MEAN WELL HLG-240H-24B

Manyèl Enstriksyon

MEAN WELL HLG-240H-24B Switching LED Power Supply

Modèl: HLG-240H-24B

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of the MEAN WELL HLG-240H-24B Switching LED Power Supply. This unit is designed to provide a stable 24V output with a current range of 0-10A, delivering up to 240W of power. It is suitable for various LED lighting applications and other industrial uses requiring a reliable power source.

2. Enfòmasyon sou Sekirite

Tanpri li tout avètisman ak enstriksyon sekirite yo ak anpil atansyon anvan ou enstale oswa itilize aparèy sa a. Si ou pa swiv enstriksyon sa yo, sa ka lakòz chòk elektrik, dife oswa blesi grav.

  • Danje elektrik: Enstalasyon ak fil elektrik yo dwe fèt pa yon elektrisyen kalifye, dapre tout kòd elektrik lokal ak nasyonal yo.
  • Dekoneksyon pouvwa: Always disconnect power at the circuit breaker before performing any installation, wiring, or maintenance.
  • Bon baz: Asire w ke ekipman pou pouvwa a byen konekte ak tè a pou anpeche chòk elektrik.
  • Vantilasyon: Do not obstruct ventilation openings. Adequate airflow is essential for proper operation and to prevent overheating.
  • Kondisyon anviwònman: This unit is rated IP67, suitable for dry, damp, and wet locations. However, avoid submerging the unit or exposing it to extreme temperatures outside its specified operating range.
  • Konpatibilite chaj: Ensure the connected load does not exceed the power supply's maximum output capacity (240W, 10A).

3. Pwodwi souview

The HLG-240H-24B is a high-performance switching power supply designed for reliability and efficiency. It features a robust aluminum casing and sealed design for environmental protection.

Top view of the Mean Well HLG-240H-24B power supply with wiring labels visible.

Figi 3.1: Top view of the HLG-240H-24B power supply, showing input and output wiring, model number, and various certifications. The input wires (brown, blue, green/yellow) and output wires (black, red, white) are clearly visible.

Angle view of the Mean Well HLG-240H-24B power supply, showing the side with mounting tabs.

Figi 3.2: Angle view of the power supply, highlighting the robust aluminum casing and the integrated mounting tabs on one end for secure installation.

Side view of the Mean Well HLG-240H-24B power supply, showing the sealed cable entries.

Figi 3.3: Side view of the power supply, illustrating the sealed cable entries for both input and output wiring, contributing to its IP67 rating.

Anba view of the Mean Well HLG-240H-24B power supply, showing the heat sink fins.

Figi 3.4: Anba view of the power supply, revealing the ribbed surface designed for efficient heat dissipation, ensuring stable operation.

4. Enstalasyon ak Enstalasyon

Swiv etap sa yo pou enstalasyon an sekirite ak apwopriye:

  1. Montaj: Select a suitable mounting location that allows for adequate ventilation and is protected from physical damage. Use the integrated mounting tabs to secure the unit firmly to a stable surface. Ensure the power supply is mounted horizontally or vertically with proper airflow.
  2. Fil elektrik pou antre (AC):
    • Konekte a Brown wire to the AC Line (L).
    • Konekte a Ble wire to the AC Neutral (N).
    • Konekte a Vèt/Jòn wire to Earth Ground (⏚).

    Note: Ensure all connections are secure and insulated. Refer to local electrical codes for proper wiring practices.

  3. Fil elektrik sòti (DC):
    • Konekte a Wouj wire to the DC Positive (+V).
    • Konekte a Nwa wire to the DC Negative (-V).
    • La Blan wire is for dimming control (DIM+).
    • La Ble wire is for dimming control (DIM-).

    Note: Verify polarity before connecting to your LED load or other DC devices. Incorrect polarity can damage the power supply or the connected device.

  4. Dimming Function (Optional): If using the dimming function, connect the DIM+ and DIM- wires to a compatible 0-10V dimmer or PWM signal source. Refer to the dimmer's instructions for specific wiring.
  5. Pouvwa sou: After all connections are verified and secure, restore power to the circuit. The power supply should begin operating.

