solar lights indoors. Clean the unit and store it in a dry place.

NAN. Depanaj

Pwoblèm Kòz posib Solisyon
Limyè yo pa limen lannwit.
  • Switch is OFF.
  • Pa gen ase limyè solèy pou chaje.
  • Panèl solè sal.
  • Batri a fin itilize oswa li gen pwoblèm.
  • Asire w switch la nan pozisyon "ON" an.
  • Relocate the solar panel to an area with direct sunlight.
  • Netwaye sifas panèl solè a.
  • Ranplase pil la (gade Seksyon 6).
Limyè yo fèb oswa yo rete limen sèlman pou yon ti tan.
  • Ensifizan chaj.
  • Panèl solè sal.
  • Kapasite batri a diminye.
  • Ensure solar panel receives full direct sunlight for 6-8 hours.
  • Netwaye sifas panèl solè a.
  • Ranplase pil la (gade Seksyon 6).

8. Espesifikasyon

  • Nimewo Modèl: 5123003
  • Sous limyè: 10x blan dirije
  • Batri: 1x AA NiMH 1.2 V 400 mA (rechargeable)
  • Materyèl: Plastik
  • Longè total: 380 cm (apeprè 149.6 pous)
  • Longè kab plon: 180 cm (apeprè 70.9 pous)
  • Espas ant LED: 20 cm (apeprè 7.9 pous)
  • Sous pouvwa: Solar, battery-powered
  • Wattage: 1 wat
  • Pwa atik: 7.8 ons (apeprè 221 gram)
  • Dimansyon pwodwi: 1.57 x 2.17 x 9.65 inches (solar panel unit)

9. Garanti ak sipò

For warranty information or technical support, please refer to the retailer where the product was purchased or contact Näve customer service. Keep your proof of purchase for any warranty claims.

Pou plis asistans, tanpri vizite manifakti a websit la oubyen kontakte chanèl sipò yo.

© 2023 Näve. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.