ADT Commercial Ice Machine User Manual

Entwodiksyon

Thank you for choosing the ADT Commercial Ice Machine, Model HZB-36F. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new ice maker. Please read this manual thoroughly before operating the appliance and retain it for future reference.

This commercial ice machine is designed to produce up to 80 lbs of clear ice cubes daily, with a storage capacity of 20 lbs. Its compact design allows for flexible installation as an undercounter or freestanding unit.

Enfòmasyon enpòtan sou sekirite

Please read all safety warnings and instructions carefully before use to prevent potential hazards and ensure proper operation.

• Asire w ke aparèy la byen chita.
• Pa sèvi ak machin glas la si kòd kouran an oswa ploge a domaje.
• Kenbe ouvèti vantilasyon yo klè ak obstak.
• Pa sere sibstans eksplozif tankou bwat ayewosòl ak yon pwopilsif ki ka pran dife nan aparèy sa a.
• Aparèy sa a fèt pou itilizasyon komèsyal.
• Toujou dekonekte ekipman pou kouran an anvan ou netwaye oswa fè antretyen.
• If your drain outlet height is more than 5.9 inches, a drain pump must be configured. The drain outlet should be no further than 12 inches from the ice machine. Failure to do so may result in water leakage.

Pwodwi souview

The ADT Commercial Ice Machine HZB-36F features a durable stainless steel exterior and an intuitive LCD control panel for ease of use.

Karakteristik kle:

• Fè glas rapid: Produces 40 clear ice cubes per cycle in 11-20 minutes, with a daily output of up to 80 lbs. Each cube weighs 9g.
• Enstalasyon fleksib: Dimensions of 14.96"W x 19.29"D x 33.85"H (including 1.18" adjustable feet) allow for undercounter or freestanding placement. Features a front breathing design.
• Ekspozisyon LCD: User-friendly control panel for power, delay, cleaning, and ice cube size adjustments.
• Konsepsyon dirab: Stainless steel door with a full-length handle and bright blue LED interior lighting.

Enstalasyon ak Enstalasyon

Proper installation is crucial for the performance and longevity of your ice machine. Please follow these steps carefully.

Debake:

1. Retire tout materyèl anbalaj yo avèk prekosyon.
2. Inspect the ice machine for any shipping damage. Report any damage to your supplier immediately.
3. Ensure all accessories are present: Ice Scoop, In-Line Hose, Drain Hose.

Kondisyon pou Kote yo:

• Place the ice machine on a flat, stable surface.
• Ensure adequate ventilation around the unit. The front breathing design allows for built-in installation, but clearances should still be maintained as per local codes.
• Evite limyè solèy la dirèk oswa sous chalè.
• The ambient temperature should be between 50°F (10°C) and 90°F (32°C).

Koneksyon Dlo ak Drenaj:

1. Connect the supplied in-line hose to a potable water supply. Ensure the water pressure is within the recommended range (15-80 PSI).
2. Konekte kawotchou drenaj la nan yon drenaj apwopriye. Enpòtan: If your drain outlet height is more than 5.9 inches, or if the drain outlet is further than 12 inches from the ice machine, a separate drain pump dwe be installed. This unit does not include a built-in drain pump.
3. Asire w ke tout koneksyon an sekirite epi san koule.

Koneksyon elektrik:

• Plug the ice machine into a dedicated, grounded 115V AC outlet.
• Pa sèvi ak kòd ekstansyon oswa ploge adaptè.

Enstriksyon Operasyon

Familiarize yourself with the control panel and basic operations.

Control Panel (Refer to Figure 3):

• Bouton pouvwa (ON/OFF): Peze pou limen oswa etenn inite a.
• Anviwònman revèy: Allows you to set a time for the unit to turn on or off automatically.
• Ice Making Time Adjustment (+/-): Increase or decrease the ice making time to adjust ice cube size. Longer time results in larger cubes.
• Fonksyon Netwayaj: Press and hold the power button for automatic cleaning.

Operasyon inisyal:

1. After connecting water and power, press the Power button to turn on the unit.
2. The ice making process will begin automatically. The first few cycles may produce smaller or irregular ice cubes. This is normal.
3. Allow the unit to run for several hours to stabilize ice production.

Ice Making Reservation:

The unit supports setting a reservation time for ice making, allowing you to schedule when the ice production starts or stops.

Antretyen ak netwayaj

Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your ice machine.

Antretyen chak jou:

• Siye eksteryè a ak yon mou, damp twal.
• Ensure the ice scoop is clean and stored hygienically.

Weekly/Bi-Weekly Cleaning:

• Empty the ice storage bin and clean it with a mild detergent and warm water. Rinse thoroughly.
• Clean the water reservoir and ice making components.

Fonksyon Netwayaj Otomatik:

The ice machine is equipped with an auto-cleaning feature for convenience.

1. Asire w ke bwat glas la vid.
2. Add a small amount of ice machine cleaner (food-grade) to the water reservoir as per cleaner instructions.
3. Press and hold the "Clean" button (often integrated with the Power button, refer to Figure 3) to activate the auto-cleaning cycle.
4. Once the cycle is complete, drain the cleaning solution and rinse the unit thoroughly with fresh water by running several ice-making cycles and discarding the ice.

Netwayaj kondansasyon:

Periodically clean the condenser coils to ensure efficient operation. This should be done by a qualified technician or by following specific instructions in a more detailed service manual.

Depanaj

Anvan ou kontakte sèvis kliyan, tanpri gade tablo ki anba a pou pwoblèm komen ak solisyon yo.

Espesifikasyon

Garanti ak sipò pou kliyan

For warranty information, please refer to the warranty card included with your product or contact ADT customer support directly. Keep your proof of purchase for any warranty claims.

If you encounter issues not covered in the troubleshooting section or require further assistance, please contact ADT customer support. Contact details can typically be found on the manufacturer's websit la oubyen sou anbalaj pwodwi a.

For the latest information and support, please visit the official ADT websit la oubyen kontakte liy sèvis kliyan yo.