5. Operasyon Enstriksyon

Once installed, the HLG-240H-24B operates automatically. It provides a constant voltage output of 24V. The current output will vary depending on the connected load, up to a maximum of 10A.

  • Sòti Voltage: The unit provides a regulated 24V DC output.
  • Sòti aktyèl: The current delivered will be determined by the load, up to 10A. Do not exceed this limit.
  • Kontwòl gradyasyon: If connected to a compatible dimmer, the brightness of the connected LEDs can be adjusted via the 0-10V or PWM signal.
  • Karakteristik pwoteksyon: The power supply includes built-in protections against short circuit, over current, over voltage, and over temperature. In case of a fault, the unit may shut down automatically to protect itself and the connected load.

6. Antretyen

The HLG-240H-24B power supply is designed for long-term, maintenance-free operation. However, periodic checks can help ensure optimal performance and longevity.

  • Netwayaj: Ensure the power supply's surface is kept clean and free of dust or debris, especially around the heat dissipation fins. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
  • Vantilasyon: Periodically check that the area around the power supply remains clear and that airflow is not obstructed.
  • Koneksyon: Occasionally inspect wiring connections for any signs of loosening, corrosion, or damage. Ensure all connections remain secure.
  • Tcheke anviwònman an: Verifye ke anviwònman operasyon an rete nan limit tanperati ak imidite espesifye yo.

Atansyon: Do not attempt to open or repair the power supply. There are no user-serviceable parts inside. Opening the unit will void the warranty and may expose you to dangerous voltages.

NAN. Depanaj

If you experience issues with your HLG-240H-24B power supply, refer to the following common problems and solutions:

PwoblèmKòz posibSolisyon
Pa gen pwodiksyon voltage / Aparèy la pa limen
  • Pa gen kouran AC
  • Fil elektrik ki pa kòrèk
  • Surcharge oswa pwoteksyon kout sikwi aktive
  • Fòt entèn
  • Tcheke disjonktè a ak sous kouran an.
  • Verify input and output wiring connections.
  • Disconnect load, check for short circuits in wiring or load. Reduce load if overloaded. Cycle power.
  • If problem persists after checking above, unit may be faulty.
Sòti voltage is low or unstable
  • Kondisyon Surcharge
  • Koneksyon pòv yo
  • Surchof
  • Diminye chaj konekte a.
  • Tcheke tout koneksyon fil elektrik yo pou wè si yo sere epi si gen korozyon.
  • Ensure adequate ventilation and ambient temperature is within limits.
Fonksyon gradyasyon pa travay
  • Incorrect dimming wiring
  • Dimmer enkonpatib
  • Dimmer faulty
  • Verify DIM+ and DIM- connections.
  • Ensure dimmer is compatible with 0-10V or PWM input.
  • Test dimmer with another compatible device if possible.

If troubleshooting steps do not resolve the issue, contact a qualified technician or the manufacturer for assistance. Do not attempt to repair the unit yourself.

8. Espesifikasyon

ParamètValè
Nimewo ModèlHLG-240H-24B
Antre Voltage Range100-240VAC (4.0A), 277VAC (1.5A for North America only)
Sòti Voltage24V DC
Sòti aktyèl Gamme0-10A
Rated pouvwa240W
Efikasite(Typically >90%)
Fonksyon gradyasyon0-10V / PWM / Resistance
Evalyasyon IPIP67 (Suitable for dry, damp, and wet locations)
Tanperati Fonksyònman-40°C to +80°C (Refer to derating curve in full datasheet)
Dimansyon (L x W x H)9.45 x 2.76 x 1.57 pous (240 x 70 x 40 mm)
Pwa2.5 liv (1.13 kg)
SètifikasyonUL, CUL, CE, SELV, IP67
Peyi orijinLachin

9. Garanti ak sipò

This MEAN WELL product is manufactured to high quality standards. Specific warranty terms and conditions are typically provided with your purchase documentation or can be found on the official MEAN WELL website. For technical support, product inquiries, or warranty claims, please contact your authorized MEAN WELL distributor or visit the official MEAN WELL websit pou enfòmasyon kontak.

Pou plis enfòmasyon, tanpri vizite: www.meanwell.com

© 2025 MEAN WELL. Tout dwa rezève.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.