Rowenta FS3010E0 Iron User Manual

1. Enstriksyon Sekirite Enpòtan

Please read all instructions carefully before using the Rowenta FS3010E0 iron and retain them for future reference. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always ensure the iron is unplugged from the electrical outlet before cleaning, filling, or when not in use.
• Pa kite fè a san siveyans pandan l limen oswa konekte nan kouran an.
• Keep the iron and its power cord out of reach of children and individuals with reduced physical, sensory, or mental capabilities.
• Pa plonje fè a nan dlo oswa nenpòt lòt likid.
• Avoid touching the hot soleplate. Always use the handle.
• Place the iron on a stable, heat-resistant surface when resting or during use.
• Do not operate the iron if the power cord or plug is damaged, or if the iron has been dropped or damaged in any way. Contact authorized service personnel for repair.
• Pou itilize andedan kay la sèlman.
• Pa sèvi ak fè a pou lòt rezon pase sa li te prevwa pou li a.

2. Pwodwi souview

Familiarize yourself with the components of your Rowenta FS3010E0 iron:

• Dial Kontwòl Tanperati: Used to select the appropriate temperature for different fabric types.
• Limyè Endikatè: Illuminates when the iron is heating and turns off when the selected temperature is reached.
• Semèl: The aluminum heating surface that comes into contact with fabrics.
• Manch: For gripping and maneuvering the iron.
• Kòd pouvwa: Konekte fè a nan priz elektrik la.

This image displays the top of the Rowenta FS3010E0 iron, highlighting the circular temperature control dial with settings ranging from minimum to maximum, and specific fabric types like synthetics, cotton, and linen. The power cord exits from the rear of the handle.

This image features a graphic representation of the iron's soleplate, emphasizing its aluminum construction. The text 'ALUMINUM SOLEPLATE' and 'PIASTRA IN ALLUMINIO' are displayed.

3. Enstalasyon

1. Debake: Carefully unpack the iron and remove all packaging materials, labels, and protective films. Retain packaging for potential future transport or storage.
2. Preparasyon pou Premye Itilizasyon: Before using the iron for the first time, wipe the soleplate with a soft, damp twal pou retire nenpòt rès fabrikasyon. Seche byen.
3. Koneksyon pouvwa: Ensure your electrical outlet matches the voltage and frequency specified on the iron (230V, 50Hz). Plug the iron into a suitable, grounded electrical outlet.
4. Pozisyon: Mete fè a sou yon planch oswa yon sifas ki estab epi ki reziste chalè.

4. Operasyon Enstriksyon

4.1 Preparing Garments

Sort clothes by fabric type (e.g., synthetics, silk, wool, cotton, linen). Always check the garment's care label for recommended ironing temperatures. It is advisable to iron fabrics requiring lower temperatures first.

4.2 Mete tanperati a

1. Branche fè a nan yon priz elektrik ki apwopriye.
2. Turn the temperature control dial to the desired setting according to the fabric type. The dial has markings for different materials (e.g., Min, Synthetics, Cotton, Linen, Max).
3. The indicator light will illuminate, signaling that the iron is heating up.

Yon detaye view of the iron's temperature control dial, labeled 'Min' to 'Max' with various heat levels indicated by dots. The text 'THERMOSTAT' and 'TERMOSTATO' are visible below the dial.

4.3 Ironing

1. Once the indicator light turns off, the iron has reached the selected temperature and is ready for use.
2. Begin ironing, moving the iron smoothly over the fabric.
3. If the indicator light comes on again during ironing, it means the iron is reheating to maintain the set temperature.

Yon fèmen view of the iron's handle area, showing a small red indicator light. The text 'INDICATOR LIGHT' and 'SPIA LUMINOSA' are present, pointing to the light's function.

4.4 After Ironing

• Turn the temperature control dial to the "Min" position.
• Deploge fè a soti nan priz elektrik la.
• Kite fè a refwadi nèt anvan ou sere l.

5. Antretyen

5.1 Netwaye sèl la

• Asire w ke fè a debranche epi li refwadi nèt anvan ou netwaye li.
• Siye plato a ak anonsamp twal ak yon pwodui netwayaj ki pa abrazif si sa nesesè.
• Do not use metallic scouring pads, abrasive cleaners, or harsh chemicals, as these can damage the soleplate.

5.2 Netwaye Eksteryè a

• Siye deyò fè a ak yon twal mou.amp twal.
• Pa sèvi ak pwodui netwayaj abrazif oswa solvang.

5.3 Depo

• Store the iron upright on its heel rest, with the cord neatly wrapped, once it has completely cooled down.
• Sere nan yon kote ki sèk e ki an sekirite.

NAN. Depanaj

6.1 Iron Not Heating

• Check if the iron is properly plugged into a working electrical outlet.
• Ensure the temperature control dial is not set to the "Min" or "Off" position.
• Inspect the power cord for any visible damage. If damaged, do not use the iron.

6.2 Indicator Light Not Illuminating

• If the iron is heating but the light is off, it may have already reached the set temperature. The light cycles on and off to maintain temperature.
• If the light never illuminates and the iron does not heat, refer to "Iron Not Heating" above.

6.3 Iron Sticking to Fabric

• The temperature setting might be too high for the specific fabric. Reduce the temperature according to the garment's care label.
• The soleplate might be dirty. Clean the soleplate as described in the Maintenance section.

7. Espesifikasyon

8. Garanti ak sipò

This Rowenta FS3010E0 iron is covered by a manufacturer's warranty, subject to the terms and conditions valid in your country of purchase. Please refer to the warranty card included with your product or visit the official Rowenta websit pou enfòmasyon detaye.

For technical assistance, spare parts, or any questions regarding your product, please contact Rowenta customer service. Contact details can typically be found on the official Rowenta websit la oubyen nan dokimantasyon ki vini ak aparèy ou an.