1. Enstriksyon Sekirite Enpòtan
Tanpri li tout enstriksyon yo ak anpil atansyon anvan ou itilize aparèy la. Si ou pa swiv enstriksyon sa yo, ou ka pran chòk elektrik, pran dife, oswa pran gwo blesi.
- Always operate the fryer on a stable, heat-resistant surface.
- Asire w ke gen ase vantilasyon toutotou aparèy la pandan l ap fonksyone.
- Pa plonje aparèy la, kòd, oswa ploge nan dlo oswa lòt likid.
- Kenbe timoun ak moun ki pa otorize lwen aparèy la pandan l ap fonksyone.
- Use caution when handling hot oil. Always allow oil to cool completely before draining or cleaning.
- Do not overfill the oil tank.
- Dekonekte aparèy la soti nan ekipman pou pouvwa a anvan netwaye oswa antretyen.
- Se sèlman sèvi ak pyès rezèv orijinal ak Pwodwi pou Telefòn.
2. Enstalasyon ak Premye Itilizasyon
2.1 Debake
Carefully remove the fryer and all accessories from the packaging. Retain packaging for future transport or storage.
2.2 Plasman
Place the fryer on a flat, stable, and heat-resistant surface. Ensure there is sufficient space around the appliance for proper ventilation. Do not place near flammable materials.
2.3 Netwayaj Premye
Anvan premye itilizasyon an, netwaye tout pati ki pral an kontak ak manje. Gade seksyon 'Antretyen ak Netwayaj' la pou enstriksyon detaye.
2.4 Koneksyon elektrik
Ensure the power supply matches the specifications of the appliance (400 V, 50 Hz, 8.1 kW). Connect the fryer to a properly grounded electrical outlet.
2.5 Filling with Oil
Fill the oil tank with suitable frying oil up to the indicated maximum fill line. Do not exceed the maximum fill line to prevent overflow during frying.

Image: Bartscher Imbiss PRO Electric Fryer with an empty frying basket, ready for oil filling.
3. Operasyon Enstriksyon
3.1 Limen
Press the green power switch to turn on the appliance. The indicator light will illuminate.

Imaj: Devan view of the Bartscher Imbiss PRO Electric Fryer, highlighting the power switch and temperature control.
3.2 Kontwòl Tanperati
Use the temperature dial to set the desired frying temperature. The temperature range is 50°C to 190°C. The heating element will activate to reach the set temperature.
3.3 Pwosesis fri
- Once the oil reaches the set temperature, carefully place the food into the frying basket.
- Lower the basket slowly into the hot oil.
- Fry for the recommended time, stirring occasionally if necessary.
- Once cooked, lift the basket and allow excess oil to drain before removing the food.

Image: The fryer in operation, with a basket containing french fries submerged in hot oil.
3.4 Etenn
After use, turn the temperature dial to the minimum setting and press the green power switch to turn off the appliance. Disconnect from the power supply.
4. Antretyen ak netwayaj
Regular cleaning and maintenance ensure the longevity and safe operation of your fryer.
4.1 Draining Oil
Always allow the oil to cool completely before draining. Position a suitable container under the drain tap and open the tap to release the oil. Close the tap securely after draining.

Image: The fryer with the oil drain tap extended, ready for oil removal.
4.2 Cleaning the Tank and Heating Element
The thermostat and heating element are removable for easier cleaning. Carefully lift out the heating element assembly. Clean the oil tank and heating element with warm, soapy water and a non-abrasive cloth. Rinse thoroughly and dry completely before reassembly.
4.3 Netwayaj Eksteryè
Siye eksteryè friteuz la ak anonsamp cloth. Do not use harsh chemicals or abrasive cleaners that could damage the stainless steel finish.

Image: The stainless steel lid, which should be cleaned regularly.
NAN. Depanaj
If you encounter issues with your fryer, consult the following table before contacting service personnel.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Fryer does not turn on | No power supply; Power switch off; Thermal cutout activated | Check power connection; Ensure switch is on; Reset thermal cutout (if applicable, consult service manual) |
| Oil not heating | Temperature dial set too low; Heating element fault | Increase temperature setting; Contact qualified technician |
| Twòp lafimen | Oil temperature too high; Old/contaminated oil | Reduce temperature; Replace oil |
6. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Mak | Bartscher |
| Nimewo Modèl | 162500 |
| Koulè | Chrome |
| Dimansyon (L x W x H) | 50 x 41 x 38 cm |
| Volim | 10 Liters (9.7 Lt beaker) |
| Pouvwa | 8.1 KW |
| Voltage | 400 Volts |
| Materyèl | Chrome-nickel steel |
| Otomatik fèmen | Non |
| Pwa atik | 12.7 Kilogram |
| ASIN | B007LSXBZK |
7. Garanti ak sipò
Warranty information for the Bartscher Imbiss PRO Electric Fryer is typically provided with the purchase documentation or can be obtained from the retailer or manufacturer's official website. For technical support or spare parts inquiries, please refer to the contact information provided by Bartscher or your authorized dealer.