Cata E 100 GT Bathroom Extractor Fan User Manual

1. Entwodiksyon

The Cata E 100 GT is a silent bathroom extractor fan designed to maintain a fresh and humidity-free environment in your bathroom. Featuring a modern white glass front and a perimeter extraction system, this fan efficiently removes odors and condensation. Its low power consumption and high energy efficiency make it an ideal solution for effective and quiet ventilation in bathrooms and small utility spaces.

Figi 1: Devan view of the Cata E 100 GT extractor fan.

2. Enfòmasyon sou Sekirite

Tanpri li tout enstriksyon sekirite yo ak anpil atansyon anvan enstalasyon ak itilizasyon. Si ou pa swiv enstriksyon sa yo, ou ka pran chòk elektrik, pran dife oswa pran blesi pèsonèl.

• Enstalasyon elektrik: All electrical connections must be performed by a qualified electrician in accordance with local wiring regulations and standards.
• Dekoneksyon pouvwa: Always disconnect the power supply before performing any installation, maintenance, or cleaning tasks.
• Vantilasyon: Ensure adequate ventilation in the room where the fan is installed to prevent backflow of gases from open-flued appliances.
• Timoun ak moun ki vilnerab: Aparèy sa a pa fèt pou itilize pa moun (ki gen ladan timoun) ki gen kapasite fizik, sansoryèl oswa mantal redwi, oswa ki pa gen eksperyans ak konesans, sof si yo te bay sipèvizyon oswa enstriksyon konsènan itilizasyon aparèy la pa yon moun ki responsab sekirite yo. .
• Limit Tanperati: The thermal protector allows operation at ambient temperatures up to 40°C. Do not expose the unit to temperatures exceeding this limit.
• Domaj: Do not operate the fan if the power cord or plug is damaged, or if the unit has been dropped or damaged in any way. Contact qualified service personnel for repair.

3. Pwodwi souview

The Cata E 100 GT extractor fan combines modern design with high performance for optimal bathroom ventilation. Key features include:

• Perimeter Extraction System: Ensures efficient air circulation and removal of humidity and odors.
• White Glass Front: Provides an elegant and modern aesthetic, easy to clean.
• Revèy entegre: Allows programming of operating time from 3 to 15 minutes after activation.
• Pwoteksyon tèmik: Ensures safe operation at ambient temperatures up to 40°C.
• Nivo bri ki ba: Operates at a minimum sound level of 31 dB for quiet performance.
• Segondè Airflow: Maximum airflow of 115 m³/h for rapid and effective ventilation.
• Konsomasyon pouvwa ki ba: Maximum power of 8 W (220-240V 50/60Hz, Class B).

Figi 2: Plis paseview of key features and cleaning process for the E-Glass series.

4. Konpozan enkli

The standard package for the Cata E 100 GT includes the following components:

• Cata E 100 GT Extractor Fan Unit
• Materyèl pou monte (vis, ploge miray)
• Manyèl Enstriksyon
• Timer Module: Electronic timer adjustable between 3 and 15 minutes.
• Note: Other control types (Standard, Hygro, PIR) may be available in different models or configurations. This manual focuses on the TIMER model.

5. Enstalasyon ak Enstalasyon

The Cata E 100 GT extractor fan is designed for wall mounting. Ensure the installation area has a 100 mm diameter opening for the outlet duct.

1. Chwazi Kote: Select a suitable wall location in the bathroom, away from direct water spray, ensuring proper air circulation.
2. Prepare Ouvèti a: Create a circular opening of 100 mm diameter in the wall for the fan's outlet.
3. Dekonekte pouvwa: Before any electrical work, ensure the main power supply to the installation area is switched off at the circuit breaker.
4. Montaj: Secure the fan body to the wall using appropriate screws and wall plugs. Refer to the dimensions diagram for precise measurements.
5. Koneksyon elektrik: Connect the fan to the electrical supply (220-240V 50/60Hz) according to the wiring diagram provided in the full installation guide (not included in this manual, consult a qualified electrician). Ensure proper grounding.
6. Tache panèl devan an: Once the electrical connections are secure and tested, attach the glass front panel.
7. Retabli pouvwa: Chanje sou ekipman pou pouvwa prensipal la.

Figure 3: Dimensions of the Cata E 100 GT extractor fan (in mm).

6. Operasyon Enstriksyon

The Cata E 100 GT with timer functionality operates as follows:

• Aktivasyon: The fan typically activates when the light switch in the bathroom is turned on, or via a separate switch connected to the fan.
• Fonksyon revèy: After the fan is activated and then switched off (e.g., by turning off the light), the integrated electronic timer will keep the fan running for a pre-set duration. This duration can be adjusted between 3 and 15 minutes.
• Ajisteman revèy: To adjust the timer duration, carefully remove the front panel (refer to maintenance section for guidance). Locate the timer adjustment dial or screw on the fan unit. Use a small screwdriver to set the desired run-on time.
• Operasyon kontinyèl: For continuous operation, the fan will run as long as the power supply is active. The timer function only engages after the main power signal is interrupted.

7. Antretyen

Regular cleaning ensures optimal performance and longevity of your Cata E 100 GT extractor fan.

1. Dekonekte pouvwa: Always ensure the power supply to the fan is disconnected at the main circuit breaker before cleaning or performing any maintenance.
2. Remove Front Panel: The glass front panel is designed for easy removal. Gently pull or unclip the front panel as shown in Figure 2 (or similar diagrams in the full manual) to access the fan interior.
3. Clean Front Panel: Wash the glass front panel with mild soap and water. Dry thoroughly with a soft cloth. Avoid abrasive cleaners.
4. Netwaye enteryè fanatik la: Use a soft brush or vacuum cleaner to remove dust and debris from the fan blades and interior housing. Do not use water directly on electrical components.
5. Remonte: Once all parts are clean and dry, carefully reattach the front panel.
6. Retabli pouvwa: Chanje sou ekipman pou pouvwa prensipal la.

NAN. Depanaj

If you encounter issues with your Cata E 100 GT extractor fan, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact a qualified technician or Cata customer support.

9. Espesifikasyon

10. Garanti & Sipò

Garanti: This product is covered by the manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Cata websit la pou plis detay sou tèm ak kondisyon garanti a. Kenbe prèv acha ou pou reklamasyon garanti.

Sipò Kliyan: For technical assistance, spare parts, or any questions regarding the operation or maintenance of your Cata E 100 GT extractor fan, please contact Cata customer support. Contact details can typically be found on the manufacturer's websit oswa nan anbalaj pwodwi a.

Resous sou entènèt: For additional information, FAQs, or updated manuals, please visit the official Cata websit: www.cata.es