TooQ TQDS-802B Dual Bay SATA Docking Station User Manual

Entwodiksyon

This manual provides detailed instructions for the installation and operation of the TooQ TQDS-802B Dual Bay SATA Docking Station. This device allows for easy connection of 2.5-inch and 3.5-inch SATA I/II/III hard drives or solid-state drives (SSDs) to your computer via USB 3.0, and features an offline cloning function for direct drive duplication without a PC.

Kontni pake

• TooQ TQDS-802B Dual Bay SATA Docking Station
• Adaptè pouvwa (DC 12V)
• USB 3.0 Type-A to Type-B Cable
• Manyèl itilizatè

Image: Package contents including the docking station, power adapter, and USB 3.0 cable.

Pwodwi souview

Front Panel

Imaj: Devan view of the docking station. The central button serves as the Clone button, surrounded by an LED indicator.

• Endikatè ki ap dirije: Illuminates to indicate power and activity.
• Bouton Klone: Initiates the offline disk cloning process.

Panèl dèyè

Imaj: Dèyè view of the docking station, detailing the power switch, DC 12V power input, and USB-B port for computer connection.

• ON / OFF switch: Powers the docking station on or off.
• DC 12V Jack: Konekte ak adaptè kouran ki enkli a.
• USB-B pò: Connects the docking station to your computer via the USB 3.0 cable.

Top View (Drive Bays)

Imaj: Anlè view showing two drive bays, labeled A and B, designed to accommodate both 2.5-inch and 3.5-inch SATA HDDs/SSDs.

• Drive Bay A: For inserting the source drive during cloning, or a primary drive for data access. Compatible with 2.5" and 3.5" SATA drives.
• Drive Bay B: For inserting the target drive during cloning, or a secondary drive for data access. Compatible with 2.5" and 3.5" SATA drives.

Enstalasyon

1. Konekte pouvwa: Connect the included power adapter to the DC 12V jack on the rear of the docking station, then plug the adapter into a power outlet. Do not power on the device yet.
2. Konekte ak òdinatè (Si ou vle pou transfè done): If you intend to use the docking station for data transfer with a computer, connect the USB 3.0 cable from the USB-B port on the docking station to an available USB 3.0 port on your computer.
3. Mete Kondwi: Gently insert your 2.5-inch or 3.5-inch SATA hard drives or SSDs into the drive bays (A and/or B) until they are firmly seated. Ensure the SATA connectors align correctly.
4. Pouvwa sou: Flip the ON/OFF switch on the rear panel to the 'ON' position. The LED indicator will illuminate.

Enstriksyon Operasyon

A. Data Transfer (Connected to PC)

When connected to a computer via USB, the docking station functions as an external drive enclosure. Insert one or two SATA drives into the bays. Your operating system should automatically detect the drives. You can then access, read, and write data to them as you would with any other external storage device.

• Ensure the docking station is powered on and connected to your computer.
• Insert the SATA drive(s) into the bays.
• The drives will appear as removable storage in your computer's file eksploratè.
• For safe removal, always eject the drives through your operating system before powering off the docking station or disconnecting the USB cable.

B. Fonksyon Klonaj Offline

The offline clone function allows you to duplicate a source drive to a target drive without needing a computer connection. The target drive must be equal to or larger in capacity than the source drive.

1. Prepare Kondwi yo: Ensure both the source drive (the drive you want to copy FROM) and the target drive (the drive you want to copy TO) are free of errors. All data on the target drive will be erased during the cloning process.
2. Mete Kondwi:
   • Mete la Sous Drive nan Bay A.
   • Mete la Sib Drive nan Bay B.
3. Dekonekte ak PC a: Ensure the USB cable is disconnected from the computer. The docking station must be operating independently for offline cloning.
4. Pouvwa sou: Turn on the docking station using the ON/OFF switch.
5. Kòmanse Klonaj: Peze epi kenbe la Klonaj bouton for approximately 3-5 seconds until the LED indicator begins to flash. Release the button.
6. Siveye Pwogrè: The LED indicator will show the cloning progress. It will typically flash or change color to indicate different stages (e.g., 25%, 50%, 75%, 100%).
7. Konplete: Once the cloning process is complete, the LED indicator will stop flashing and remain solid. You can then power off the docking station and remove the drives.

Important: Do not interrupt the cloning process by powering off the device or removing drives, as this may lead to data corruption on both drives.

Antretyen

• Keep the docking station in a clean, dry environment, away from direct sunlight and extreme temperatures.
• Evite jete oswa sibi aparèy la nan gwo enpak.
• Netwaye deyò a avèk yon twal mou epi sèk. Pa sèvi ak pwodui netwayaj likid oswa solvan.
• Asire w ke gen bon vantilasyon toutotou aparèy la pandan l ap fonksyone.

Depanaj

Drive Not Detected by Computer

• Ensure the docking station is powered on and the USB cable is securely connected to both the docking station and the computer.
• Eseye konekte nan yon pò USB diferan sou òdinatè w lan.
• Verify that the hard drive is properly seated in the bay.
• Check Disk Management (Windows) or Disk Utility (macOS) to see if the drive is recognized but unformatted or unallocated.
• Test the drive directly in a computer or with another enclosure to rule out drive failure.

Offline Clone Fails or Does Not Start

• Ensure the USB cable is disconnected from the computer. Offline cloning requires the device to be standalone.
• Verify that the source drive is in Bay A and the target drive is in Bay B.
• Konfime ke kapasite disk sib la egal a oswa pi gran pase kapasite disk sous la.
• Ensure both drives are properly inserted and seated.
• Press and hold the Clone button for the specified duration (3-5 seconds) until the LED indicator responds.
• Check for any errors on the source drive before attempting to clone.

Espesifikasyon

Image: Dimensions of the TooQ TQDS-802B Dual Bay SATA Docking Station.

Garanti ak sipò

TOOQ products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official TOOQ website. For technical support or further assistance, please contact TOOQ customer service through their official channels.

Manufacturer: Tooq & Nanocable Spain