ICOM BC-152 Charger Instruction Manual

1. Entwodiksyon

This manual provides essential instructions for the safe and efficient operation of your ICOM BC-152 charger. Please read this manual thoroughly before using the charger to ensure proper setup, operation, and maintenance. Keep this manual for future reference.

2. Enfòmasyon sou Sekirite

Always observe the following safety precautions to prevent injury, damage to the charger, or damage to the device being charged.

• Use only with compatible ICOM battery packs. Using incompatible batteries may cause fire, explosion, or injury.
• Pa ekspoze chargeur a anba lapli, imidite, oswa tanperati ekstrèm.
• Pa demonte oswa modifye plato a. Konfye tout antretyen bay pèsonèl kalifye.
• Asire w vòltaj priz kouran antage koresponn ak espesifikasyon plato a.
• Kenbe plato a lwen sous chalè ak limyè solèy la dirèk.
• Debranche chargeur a nan priz kouran an lè w pa ap itilize l oswa anvan w netwaye l.

3. Enstalasyon

3.1 Debake

Carefully remove the ICOM BC-152 charger from its packaging. Verify that all components are present:

• ICOM BC-152 Charger Unit
• AC Adapter (if included)
• Manyèl Enstriksyon (dokiman sa a)

Figure 1: The ICOM BC-152 charger unit. This image shows the compact black charger with a single slot for a battery pack.

3.2 Konekte pouvwa

1. Connect the AC adapter cable to the DC input jack on the rear of the BC-152 charger unit.
2. Ploge adaptè AC a nan yon priz estanda miray.
3. Chargeur a pare pou itilize kounye a.

4. Operasyon Enstriksyon

4.1 Chaje yon pake batri

Follow these steps to charge a compatible ICOM battery pack:

1. Asire w ke plato a konekte ak yon sous kouran jan sa dekri nan Seksyon 3.2.
2. Carefully insert the battery pack into the charging slot of the BC-152 charger. Ensure it is seated firmly.
3. Observe the charging indicator light.

4.2 Endikatè Limyè

The BC-152 charger features an LED indicator to show the charging status:

• Wouj (Solid): Batri a ap chaje kounye a.
• Vèt (solid): Charging is complete. The battery pack is fully charged.
• Flache wouj: Charging error or battery fault. Remove the battery and re-insert. If the error persists, consult the troubleshooting section.
• Pa gen limyè: Charger is not connected to power, or no battery is inserted.

Charging time may vary depending on the battery's capacity and its current charge level. Typically, a fully depleted battery will take approximately 2-4 hours to charge.

5. Antretyen

5.1 Netwayaj

Pou kenbe pèfòmans ak aparans optimal:

• Always unplug the charger from the power outlet before cleaning.
• Sèvi ak yon twal mou epi sèk pou siye deyò plato a.
• Pa sèvi ak pwodui netwayaj abrazif, solvan, oswa pwodui chimik ki fò.
• Ensure no moisture enters the charging slot or power input.

5.2 Depo

When not in use for extended periods, store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Disconnect it from the power supply.

NAN. Depanaj

If you encounter issues with your BC-152 charger, refer to the table below for common problems and solutions.

7. Espesifikasyon

Note: Specifications are subject to change without notice for improvement.

8. Enfòmasyon sou Garanti

ICOM products are manufactured with high-quality components and are subject to rigorous quality control. This product is covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region. Please refer to the warranty card included with your purchase or visit the official ICOM websit pou enfòmasyon detaye sou garanti.

This warranty does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.

9. Sipò pou Kliyan

If you have any questions, require technical assistance, or need to report a problem that cannot be resolved using the troubleshooting guide, please contact ICOM customer support.

ICOM America Inc.
Visit ICOM America's Contact Page
Please have your product model (BC-152) and serial number ready when contacting support.