Dataprobe iBoot-G2+ Web Power Switch User Manual

Entwodiksyon

The Dataprobe iBoot-G2+ is a web-enabled power switch designed for remote power control and management of connected devices. It features a single NEMA 5-15 circuit outlet, allowing users to remotely reboot, power on, or power off equipment from any location via a web browser or the iBoot Cloud Service. This device is ideal for managing remote servers, network equipment, or any device that benefits from automated power cycling to ensure continuous operation and minimize downtime. The iBoot-G2+ also includes two expansion I/O ports for custom integration with external sensors or alarms, providing enhanced flexibility for various applications.

Enstalasyon ak Enstalasyon

Kontni pake

• iBoot-G2+ Web Power Switch Unit
• Kòd pouvwa
• Ethernet kab
• Terminal Blocks for Expansion Ports (2)

Figure 1: iBoot-G2+ unit with standard accessories.

Koneksyon fizik

1. Konekte pouvwa: Plug the provided power cord into the A/C Input port on the iBoot-G2+ and then into a standard wall outlet.
2. Konekte rezo: Connect an Ethernet cable from your network router or switch to the Ethernet port on the iBoot-G2+. Ensure your network has DHCP enabled for automatic IP address assignment.
3. Konekte aparèy: Plug the device you wish to control into the A/C Output port of the iBoot-G2+.

Figure 2: Rear and Front View of iBoot-G2+ showing A/C Input, A/C Output, Ethernet, and Expansion Ports.

Figi 3: Detaye view of the A/C Output and Expansion I/O Ports (EXP1, EXP2) on the iBoot-G2+.

Konfigirasyon Inisyal (Web Entèfas)

Once connected, the iBoot-G2+ will obtain an IP address from your network's DHCP server. You can discover its IP address using the iBoot Discovery Tool (available on the Dataprobe website) or by checking your router's connected devices list.

1. Louvri a web browser and enter the iBoot-G2+'s IP address in the address bar.
2. Log in using the default credentials (refer to the included quick start guide for default username and password).
3. It is highly recommended to change the default password immediately for security purposes.
4. Configure network settings (e.g., static IP, DNS) if required for your network environment.

Ekspansyon I/O Pò

The iBoot-G2+ features two expansion I/O ports (EXP1 and EXP2) for integrating external devices such as sensors or alarms. These ports allow for customized power management solutions based on external triggers. Refer to the advanced user guide on the Dataprobe website for detailed instructions on configuring and utilizing these ports.

Operating the iBoot-G2+

Kontwòl pouvwa Remote

The primary function of the iBoot-G2+ is to provide remote control over the power to a connected device. This can be done via the web interface or the iBoot Cloud Service.

• Pouvwa sou: Applies power to the connected device.
• Pouvwa Off: Removes power from the connected device.
• Power Cycle (Reboot): Briefly removes power and then reapplies it, effectively rebooting the connected device. This is a common operation for unresponsive network equipment.

AutoPing Reboot Feature

The AutoPing feature allows the iBoot-G2+ to automatically monitor the responsiveness of a network device (e.g., a router or server) by continuously sending ping requests to a specified IP address. If the device fails to respond after a configurable number of attempts or duration, the iBoot-G2+ will automatically power cycle the connected equipment.

• Configure target IP addresses for ping monitoring.
• Set the ping interval and the number of failed pings before a power cycle is initiated.
• This feature ensures minimal downtime for critical network components.

iBoot Cloud Service Access

Dataprobe offers a free iBoot Cloud Service that provides secure, centralized power control and monitoring for multiple iBoot devices from anywhere. This service simplifies management, especially for deployments with numerous iBoot units across different locations.

Figure 4: iBoot Cloud Service for centralized management.

• Register your iBoot-G2+ with the iBoot Cloud Service.
• Manage devices, view status, and perform power operations through a single web koòdone.

Avètisman an tan reyèl

The iBoot-G2+ can send instant notifications via email or SMS for various events, including power status changes, automatic reboots, or network connectivity issues. This keeps you informed about the status of your connected equipment and the iBoot-G2+ itself.

• Configure alert recipients and notification types in the web koòdone.
• Customize which events trigger alerts.

Antretyen

The iBoot-G2+ is designed for reliable, low-maintenance operation. Regular maintenance primarily involves ensuring proper ventilation and keeping the unit clean.

• Netwayaj: Sèvi ak yon twal mou epi sèk pou netwaye deyò aparèy la. Pa sèvi ak pwodui netwayaj likid oswa solvan.
• Vantilasyon: Ensure the unit is placed in an area with adequate airflow to prevent overheating. Do not block ventilation openings.
• Mizajou mikrolojisyèl: Periodically check the Dataprobe websit pou mizajou firmwèr. Mizajou firmwèr yo ka bay nouvo fonksyonalite, amelyorasyon pèfòmans, ak amelyorasyon sekirite. Swiv enstriksyon ki vini ak pake mizajou firmwèr la ak anpil atansyon.

Depanaj

Pwoblèm komen ak solisyon yo

For further assistance, refer to the comprehensive user manual available on the Dataprobe website or contact Dataprobe technical support.

Espesifikasyon

Enfòmasyon sou Garanti

Dataprobe products are manufactured to high quality standards. For detailed warranty information, including terms, conditions, and duration, please refer to the warranty statement provided with your product or visit the official Dataprobe websit la. Kenbe prèv acha ou pou reklamasyon garanti.

Sipò ak Kontakte

For technical support, product inquiries, or additional documentation, please visit the Dataprobe official websit oswa kontakte depatman sèvis kliyan yo.

• Ofisyèl Websit: www.dataaprobe.com
• Resous sipò: Access FAQs, downloads, and detailed user guides.
• Kontakte: Gade nan website for contact numbers and email addresses for technical support.