Puig 6789W

Puig 6789W Traffic Windscreen Instruction Manual for Honda Wave 12-13

Modèl: 6789W

1. Entwodiksyon

This manual provides detailed instructions for the proper installation, operation, and maintenance of your Puig 6789W Traffic Windscreen. This windscreen is specifically designed for Honda Wave models manufactured between 2012 and 2013. Please read this manual thoroughly before beginning installation to ensure correct assembly and safe use of the product.

2. Enfòmasyon sou Sekirite

Always prioritize safety when working on your motorcycle. Failure to follow these safety guidelines may result in injury or damage to the product or motorcycle.

  • Ensure the motorcycle is stable and on a level surface before starting installation.
  • Mete ekipman pwoteksyon pèsonèl ki apwopriye, tankou gan ak pwoteksyon pou je.
  • Do not overtighten fasteners, as this can strip threads or crack components. Refer to torque specifications if available.
  • Enspekte parbriz la ak pyès ki nan konpitè yo regilyèman pou wè si gen nenpòt siy itilizasyon, domaj oswa lach.
  • Si ou pa sèten sou nenpòt etap nan pwosesis enstalasyon an, konsilte yon mekanisyen motosiklèt kalifye.

3. Pake kontni

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact your retailer.

  • 1x Puig 6789W Traffic Windscreen (Transparent)
  • 1x Mounting Hardware Kit (brackets, bolts, washers, nuts)
  • 1x Manyèl Enstriksyon (dokiman sa a)
Image showing the Puig 6789W Traffic Windscreen and its associated mounting hardware.

Figure 1: The Puig 6789W Traffic Windscreen and its components.

4. Enstalasyon ak Enstalasyon

This section details the step-by-step process for installing the Puig 6789W Traffic Windscreen on your Honda Wave (2012-2013).

4.1. Zouti obligatwa

  • Egzagòn kle ansanm
  • Mete kle
  • Screwdriver (Phillips or flathead, as required)
  • Twal mou pou netwaye

4.2. Etap enstalasyon yo

  1. Prepare Motosiklèt la: Park the Honda Wave on a stable, level surface. Turn off the engine and remove the key.
  2. Idantifye pwen montaj yo: Locate the designated mounting points on your Honda Wave's handlebars or front fairing. These are typically existing bolt holes.
  3. Assemble Brackets: Attach the provided mounting brackets to the windscreen using the smaller bolts and washers. Do not fully tighten yet.
  4. Attach to Motorcycle: Carefully position the windscreen assembly onto the motorcycle's mounting points. Use the larger bolts, washers, and nuts to secure the brackets to the motorcycle. Hand-tighten all fasteners initially.
  5. Ajiste pozisyon: Adjust the windscreen's angle and height to your preferred riding position. Ensure it does not obstruct your view or interfere with steering.
  6. Sere final la: Once the desired position is achieved, progressively tighten all bolts and nuts. Ensure they are secure but do not overtighten. Double-check all connections.

5. Opere

Once installed, the Puig 6789W Traffic Windscreen operates passively by deflecting wind and debris. No active operation is required. Before each ride, perform a quick visual inspection to ensure the windscreen is securely attached and free from damage.

6. Antretyen

Proper maintenance will extend the life and clarity of your windscreen.

  • Netwayaj: Clean the windscreen regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic material. Rinse thoroughly and dry with a clean, soft cloth.
  • Enspeksyon: Periodically check all mounting bolts and nuts for tightness. Vibrations from riding can cause fasteners to loosen over time. Inspect the windscreen for cracks, scratches, or other damage.
  • Depo: If storing the motorcycle for an extended period, consider covering the windscreen to protect it from dust and UV exposure.

NAN. Depanaj

Seksyon sa a adrese pwoblèm komen ou ka rankontre.

PwoblèmKòz posibSolisyon
Windscreen vibrates excessivelyLoose mounting bolts; incorrect installation.Check and tighten all mounting bolts. Re-evaluate installation steps.
Reduced visibility through windscreenDirt, scratches, or improper cleaning.Clean the windscreen with mild soap and water. Avoid abrasive materials. If scratched, consider replacement.
Windscreen feels loose after ridingFasteners have loosened due to vibration.Regularly inspect and tighten all mounting hardware.

8. Espesifikasyon

KarakteristikDetay
Nimewo Modèl6789W
MakPuig
KonpatibiliteHonda Wave (2012-2013)
KoulèTransparent / Klar
MateryèlPlastik
Kalite enstalasyonVehicle-specific fit, Self-adhesive
Dimansyon pake36 x 31 x 16 cm
Pwa atik500 gram

9. Garanti ak sipò

Puig products are manufactured to high standards. For information regarding warranty coverage, claims, or technical support, please refer to the official Puig website or contact your authorized Puig dealer. Keep your proof of purchase for warranty purposes.

Manifakti: Puig

Websit: www.puig.tv

© 2023 Puig. Tout dwa rezève. Manyèl sa a se pou rezon enfòmasyon sèlman.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.