Amped Wireless REC10

AmpManyèl Itilizatè ed Wireless REC10 Ekstansyon Range Wi-Fi Konpak Segondè Pwisans 600mW

Model: REC10

1. Entwodiksyon

La Amped Wireless REC10 High Power 600mW Compact Wi-Fi Range Extender is designed to expand the range of your existing 802.11b/g/n wireless network. It repeats the signal from your wireless router, redistributing it to new, extended locations, providing up to 6,500 sq ft of additional Wi-Fi coverage. This manual provides essential information for setting up, operating, and maintaining your device.

2. Pake kontni

  • 1 x High Power 600mW Compact Wi-Fi Range Extender
  • 1 x Detachable High Gain 2dBi Antenna
  • 1 x Setup Guide
  • 1 x CD: Users Guide, Installation Video

3. Pwodwi souview

The REC10 features advanced dual 600mW amplifiers and a high gain 2dBi detachable antenna to significantly boost your Wi-Fi signal. Its compact, plug-in design allows for discreet placement in any room. The device also includes a wired Ethernet port for connecting additional network devices.

Amped Wireless REC10 Wi-Fi Range Extender plugged into a wall outlet with its antenna

Figi 1: Devan view nan la Amped Wireless REC10 Wi-Fi Range Extender, showing it plugged into a wall outlet with its antenna attached.

Amped Wireless REC10 Wi-Fi Range Extender showing the wired Ethernet port, reset button, and WPS button

Figi 2: Top view nan la Amped Wireless REC10 Wi-Fi Range Extender, highlighting the wired Ethernet port, reset button, and WPS button.

4. Enstalasyon

Setting up your REC10 Range Extender is a straightforward process that can be completed wirelessly using a tablet, smartphone, or laptop. Follow these general steps:

  1. Plug the REC10 into a power outlet.
  2. Connect your device (tablet, smartphone, or laptop) to the Range Extender's Wi-Fi network.
  3. Louvri a web browser and navigate to the setup URL provided in the Setup Guide.
  4. Access the Setup Wizard, scan for your existing wireless network, and select it.
  5. Swiv envit ki sou ekran yo pou konplete konfigirasyon an.

For detailed, step-by-step instructions, please refer to the included Setup Guide or the User Guide on the provided CD.

5. Operasyon Enstriksyon

Once the REC10 is successfully set up, it will automatically extend your Wi-Fi network, providing enhanced coverage. You can now enjoy seamless internet access for your devices throughout your home or office.

Konekte aparèy filaire

The Range Extender includes a wired Ethernet port (RJ-45 10/100 LAN) located on the device. This port allows you to connect and bridge an additional network device, such as a PC, server, printer, Internet-enabled television, Blu-ray player, or game console, directly to your extended Wi-Fi network.

6. Antretyen

Pou asire pèfòmans optimal ak lonjevite ou Amped Wireless REC10, consider the following maintenance tips:

  • Plasman: Kenbe aparèy la nan yon zòn ki byen ayere, lwen limyè solèy dirèk, sous chalè ak imidite.
  • Netwayaj: Sèvi ak yon twal mou epi sèk pou netwaye deyò aparèy la. Pa sèvi ak pwodui netwayaj likid oswa ayewosòl.
  • Mizajou mikrolojisyèl: Tcheke detanzantan Amped Wireless website for available firmware updates. Keeping your device's firmware up-to-date can improve performance, add new features, and enhance security.
  • Sik pouvwa: If you experience minor performance issues, try power cycling the device by unplugging it from the outlet for 10 seconds and then plugging it back in.

NAN. Depanaj

Si ou rankontre nenpòt pwoblèm ak ou Amped Wireless REC10, please refer to the following common troubleshooting steps:

  • Pa gen aksè entènèt: Ensure the Range Extender is properly connected to your main Wi-Fi router. Check the status lights on the extender to confirm it's receiving a signal. Try restarting both the extender and your main router.
  • Pòv fòs siyal: Relocate the extender to a position that is roughly halfway between your main router and the area where you need improved coverage. Avoid placing it near large metal objects or other electronic devices that may cause interference.
  • M pa ka jwenn aksè nan paj konfigirasyon an: Verify that your device is connected to the extender's Wi-Fi network (usually named 'Amped_Wireless_2.4GHz' or similar) and that you are entering the correct setup URL.
  • Modpas bliye: If you forget your extender's administrative password, you may need to perform a factory reset. Refer to the User Guide for instructions on how to reset the device.

For more comprehensive troubleshooting and support, consult the detailed User Guide on the included CD or visit the Amped Wireless support websit.

8. Espesifikasyon

KarakteristikDeskripsyon
ModèlREC10
TeknolojiWireless-N
Bann2.4GHz, 802.11 b/g/n
Vitès san fil300Mbps (Rx), 300Mbps (Tx)
Antèn1 x Detachable High Gain 2dBi Antenna, 1 x Internal High Gain Antenna
Pò Ethernet1 x RJ-45 10/100 (LAN)
AmplifikatèDual 2.4GHz 600mW Amplifiers, Dual Low Noise Amplifikatè
Kondisyon pou EnstalasyonWireless 802.11b/g/n 2.4GHz network, computer, tablet or smartphone with Wi-Fi access and a web navigatè
OS konpatibiliteWorks with all OS, including Windows and Mac
Pwa atik1 liv
Dimansyon pwodwi9.25 x 7.5 x 2.6 pous

9. Garanti ak sipò

La Amped Wireless REC10 comes with the Amped Wireless Range Increase Guarantee, ensuring guaranteed performance and results. Amped Wireless is committed to providing excellent customer service and technical support.

  • Elite Support: Enjoy free, US-based, in-house technical support 7 days a week.
  • Dokimantasyon: Please refer to the User Manual and the User Guide (on the included CD) for comprehensive information and assistance.

Pou plis sipò, tanpri vizite sit ofisyèl la Amped Wireless websit la oubyen kontakte sèvis kliyan yo dirèkteman.

© 2026 Amped Wireless. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.