BONTEC TV Wall Bracket User Manual

1. Entwodiksyon

Thank you for choosing the BONTEC TV Wall Bracket. This full-motion wall mount is designed to securely hold 37-80 inch LED LCD flat and curved screen televisions, offering exceptional flexibility for optimal viewing angles. Manufactured from reinforced, compressed steel, it ensures durability and safety for your television. This manual provides essential information for safe installation, operation, and maintenance of your TV wall bracket.

2. Enfòmasyon sou Sekirite

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in serious personal injury, property damage, or voiding of your warranty.

• Kapasite pwa: Pa depase pwa chaj maksimòm 65 kg (144 lbs).
• Kalite miray: This bracket is designed for installation on wood studs, concrete walls, or brick walls. DO NOT MOUNT ON DRYWALL ALONE without securing to a stud or using appropriate heavy-duty anchors for hollow walls.
• Enstalasyon pwofesyonèl: Si ou pa sèten sou pwosesis enstalasyon an oswa si miray ou a apwopriye, konsilte yon pwofesyonèl ki kalifye.
• Tcheke modèl VESA a: Ensure your TV's VESA pattern is compatible with the bracket before beginning installation.
• Fastener sekirite: Ensure all screws and bolts are securely tightened before mounting the TV. Do not overtighten.
• Jesyon kab: Route cables carefully to prevent pinching or damage when adjusting the TV.

3. Pake kontni

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact BONTEC customer support.

Imaj: Plis paseview of included fitting hardware and TV mounting screws.

• TV Wall Bracket Assembly
• Wall Anchors (M8*90mm Lag Bolts, M10*80mm Concrete Anchors)
• Assembly Hardware (M6*6mm, M6*10mm screws, M8 Washers, M8 Cushioned Nuts, M6 Plastic Washers, M6 Wrench)
• TV Mounting Screws (Various sizes: M4*12mm, M4*30mm, M6*20mm, M6*35mm, M8*20mm, M8*35mm, M8*50mm)
• Spacers (20mm M6/M8, 13mm M4, 5mm M6/M8)
• Washers (M4, M6, M8)
• 1.8m HDMI kab
• Nivo Lespri Bondye
• Enstriksyon ilistre

4. Espesifikasyon

Image: TV size and VESA compatibility overview.

5. Enstalasyon ak Enstalasyon

Follow these steps for a secure and efficient installation. It is recommended to have at least two people for installation, especially when mounting the TV.

5.1. Chèk Pre-Enstalasyon

1. Verifye konpatibilite televizyon an: Check your TV's VESA pattern and weight against the specifications.
2. Idantifye Kalite Mi: Determine if your wall is wood stud, concrete, or brick. Use the appropriate anchors and drilling methods.
3. Locate Studs (for wood walls): Sèvi ak yon detektè poto an bwa pou lokalize sant poto an bwa yo avèk presizyon.
4. Zòn klè: Ensure the installation area is clear of obstructions, electrical wires, and plumbing.

Image: Diverse wall compatibility information.

5.2. Monte Plak Miray la

1. Pozisyone Modèl la: Hold the wall plate or use the provided template against the wall at your desired height. Use the spirit level to ensure it is perfectly horizontal.
2. Make twou perçage: Make pwen perçage yo nan twou yo sou plak miray la.
3. Fè twou: Drill pilot holes according to the marked points and the type of wall. For concrete/brick, use a masonry drill bit and insert concrete anchors. For wood studs, drill pilot holes directly into the center of the studs.
4. Tache plak miray la: Secure the wall plate to the wall using the appropriate lag bolts and washers. Tighten firmly but do not overtighten.

5.3. Mete sipò yo sou televizyon an

1. Lay TV Face Down: Mete televizyon an fas anba ak anpil atansyon sou yon sifas mou epi pwòp pou evite li reyur.
2. Mete sipò televizyon yo: Align the vertical TV brackets with the VESA mounting holes on the back of your TV. Use the correct size screws and spacers from the provided hardware kit. Ensure the brackets are securely fastened.

5.4. Hanging the TV and Final Adjustments

1. Pandye televizyon: With assistance, carefully lift the TV and hook the TV brackets onto the wall plate. Ensure the TV is securely seated on the wall plate.
2. Televizyon an sekirite: Use the safety screws or locking mechanisms on the TV brackets to secure the TV to the wall plate, preventing accidental dislodgement.
3. Ajiste Nivo: Use the ±3° rotation adjustment feature to fine-tune the TV's level if needed.

Image: Easy installation steps.

6. Operasyon ak Ajisteman

The BONTEC TV Wall Bracket offers full motion capabilities for an optimized vieweksperyans nan.

6.1. Ajisteman Pivote

Gently push or pull the TV to swivel it up to 45° left or right. This allows you to direct the screen towards different viewing areas in your room.

Image: Swivel adjustment for optimal viewing.

6.2. Ajisteman Panche

To adjust the vertical tilt, gently push the top or bottom of the TV. The bracket allows for a tilt of +5° up and -15° down, helping to reduce glare and improve viewing konfò.

Image: Tilt and level adjustment features.

6.3. Ekstansyon ak Retrè

The dual arms allow the TV to extend up to 360mm from the wall and retract to a low profile of 60mm, saving space when not in use.

6.4. Jesyon kab

Utilize the integrated cable management system on the bracket arms to neatly route and conceal unsightly cables, maintaining a clean and tidy appearance.

7. Antretyen

Regular maintenance ensures the longevity and safe operation of your TV wall bracket.

• Netwayaj: Wipe the bracket with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish.
• Tèks Peryodik: Periodically check all mounting screws and bolts to ensure they remain tight and secure. Over time, vibrations or adjustments may cause them to loosen slightly.
• Lubrifikasyon: The moving parts are designed for smooth operation and generally do not require lubrication. If movement becomes stiff, consult BONTEC customer support.

NAN. Depanaj

If you encounter any issues with your BONTEC TV Wall Bracket, refer to the following common problems and solutions.

• Televizyon an pa nivo: Use the ±3° rotation adjustment feature to fine-tune the level. Ensure the wall plate was installed horizontally using the spirit level.
• Bracket feels unstable or sags:
  1. Verify that the TV weight does not exceed the 65 kg (144 lbs) maximum capacity.
  2. Ensure all wall mounting bolts and TV attachment screws are securely tightened.
  3. Confirm that the bracket is mounted to appropriate wall studs or solid concrete/brick, not just drywall.
• Difficulty adjusting the TV (swivel/tilt/extension):
  1. Tcheke pou wè si gen nenpòt obstak ki anpeche mouvman.
  2. Ensure no cables are caught in the moving parts.
  3. The joints are designed to be firm to hold the TV's position. Apply gentle, steady pressure.

If the problem persists after attempting these solutions, please contact BONTEC customer support for further assistance.

9. Garanti ak sipò

For information regarding warranty coverage, returns, or technical support, please refer to the documentation provided at the time of purchase or visit the official BONTEC websit la. Kenbe resi acha ou kòm prèv acha.

BONTEC Customer Service: Please refer to the contact information provided on the product packaging or the official BONTEC websit la pou jwenn chanèl sipò ki pi ajou yo.