Entwodiksyon
This manual provides comprehensive instructions for the Dish Network 3.4 and 4.4 Remote Set. This set includes a 3.4 IR 1 remote with a green color-coded ID pad and a 4.4 IR/UHF 2 remote with a blue color-coded ID pad. These remotes serve as an upgrade and direct replacement for the original remotes used with the Dish Network 322 receiver model.
The remotes are pre-programmed and designed for ease of use, offering both Infrared (IR) and Ultra High Frequency (UHF) capabilities for versatile control of your Dish Network receiver and compatible devices.
Pwodwi souview
Image: The Dish Network 3.4 (left, green ID pad) and 4.4 (right, blue ID pad) remote controls. Both remotes feature a black body with purple and red buttons, including a directional pad, number keys, and various function buttons for TV and receiver control.
The Dish Network 3.4 remote is primarily an Infrared (IR) remote, identified by its green color-coded ID pad. The Dish Network 4.4 remote offers both Infrared (IR) and Ultra High Frequency (UHF) capabilities, distinguished by its blue color-coded ID pad. Both remotes are designed to provide seamless control over your Dish Network 322 receiver.
Enstalasyon
1. Enstalasyon batri
The remotes require batteries for operation. Although batteries are not included with the set, the remotes are designed to use standard Lithium batteries. To install:
- Jwenn kouvèti konpatiman pil la sou dèyè telekòmand lan.
- Leve oswa glise kouvèti a pou ouvri konpatiman an.
- Insert the required batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
- Ranplase kouvèti lòj batri a byen.
2. Initial Programming / Pairing
These remotes are pre-programmed for the Dish Network 322 receiver. For most users, they will work immediately upon battery installation. However, if you experience issues or wish to pair them with a different device or for UHF functionality (4.4 remote only), follow these general steps:
- For IR Control: Ensure a clear line of sight between the remote's IR emitter and the receiver's IR sensor. The 3.4 remote operates solely via IR.
- For UHF Control (4.4 Remote Only): The 4.4 remote supports UHF, allowing control without direct line of sight. Refer to your Dish Network receiver's manual for specific UHF pairing instructions, as this process typically involves a menu option on the receiver itself.
- Programming for TV/VCR: To control your television or VCR, you may need to program the remote using specific codes. Consult the original Dish Network remote programming guide or the Dish Network website for a list of codes and programming steps. The remotes are compatible with VCRs.
Enstriksyon Operasyon
The Dish Network 3.4 and 4.4 remotes feature a standard layout for intuitive control of your receiver and connected devices. Key functions include:
- Bouton pouvwa: Turns the receiver and/or TV on/off.
- Volim monte/desann: Ajiste volim odyo a.
- Chèn monte/desann: Chanje chanèl la.
- Pav Nimerik (0-9): Antre kanal dirèk.
- Gid: Montre gid pwogram lan.
- Select/OK: Konfime seleksyon yo nan meni yo.
- Flèch Navigasyon: Deplase nan meni ak opsyon yo.
- Bèbè: Silans odyo a.
- Rapèl: Retounen nan chanèl anvan an.
- Info: Montre enfòmasyon sou pwogram nan.
- Dosye: Initiates recording (if receiver supports DVR).
- View Televizyon: Switches between TV and other inputs.
- Info Sistèm: Accesses system information.
For detailed functionality of specific buttons, refer to your Dish Network receiver's user manual.
Antretyen
Ranplasman batri
When the remote's performance degrades (e.g., reduced range, unresponsive buttons), it is likely time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section. Always replace all batteries at the same time with new ones of the same type.
Netwayaj
Pou netwaye telekòmand lan, sèvi ak yon twal mou epi sèk. Pou pousyè tè ki difisil pou netwaye, siye l yon ti kras.ampRense twal la avèk dlo oswa yon pwodui netwayaj dou ki pa abrazif. Evite itilize pwodui chimik ki agresif oswa imidite twòp, paske sa yo ka domaje elektwonik oswa fini telekòmand lan.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Telekòmand lan pa reponn. | Batri ki mouri oswa mal enstale. | Ranplase pil yo, asire w ke polarite a kòrèk. |
| Remote has limited range (IR). | Obstruction between remote and receiver; weak batteries. | Ensure clear line of sight. Replace batteries. |
| Remote not controlling TV/VCR. | Remote not programmed for the device. | Program the remote using the appropriate codes for your TV/VCR. Refer to Dish Network's programming guide. |
| 4.4 remote not working via UHF. | Not properly paired with receiver for UHF. | Follow UHF pairing instructions in your Dish Network receiver's manual. |
Espesifikasyon
- Mak: Plat
- Modèl: 3.4 ak 4.4
- Nimewo Pati: 155153-3.4 (for 3.4 remote), 155154-4.4 (for 4.4 remote)
- Aparèy konpatib: Dish Network 322 Receiver, VCR
- Karakteristik espesyal: Infrared (IR), Pre-Programmed, Ultra High Frequency (UHF) for 4.4 remote
- Kalite batri: Lithium (not included)
- Koneksyon Teknoloji: Infrared, UHF (for 4.4 remote)
- Dimansyon pwodwi: Apeprè 19.3 x 7.11 x 5.59 cm
- Pwa atik: Apeprè 91 g
- Koulè: Blue (4.4 remote ID pad), Green (3.4 remote ID pad)
Garanti ak sipò
This product is designed as a direct replacement for Dish Network 322 receiver remotes. For specific warranty information, please refer to the retailer or original manufacturer's documentation provided at the time of purchase.
For technical support, programming assistance, or further inquiries regarding your Dish Network receiver and compatible remotes, it is recommended to contact Dish Network customer service directly or visit their official support website. They can provide the most accurate and up-to-date information for your specific setup.
Note: This manual provides general guidance. Specific features and programming steps may vary based on your Dish Network receiver model and software version.