Juno Lighting TL602E LED-Compatible Driver Instruction Manual

Entwodiksyon

The Juno Lighting TL602E is an LED-compatible driver designed to power various Juno lighting products, including solo task lights, mini LED recessed fixtures, and gimbal fixtures. This versatile driver can also operate other low voltage LED or incandescent loads, provided they fall within its rated capacity of 0.5 watts to a maximum of 60 watts. It is IC rated, allowing for installation surrounded by insulation in recessed applications. The TL602E is compatible with specific dimmers tested and qualified by Juno for use with Juno LED fixtures.

Image: Juno Lighting TL602E LED-Compatible Driver, a compact white electrical component.

Enfòmasyon enpòtan sou sekirite

• Always disconnect power at the circuit breaker before installing or servicing any electrical fixture.
• Enstalasyon an dwe fèt pa yon elektrisyen kalifye, dapre kòd elektrik nasyonal ak lokal yo.
• Pa depase wat maksimòm lantagEvalyasyon 60 Watt.
• Asire w ke tout koneksyon an sekirite epi byen izole.
• Aparèy sa a fèt pou itilize andedan kay la sèlman.

Enstalasyon ak Enstalasyon

Konpatibilite

This driver is compatible with Juno solo task lights, Juno mini LED recessed fixtures, and Juno gimbal fixtures. It can also be used with other low voltage LED or incandescent loads. For specific compatibility with dimmers, refer to the specification sheets of the Juno LED fixtures you intend to use.

Enstriksyon fil elektrik

1. Asire w ke disjonktè a koupe anvan ou kòmanse enstalasyon an.
2. Connect the input wires of the TL602E driver to the appropriate 120V AC power supply, following local electrical codes.
3. Connect the output wires of the TL602E driver to your compatible low voltage LED or incandescent lighting fixtures. Ensure the total wattage of connected fixtures does not exceed 60 watts.
4. Secure all wire connections with appropriate connectors.
5. Mount the driver securely in a suitable location. The IC rating allows it to be surrounded by insulation in recessed applications.
6. Yon fwa tout koneksyon yo fèt epi yo byen sere, retabli kouran an nan disjonktè a.

Enstriksyon Operasyon

Once properly installed and connected to compatible lighting fixtures, the Juno TL602E driver operates automatically when power is supplied. If connected to a compatible dimmer switch, the brightness of the connected LED or incandescent fixtures can be adjusted via the dimmer control.

Antretyen

The Juno TL602E LED-Compatible Driver requires minimal maintenance.

• Periodically inspect the driver and its connections for any signs of damage or wear.
• Ensure the area around the driver is free from obstructions to allow for proper heat dissipation.
• Clean the exterior of the driver with a soft, dry cloth if necessary. Do not use liquid cleaners or solvents.

Depanaj

If your Juno TL602E LED-Compatible Driver or connected fixtures are not functioning as expected, consider the following:

• Pa gen pwodiksyon limyè:
  • Check if the power supply to the driver is active.
  • Verifye tout koneksyon fil elektrik yo byen fèm epi kòrèk.
  • Ensure the connected lighting fixtures are compatible and not faulty.
  • Konfime kantite total latage of connected fixtures does not exceed the driver's 60-watt maximum load.
• Limyè k ap tranbleman:
  • Ensure the dimmer switch, if used, is compatible with Juno LED fixtures and the TL602E driver.
  • Tcheke pou koneksyon fil elektrik ki lach.
  • Verify the connected fixtures are not exceeding the driver's load capacity.
• Surchof:
  • Ensure adequate ventilation around the driver.
  • Confirm the total load does not exceed 60 watts.

If issues persist, consult a qualified electrician or contact Juno Lighting customer support.

Espesifikasyon

Enfòmasyon sou Garanti

Juno Lighting Group warrants that its products are free from defects in material and workmanship. Juno Lighting Group's obligation is expressly limited to repair or replacement, without charge, at Juno Lighting Group's factory after prior written return authorization has been granted. This warranty shall not apply to products which have been altered or repaired outside of Juno Lighting Group's factory. This warranty is in lieu of all other warranties, expressed or implied, and without limiting the generality of the foregoing phrase, excludes any implied warranty of merchantability. Also, there are no warranties which extend beyond the description of the product on the company's literature setting forth terms of sale. The warranty period for all JLG products is one (1) year from date of purchase.

Sipò

For further assistance, technical support, or warranty claims, please visit the official Juno Lighting websit oswa kontakte depatman sèvis kliyan yo.

Visit the Juno Store on Amazon