DeWalt DCB112-QW XR Lithium-Ion Multi-Voltage Manyèl Enstriksyon Batri Charger

Entwodiksyon

Thank you for choosing the DeWalt DCB112-QW XR Lithium-Ion Multi-Voltage Battery Charger. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your charger. Please read it thoroughly before use and keep it for future reference.

This charger is designed for the new XR Lithium-Ion platform, capable of charging 10.8V, 14.4V, and 18V batteries. It features a 2-stage DEWALT charging system that maximizes battery runtime and extends its lifespan. An LED indicator communicates the battery status: charging, battery issue, high or low temperature, and charge complete.

Image 1: DeWalt DCB112-QW XR Lithium-Ion Multi-Voltage Battery Charger. This image shows the front view of the charger with its distinct yellow and black casing, featuring the DeWalt logo and a battery slot.

Enstriksyon Sekirite Enpòtan

AVÈTISMAN: Li tout avètisman sekirite ak tout enstriksyon yo. Si w pa suiv avètisman ak enstriksyon yo, sa ka lakòz chòk elektrik, dife, ak/oswa blesi grav.

• Pa chaje pil ki pa rechargeable.
• Pa ekspoze plato a nan lapli oswa kondisyon mouye.
• Use only DEWALT batteries with this charger.
• Do not attempt to charge batteries in temperatures below 4°C (40°F) or above 40°C (104°F).
• Ensure the charger is unplugged before cleaning or maintenance.
• Pa sèvi ak plato a si li te resevwa yon gwo kou, si li te tonbe atè oswa si li te domaje nan nenpòt lòt fason.
• Kenbe plato a lwen timoun yo.

Enstalasyon

1. Debake: Carefully remove the charger from its packaging. Inspect for any damage that may have occurred during shipping.
2. Koneksyon pouvwa: Plug the charger into a suitable power outlet. Ensure the outlet voltage matche ak egzijans plato a.
3. Plasman: Place the charger on a stable, flat surface in a well-ventilated area, away from direct sunlight and heat sources.

Enstriksyon Operasyon

Chaje yon batri

1. Asire w ke plato a konekte nan yon priz kouran k ap travay.
2. Insert the DEWALT XR Lithium-Ion battery into the charger, aligning the battery with the charger's slot. Push firmly until it clicks into place.
3. Observe the LED indicator on the charger.

Ki ap dirije Endikatè Estati

Tan pou chaje: A 1.3Ah battery typically charges in approximately 40 minutes.

Antretyen

• Netwayaj: Disconnect the charger from the power supply before cleaning. Use a dry or slightly damp twal pou siye deyò a. Pa sèvi ak pwodui chimik ki agresif oswa pwodui netwayaj abrazif.
• Depo: Store the charger in a dry, cool place, away from direct sunlight and moisture.
• Enspeksyon: Periodically inspect the charger and its cord for any signs of damage. If damage is found, discontinue use and contact customer support.

Depanaj

Pwoblèm komen ak solisyon yo

• Charger pa travay:
  • Check if the charger is properly plugged into a live power outlet.
  • Asire w ke priz kouran an fonksyone.
• Battery not charging (LED flashing fast red):
  • The battery might be too hot or too cold. Move the battery and charger to a room temperature environment and allow it to acclimate. Charging will resume automatically.
• Battery not charging (LED flashing slow red):
  • This indicates a faulty or damaged battery. Do not attempt to charge it. Replace the battery.
• Battery not fitting into charger:
  • Ensure you are using a compatible DEWALT XR Lithium-Ion battery (10.8V, 14.4V, or 18V).
  • Check for any obstructions in the battery slot or on the battery itself.

Espesifikasyon

Garanti ak sipò

DEWALT bay yon garanti limite pou pwodwi li yo. Pou kondisyon espesifik garanti a, tanpri gade kat garanti ki vini ak pwodwi ou a oswa vizite sit entènèt ofisyèl DEWALT la. websit.

Disponibilite pyès rezèv: EU spare parts are available for a period of 1 year from the date of purchase.

For technical support, service, or to locate an authorized service center, please visit the Magazen DEWALT or contact DEWALT customer service in your region.