BLACK+DECKER D988 Finishing Attachment Sander Instruction Manual

Entwodiksyon

This manual provides essential instructions for the safe and effective use of your BLACK+DECKER D988 Finishing Attachment Sander. Please read this manual thoroughly before operating the tool and retain it for future reference.

Enfòmasyon enpòtan sou sekirite

Toujou swiv prekosyon sekirite debaz yo pou diminye risk pou dife, chòk elektrik ak blesi pèsonèl.

• Mete pwoteksyon pou je.
• Mete pwoteksyon pou tande.
• Asire w ke pyès travay la byen klèamped.
• Kenbe men yo lwen pati k ap deplase.
• Disconnect the tool from the power source before changing accessories or performing maintenance.
• Sèvi ak sèlman akseswa rekòmande.

Enstalasyon

Image showing the BLACK+DECKER D988 Finishing Attachment Sander, a compact sanding head designed to attach to a compatible power unit.

Debake

Carefully remove the finishing attachment sander and all accessories from the packaging. Inspect for any damage.

Attaching to Power Unit

The D988 is an attachment. Ensure your BLACK+DECKER power unit is compatible.

1. Align the attachment with the power unit's drive shaft.
2. Push the attachment firmly onto the power unit until it clicks into place.
3. Verify the attachment is securely fastened before use.

Attaching Sanding Sheets

The D988 uses hook-and-loop sanding sheets.

1. Ensure the power unit is disconnected from the power supply.
2. Peel off the old sanding sheet if present.
3. Align the new sanding sheet with the base of the attachment, ensuring the holes (if any) match for dust extraction.
4. Press the sanding sheet firmly onto the hook-and-loop base.

Enstriksyon Operasyon

Operasyon Jeneral

Connect the power unit to a suitable power source.

Kenbe zouti a byen fèm ak tou de men.

Place the sanding base flat on the workpiece before starting the tool.

Move the sander slowly and evenly over the surface. Avoid applying excessive pressure, as this can reduce efficiency and damage the workpiece or tool.

For optimal results, sand with the grain of the wood.

Ekstraksyon Pousyè

If your power unit or attachment has a dust extraction port, connect a suitable dust bag or vacuum cleaner to minimize dust exposure.

Antretyen

Antretyen regilye asire pèfòmans optimal epi pwolonje lavi zouti ou a.

Netwayaj

After each use, disconnect the tool from the power supply.

Siye deyò zouti a ak piblisiteamp twal. Pa sèvi ak pwodui chimik piman bouk oswa pwodui netwayaj abrazif.

Clear any dust buildup from the ventilation openings to prevent overheating.

Sanding Pad Inspection

Periodically inspect the hook-and-loop sanding pad for wear or damage. A worn pad will not hold sanding sheets effectively. Replace if necessary.

Depo

Sere zouti a nan yon kote ki sèk epi ki an sekirite, kote timoun pa ka rive.

Depanaj

Espesifikasyon

• Modèl: D988
• Mak: BLACK+DECKER
• Pwa atik: 500 gram
• Maksimòm vitès wotasyon: 10000 rpm
• ASIN: B00IQQ92IG
• Manifakti: Black & Decker

Garanti ak sipò

For warranty information or technical support, please refer to the documentation provided with your BLACK+DECKER power unit or visit the official BLACK+DECKER websit.

This attachment is covered by the standard BLACK+DECKER warranty applicable to its power tool system.