Manyèl Itilizatè Chofaj Distribitè Dlo Cho Adcraft WB-100 pou Ranpli Manyèlman Ti Volim

Entwodiksyon

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Adcraft WB-100 Low Volume Manual Fill Hot Water Dispenser Boiler. Please read this manual thoroughly before initial use and retain it for future reference.

Imaj: Devan view of the Adcraft WB-100 Hot Water Dispenser Boiler, showcasing its stainless steel construction, water level gauge, spigot, and temperature control knob.

Enstriksyon Sekirite Enpòtan

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using electrical appliances. This appliance heats water to high temperatures; exercise extreme caution.

• Li tout enstriksyon anvan ou itilize.
• Pa manyen sifas cho. Sèvi ak manch oswa bouton.
• Pou pwoteje kont danje elektrik, pa plonje kòd, ploge, oswa aparèy la nan dlo oswa lòt likid.
• Sipèvizyon sere se nesesè lè nenpòt aparèy itilize pa oswa toupre timoun yo.
• Debranche soti nan priz lè yo pa itilize ak anvan netwaye. Kite refwadi anvan ou mete oswa retire pati yo, epi anvan ou netwaye aparèy la.
• Pa opere nenpòt aparèy ki gen yon kòd oswa ploge ki domaje, oswa apre aparèy la fonksyone mal oswa li te domaje nan nenpòt fason.
• Sèvi ak atachman akseswar ki pa rekòmande pa manifakti aparèy la ka lakòz blesi.
• Pa sèvi ak deyò.
• Pa kite kòd pandye sou kwen tab oswa kontwa, oswa manyen sifas cho.
• Pa mete sou oswa toupre yon gaz cho oswa recho elektrik, oswa nan yon fou chofe.
• Toujou branche ploge a nan aparèy la an premye, answit branche kòd la nan priz miray la. Pou dekonekte li, vire nenpòt kontwòl sou "off", epi retire ploge a nan priz miray la.
• Pa sèvi ak aparèy pou lòt itilizasyon ki gen entansyon an.

Enstalasyon ak Premye Itilizasyon

1. Debake: Carefully remove the hot water dispenser from its packaging. Retain packaging materials for future storage or transport.
2. Enspeksyon: Inspect the unit for any signs of damage. If damaged, do not operate and contact your supplier.
3. Plasman: Place the unit on a stable, level, heat-resistant surface. Ensure there is adequate clearance around the unit for ventilation. The non-slip rubber feet provide stability.
4. Netwayaj inisyal: Before first use, wash the interior of the dispenser and the lid with warm, soapy water. Rinse thoroughly and dry.
5. Koneksyon pouvwa: Ensure the power switch is in the "OFF" position. Plug the 3-foot power cord (NEMA 5-15 plug) into a grounded 120V AC electrical outlet. The unit requires 1350W and 11.25 Amps.

Enstriksyon Operasyon

1. Ranpli inite a: Remove the lid and manually fill the dispenser with clean water. Do not fill above the "MAX" fill line indicated on the interior or water level gauge. The unit has a 100-cup (6.25 gallon) capacity.
2. Sekirize kouvèti a: Place the lid securely back onto the dispenser.
3. Limen: Flip the illuminated power switch to the "ON" position. The switch will light up, indicating the unit is receiving power and beginning to heat.
4. Mete Tanperati: Use the variable temperature control knob located at the base of the unit to select your desired water temperature. The range is from 85°F to 220°F.


Imaj: Gwo plan view of the variable temperature control knob, allowing adjustment of water temperature between 85°F and 220°F.

5. Pwosesis chofaj: The unit will begin heating the water. The extra-large encapsulated heating element ensures fast and even heating. Monitor the water level gauge on the side of the unit.
6. Distribisyon dlo cho: Once the desired temperature is reached, place a cup or container under the spigot. Push down the lever on the spigot to dispense hot water. Release the lever to stop the flow.


Imaj: Gwo plan view of the dispensing spigot and the clear water level gauge, which allows monitoring of the water volume inside the boiler.

7. Ranpli: If the water level becomes low, turn off the unit, unplug it, and allow it to cool slightly before refilling.
8. Transpò: Use the cool-to-touch bakelite handles for safe transportation of the unit when empty or cool.

This hot water dispenser is suitable for preparing various hot beverages and foods, including tea, coffee, instant noodles, and soups. It can also be used to keep sauces like Au Jus or barbecue sauce warm.

Swen ak Antretyen

Regular cleaning and maintenance will ensure the longevity and optimal performance of your Adcraft hot water dispenser.

1. Netwayaj chak jou:
   • Toujou deploge inite a epi kite l refwadi nèt anvan w netwaye.
   • Vide tout dlo ki rete a.
   • Wash the interior and exterior stainless steel surfaces with a mild detergent and a soft cloth or sponge.
   • Rinse thoroughly with clean water. Do not immerse the electrical base in water.
   • Dry all surfaces completely before storing or next use.
2. Detartraj: Over time, mineral deposits (limescale) may build up, especially in hard water areas.
   • To descale, fill the unit with a solution of equal parts white vinegar and water.
   • Heat the solution to approximately 150°F (65°C) and let it stand for 30-60 minutes. Do not boil.
   • Drain the solution and rinse the interior several times with fresh water to remove any vinegar residue.
   • Repete si sa nesesè.
3. Depo: Store the clean and dry unit in a cool, dry place.

Depanaj

Anvan ou kontakte sèvis kliyan, tanpri gade pwoblèm ak solisyon komen sa yo:

For issues not listed here or if troubleshooting steps do not resolve the problem, please contact Adcraft customer support.

Espesifikasyon pwodwi

• Modèl: WB-100
• Kapasite: 100 Cups (approximately 6.25 Gallons)
• Materyèl: Konstriksyon asye pur
• Pouvwa: 120V, 1350W, 11.25 Amps
• Kalite ploge: NEMA 5-15
• Ranje Tanperati: 85°F - 220°F (30°C - 104°C)
• Dimansyon (L x W x H): 12.6 x 10.83 x 22.91 pous
• Pwa: 1 Pound (approximate, unit weight only)
• Sètifikasyon: ETL Listed, ETL Sanitation, NSF
• Karakteristik espesyal: Temperature Control, Water Level Indicator, Heat-resistant side handles, Illuminated power switch.

Garanti ak sipò

This Adcraft WB-100 Hot Water Dispenser Boiler is covered by the Adcraft One-Year Limited Warranty. This warranty covers defects in material and workmanship under normal use for a period of one year from the date of purchase.

For warranty claims, technical support, or to inquire about replacement parts, please contact Adcraft customer service. Please have your model number (WB-100) and proof of purchase available when contacting support.

Contact information for Adcraft can typically be found on their official websit la oubyen sou anbalaj pwodwi a.