Orbegozo FCH 4000 Chocolate Fountain Instruction Manual

1. Enstriksyon Sekirite Enpòtan

Please read all instructions carefully before using the Orbegozo FCH 4000 Chocolate Fountain. Retain this manual for future reference.

• Always store the appliance in a cool, dry place, protected from direct sunlight.
• Ensure the chocolate fountain is placed on a flat, stable, and heat-resistant surface to prevent tipping and ensure proper chocolate flow.
• Pa plonje baz motè a nan dlo oswa nenpòt lòt likid.
• Kenbe lwen timoun ak bèt kay.
• Deploge aparèy la nan priz kouran lè li pa itilize epi anvan w netwaye.
• Pa opere aparèy la ak yon kòd oswa ploge ki domaje, oswa apre aparèy la fonksyone mal oswa li te domaje nan nenpòt fason.
• Sèvi ak sèlman Pwodwi pou Telefòn rekòmande pa manifakti a.

2. Pwodwi souview

The Orbegozo FCH 4000 is a compact chocolate fountain designed for home use, featuring a durable stainless steel construction and a three-tier design for an elegant chocolate flow.

Karakteristik kle:

• Stainless steel body and three-tier fountain structure.
• Integrated keep-warm function to maintain chocolate consistency.
• On/Off switch for easy control.
• Operation indicator light for status indication.
• Anti-slip base for enhanced stability during use.
• Dimansyon kontra enfòmèl ant: 16 x 15.5 x 23 cm.

3. Enstalasyon

Follow these steps to set up your chocolate fountain for first use:

1. Dekonpoze: Ak anpil atansyon retire tout eleman nan anbalaj la.
2. Netwaye: Before first use, wash the stainless steel tiers and auger (spiral rod) with warm, soapy water. Rinse thoroughly and dry completely. The base unit should only be wiped with a damp twal.
3. Rasanble: Place the motor base on a flat, stable, and heat-resistant surface. Insert the auger into the center shaft of the base. Place the three-tier fountain structure onto the base, ensuring it is securely seated and level.
4. Pozisyon: Ensure the fountain is positioned away from drafts or open windows, which can affect chocolate flow.

4. Operasyon Enstriksyon

Operating your Orbegozo FCH 4000 Chocolate Fountain is straightforward:

1. Pre-melt Chocolate: It is essential to melt the chocolate completely before pouring it into the fountain. Use high-quality chocolate specifically designed for fountains, or add a small amount of vegetable oil (approximately 1-2 tablespoons per 450g of chocolate) to regular chocolate to achieve the correct consistency. Melt the chocolate in a microwave or double boiler until smooth and fluid.
2. Limen chalè a: Plug the appliance into a 220V power outlet. Turn the control knob to the "HEAT" position. Allow the base to heat for approximately 5-10 minutes to ensure the chocolate stays warm and fluid.
3. Pour Chocolate: Carefully pour the pre-melted chocolate into the basin at the bottom of the fountain. Do not overfill; the capacity is approximately 1 liter.
4. Kòmanse motè: Once the chocolate is in the basin, turn the control knob to the "HEAT MOTOR" position. The auger will begin to rotate, drawing the chocolate up through the center column and allowing it to cascade down the tiers.
5. Jwi: Dip fruits, marshmallows, cookies, or other treats into the flowing chocolate.
6. Siveye: Periodically check the chocolate level and consistency. If the flow becomes thin or stops, add more pre-melted chocolate.

Videyo Demonstrasyon Pwodwi:

5. Antretyen ak netwayaj

Proper cleaning ensures the longevity and hygiene of your chocolate fountain:

1. Etenn epi deploge: After use, turn the control knob to "OFF" and unplug the appliance from the power outlet.
2. Remove Excess Chocolate: While the chocolate is still warm and liquid, carefully pour any remaining chocolate from the basin into a container for disposal or storage. Do not pour chocolate down the drain.
3. Demonte: Once cooled, remove the tiers and the auger from the base.
4. Konpozan pwòp: Wash the stainless steel tiers and auger immediately with warm, soapy water. It is crucial to clean these parts before the chocolate hardens, as hardened chocolate can be difficult to remove from small holes and crevices. Use a soft brush or sponge to clean thoroughly. Rinse well and dry completely.
5. Baz pwòp: Siye baz motè a ak anonsamp twal. Pa plonje baz la nan dlo.
6. Depo: Ensure all parts are completely dry before reassembling or storing the fountain. Store in a cool, dry place.

NAN. Depanaj

If you encounter issues with your chocolate fountain, refer to these common solutions:

• Chocolate not flowing smoothly:
  • Ensure the fountain is on a perfectly level surface.
  • Check if the chocolate is sufficiently melted and has the correct consistency (add more vegetable oil if too thick).
  • Verify that the "HEAT MOTOR" function is selected.
  • Ensure there is enough chocolate in the basin.
• Motè a pa kòmanse:
  • Tcheke si aparèy la byen branche nan yon priz kouran ki fonksyone.
  • Ensure the control knob is set to "HEAT MOTOR".
• Chocolate hardening in the fountain:
  • Ensure the "HEAT" function is active.
  • The room temperature might be too cold; consider moving the fountain to a warmer area.

7. Espesifikasyon

8. Garanti ak sipò

For warranty information and customer support, please refer to the documentation provided with your purchase or contact Orbegozo customer service directly. Keep your proof of purchase for any warranty claims.

For further assistance, visit the official Orbegozo websit la oubyen kontakte chanèl sèvis kliyan yo.