Clover D7A Hot and Cold Bottleless Water Dispenser Instruction Manual

Entwodiksyon

The Clover D7A is a bottleless hot and cold water dispenser designed for convenience and efficiency in your home or office. This unit connects directly to your water line, eliminating the need for plastic water bottles. It provides instant access to both refreshingly cold water and piping hot water for various uses.

This manual contains important information regarding the installation, operation, and maintenance of your water dispenser. Please read it thoroughly before use and retain it for future reference.

Enfòmasyon sou Sekirite

• Always ensure the unit is properly grounded before plugging it into an electrical outlet.
• The hot water spigot is equipped with a safety mechanism. To dispense hot water, you must press and hold the safety lock while pressing the spigot. This prevents accidental dispensing of hot water, especially important around children.
• Do not operate the dispenser if the power cord is damaged or if the unit is malfunctioning.
• Kenbe dispansè a lwen limyè solèy dirèk ak sous chalè.
• Asire w ke gen ase vantilasyon toutotou inite a.
• This dispenser is designed for indoor use only.

Pwodwi souview

Imaj sa a montre devan an view of the Clover D7A Hot and Cold Bottleless Water Dispenser in black. It features two spigots, red for hot water and blue for cold water, located above a removable drip tray. The Clover brand logo is visible at the top.

The Clover D7A features durable polypropylene self-closing spigots and hygienic stainless steel hot and cold water tanks. Its design ensures contaminant resistance and efficient cooling and heating.

• Hot Water Spigot: Red lever, with child safety lock.
• Cold Water Spigot: Blue lever.
• Degoute Plato: Detachable pou netwaye fasil.
• Kòd pouvwa: Pou koneksyon elektrik.
• Dlo Inlet: For connection to your water line (POU conversion kit included).

Enstalasyon

1. Debake: Retire dispansè a nan anbalaj li avèk prekosyon. Enspekte li pou wè si li gen nenpòt domaj.
2. Plasman: Place the dispenser on a level surface, away from direct sunlight and at least 4 inches from a wall to allow for proper ventilation.
3. POU Conversion: This unit includes a Point-of-Use (POU) conversion kit to connect to your existing plumbing. Follow the instructions provided with the POU kit for proper installation. Nòt: An inline filter, built-in filtration system, or full install kit are not included with this SKU.
4. Koneksyon dlo: Connect the water line from your plumbing to the dispenser's water inlet using the POU conversion kit. Ensure all connections are secure and leak-free.
5. Koneksyon pouvwa: Plug the power cord into a grounded 110-120 volt, 50-60 Hz electrical outlet.
6. Premye Flite: Before first use, dispense several cups of water from both the hot and cold spigots to flush the system and remove any air.

Enstriksyon Operasyon

Distribisyon dlo frèt

• Place your cup or container under the blue (right) spigot.
• Push the blue lever down or lift it up to dispense cold water.
• Lage levye a pou sispann koule dlo a.

Distribisyon dlo cho

• Place your cup or container under the red (left) spigot.
• To dispense hot water, simultaneously press the safety lock button (usually located on top of the red lever) and push the red lever down or lift it up.
• Release both the safety lock and the lever to stop the water flow.
• Atansyon: Hot water can reach temperatures of 185°F (85°C). Exercise extreme care to avoid burns.

Antretyen

• Netwayaj plato degoute: The one-piece ABS drip tray is easily removed for cleaning. Simply slide it out, empty any collected water, wash with mild soap and water, rinse thoroughly, and snap it back into place.
• Netwayaj eksteryè: Siye deyò dispansè a ak yon twal mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Netwayaj Entèn: For internal cleaning and sanitization, refer to the specific instructions provided with your POU conversion kit or consult a professional.
• Ranplasman filtè: If you have installed an external inline filter (not included), follow the manufacturer's instructions for filter replacement.

Depanaj

• Pa gen distribisyon dlo: Check if the water supply line is properly connected and the water valve is open. Ensure the unit is plugged in and powered on.
• Dlo pa ase cho/frèt: Allow sufficient time for the unit to reach optimal temperatures after initial setup or power cycling. Ensure the hot/cold switches (if present, typically at the back) are turned on.
• Fuite: Check all water line connections for tightness. Ensure the drip tray is correctly seated. If leaking persists, disconnect power and water supply and contact customer support.
• bri ki pa nòmal: Some operational noise from the compressor is normal. If the noise is excessive or unusual, ensure the unit is on a level surface and not touching any walls.

Espesifikasyon

Garanti ak sipò

The Clover D7A Hot and Cold Bottleless Water Dispenser comes with a Garanti manifakti limite pou 1 anTanpri konsève prèv acha ou a pou reklamasyon garanti a.

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Clover customer support. Refer to the contact information provided with your product packaging or visit the official Clover websit pou detay sipò.