Ryobi 140132007 4V Lithium Charger Instruction Manual

1. Pwodwi souview

The Ryobi 140132007 is a replacement 4V Lithium Charger designed for various Ryobi TEK4 tools. This charger is essential for maintaining the power of your compatible Ryobi 4V lithium-ion batteries.

Sa ki enkli:

• 1 x Ryobi 140132007 Charger

Image: The Ryobi 140132007 4V Lithium Charger, a compact black unit with a charging port.

2. Enfòmasyon sou Sekirite

Please read and understand all safety instructions before using this charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Itilize andedan kay la sèlman: Chajè sa a fèt pou itilizasyon andedan kay la nan kondisyon sèk. Pa ekspoze l anba lapli oswa kondisyon mouye.
• Kòrèk Voltage: Asire sous pouvwa voltage matche ak egzijans plato a.
• Evite domaj: Do not operate the charger if it has received a sharp blow, been dropped, or damaged in any way.
• Kenbe sèk: Pa janm plonje plato a nan dlo oswa nan nenpòt lòt likid.
• Dekonekte lè yo pa itilize: Toujou debranche chargeur a nan priz kouran an lè w pa ap itilize l oswa anvan w netwaye l.
• Timoun: Kenbe plato a soti nan atenn timoun yo.
• Batri konpatib: Only charge Ryobi AP4001 4V lithium-ion batteries with this charger. Attempting to charge other battery types may cause personal injury and damage.

3. Enstalasyon

1. Depale chajè a: Retire plato a nan anbalaj li avèk prekosyon. Enspekte li pou wè si li gen nenpòt siy domaj.
2. Konekte ak pouvwa: Plug the charger into a standard 120V AC electrical outlet.
3. Identify Battery: Ensure you are using a compatible Ryobi AP4001 4V lithium-ion battery. The battery is not included with the charger.

4. Operasyon Enstriksyon

Follow these steps to charge your Ryobi 4V lithium-ion battery:

1. Mete batri: Align the Ryobi AP4001 4V battery with the charging port on the 140132007 charger. Push the battery firmly into the charger until it clicks into place.
2. Endikasyon chaje: The charger typically has an indicator light (not specified in product details, refer to your battery's manual for specific battery charge indicators) that will illuminate to show charging is in progress.
3. Tan pou chaje: A fully discharged Ryobi AP4001 4V battery will take approximately 12 hours to fully charge.
4. Retire batri: Once charging is complete, disconnect the battery from the charger by pressing any release tabs (if present on the battery) and pulling the battery out. Unplug the charger from the power outlet.

5. Konpatibilite

This Ryobi 140132007 charger is compatible with the Ryobi AP4001 4V lithium-ion battery and the following Ryobi TEK4 tools:

• Ryobi HP53L 4V Lithium-Ion Reversible Screwdriver
• RP4205 TEK4 Inspection Scope
• RP4206 4V Lithium Ion Inspection Tool
• HP53LK 4V Reversible Screwdriver
• AP4800 TEK4 4 Volt Charger (This charger is a replacement for AP4800)
• HP64L 4 Volt Right Angle Driver
• RP4450 TEK4 4 Volt LED Flashlight
• RP4470 TEK4 4 Volt LED Jobsite Light
• RP4510 TEK4 MP3 Player

6. Antretyen

Bon antretyen asire lonjevite ak fonksyònman an sekirite nan plato ou a.

• Netwayaj: Disconnect the charger from the power supply before cleaning. Use a dry, soft cloth to wipe the exterior of the charger. Do not use harsh chemicals or abrasive cleaners.
• Depo: Store the charger in a dry, indoor location away from direct sunlight, moisture, and extreme temperatures.
• Enspeksyon: Periodically inspect the charger and its cord for any signs of damage, such as cuts, frayed wires, or cracked housing. If damage is found, discontinue use and replace the charger.

NAN. Depanaj

Si ou rankontre pwoblèm ak plato ou a, gade pwoblèm ak solisyon komen sa yo:

• Batri pa chaje:
  • Ensure the charger is securely plugged into a working electrical outlet.
  • Verify the battery is correctly inserted into the charger.
  • Check the battery for damage. A damaged battery may not charge.
  • Confirm the battery is a compatible Ryobi AP4001 4V lithium-ion battery.
• Chaje dousman:
  • Ensure the charger is operating within its specified temperature range. Extreme temperatures can affect charging efficiency.
  • Verify the power outlet is providing stable voltage.

If troubleshooting steps do not resolve the issue, contact Ryobi customer support or a qualified service technician.

8. Espesifikasyon

9. Garanti ak sipò

Specific warranty information for the Ryobi 140132007 charger is typically provided with the product packaging or can be found on the official Ryobi websit la. Tanpri konsève prèv acha ou a pou reklamasyon garanti.

For technical assistance, replacement parts, or further inquiries, please contact Ryobi customer support through their official channels. Always refer to the original owner's manual for your specific Ryobi tool for complete information.