Electro-Voice EVID 6.2T Surface-Mount Loudspeaker User Manual

Entwodiksyon

The Electro-Voice EVID 6.2T is a high-performance, two-way surface-mount loudspeaker designed for various installation applications. It features dual 6-inch woofers and a 1-inch tweeter, providing clear audio reproduction across a wide frequency range. This model includes 70V/100V transformer taps for flexible integration into commercial audio systems and is housed in a weather-resistant enclosure, making it suitable for both indoor and outdoor use. The speaker also incorporates overload protection for enhanced durability and reliability.

Ki sa ki nan bwat la

• One pair of Electro-Voice EVID 6.2T Loudspeakers

Enstalasyon ak Enstalasyon

Bon enstalasyon enpòtan anpil pou pèfòmans ak sekirite optimal. Li rekòmande pou yon pwofesyonèl kalifye fè enstalasyon an.

Montaj

The EVID 6.2T is designed for surface mounting. Ensure the mounting surface is structurally sound and capable of supporting the speaker's weight (approximately 34.3 pounds per speaker). Use appropriate hardware for secure attachment. The weather-resistant enclosure allows for outdoor installation, but ensure all connections are properly sealed and protected from direct water exposure.

This image displays the front of the Electro-Voice EVID 6.2T speaker. It features two 6-inch woofers positioned vertically, with a horn-loaded tweeter located between them. The speaker enclosure is black and designed for surface mounting.

Fil elektrik

The EVID 6.2T can be connected in either an 8-ohm low impedance configuration or a 70V/100V constant voltage system. Select the appropriate wiring method based on your amplifier and system design.

• 8-Ohm Connection: Connect directly to a low-impedance amplifier output. Ensure the amplifier's impedance rating matches or exceeds the speaker's 8-ohm rating.
• 70V/100V Connection: Utilize the integrated transformer taps. Select the desired wattage tap (e.g., 30W, 60W, 120W) on the speaker to match the power requirements of your constant voltage system. Connect to the 70V or 100V output of your amplifier.

Toujou asire ke amplifier is turned off before making any connections to prevent damage to the equipment.

Enstriksyon Operasyon

Once properly installed and wired, operating the EVID 6.2T speakers is straightforward.

1. Pouvwa sou: Limen odyo ou amplifier.
2. Seleksyon sous: Chwazi sous odyo ou vle a sou ou amplifier oswa mixer.
3. Ajisteman Volim: Piti piti ogmante volim sou ou amplifier to the desired listening level. Avoid setting the volume too high, which can cause distortion and potentially damage the speakers. The EVID 6.2T includes overload protection to help prevent damage from excessive power.
4. Pouvwa Off: When finished, decrease the volume and turn off your amplifier.

Antretyen

Regular maintenance helps ensure the longevity and performance of your speakers.

• Netwayaj: Wipe the speaker enclosure with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but avoid harsh chemicals or abrasive cleaners. Ensure no liquid enters the speaker grilles or ports.
• Enspeksyon koneksyon: Periodically check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to poor sound quality or intermittent operation.
• Konsiderasyon anviwònman an: While weather-resistant, prolonged exposure to extreme conditions (e.g., direct sunlight, heavy rain, snow, extreme temperatures) can affect performance and lifespan. If possible, provide some protection in harsh environments.

Depanaj

If you encounter issues with your EVID 6.2T speakers, refer to the following common troubleshooting steps:

• Pa gen son:
  • Verifye a amplifier limen epi li fonksyone kòrèkteman.
  • Tcheke tout koneksyon kab odyo yo soti nan sous la rive nan aparèy la. amplifier and from the amplifier to the speakers. Ensure they are secure.
  • Confirm the correct input source is selected on your amplifier / mixer.
  • Ensure the volume on the amplifier se vire leve.
• Son defòme:
  • Diminye nivo volim nan sou ou ampSi ou fè twòp son nan oratè yo, sa ka lakòz distòsyon.
  • Tcheke pou koneksyon fil elektrik ki lach.
  • Asire w la amplifier's output power and impedance match the speaker's requirements (8-ohm or correct 70V/100V tap).
• Son tanzantan:
  • Inspect all cable connections for looseness or damage.
  • Tcheke pou nenpòt kous sikwi nan fil elektrik oratè a.

If these steps do not resolve the issue, contact Electro-Voice customer support for further assistance.

Espesifikasyon

Garanti ak sipò

For detailed warranty information, technical support, or service inquiries regarding your Electro-Voice EVID 6.2T loudspeakers, please refer to the official Electro-Voice websit la oubyen kontakte depatman sèvis kliyan yo dirèkteman. Kenbe resi acha w la kòm prèv acha pou reklamasyon garanti.