Manyèl Itilizatè Chofaj Idwonik KING HT612 Kickspace

1. Entwodiksyon

This manual provides essential information for the safe and efficient operation of your KING HT612 4/5-AS/FS-GW Hydronic Kickspace Heater. Please read all instructions carefully before installation and use. Retain this manual for future reference.

The KING HT612 is designed to provide supplemental heat in areas where space is limited, such as under cabinets, in toe-kick spaces, or within stair risers. It utilizes a hydronic system, drawing heat from a hot water source.

2. Enfòmasyon enpòtan sou sekirite

AVÈTISMAN: Enstalasyon, ajisteman, chanjman, sèvis oswa antretyen move ka lakòz domaj nan pwopriyete, blesi oswa lanmò. Li enstriksyon enstalasyon, opere ak antretyen yo byen anvan ou enstale oswa fè sèvis pou ekipman sa a.

• Toujou dekonekte kouran an anvan ou fè antretyen oswa netwaye aparèy la.
• Asire inite a byen chita.
• Pa bloke ouvèti pou antre lè a oswa ouvèti pou sòti lè a.
• Aparèy sa a pa fèt pou itilize pa moun (ki gen ladan timoun) ki gen kapasite fizik, sansoryèl oswa mantal redwi, oswa ki pa gen eksperyans ak konesans, sof si yo te ba yo sipèvizyon oswa enstriksyon konsènan itilizasyon aparèy la pa yon moun ki responsab sekirite yo.
• Timoun yo ta dwe sipèvize pou asire ke yo pa jwe ak aparèy la.
• Installation must be performed by a qualified technician in accordance with all local codes and ordinances.
• Pa sèvi ak aparèy chofaj la si nenpòt pati te plonje nan dlo.

3. Konpozan ak Karakteristik Pwodwi

The KING HT612 Hydronic Kickspace Heater features a compact design for discreet installation. Key components and features include:

• Squirrel Cage Blower: Efficiently moves air across the hot water coil.
• Motè de vitès: Allows for adjustment of air output (Hi/Lo settings).
• Copper Tubes with Aluminum Fins: Optimized for fast coil heating and efficient heat transfer.
• Powder-Coated White Grille: Dirab ak estetikman bèlasing fini.
• Aqua Stat & Fan Switch: Integrated controls for temperature and fan speed.

4. Enstalasyon ak Enstalasyon

The HT612 is designed to fit between 16-inch on-center studs and features a top-mounted water feed for flexible placement. Professional installation is highly recommended.

4.1 Lis Enstriksyon Pre-Enstalasyon an

• Verify that the hot water supply lines are accessible and compatible.
• Ensure adequate electrical supply (0.51 Amps, 120V) is available at the installation site.
• Confirm sufficient clearance for air circulation around the unit.
• Gather necessary tools: screwdriver, wire strippers, pipe wrench, level, measuring tape.

4.2 Enstriksyon pou monte

1. Select a suitable location, typically under a cabinet or in a toe-kick space, ensuring it is level and secure.
2. Create an opening in the cabinet or wall that matches the dimensions of the heater (refer to specifications for exact measurements).
3. Secure the heater firmly into the opening using appropriate fasteners.

4.3 Koneksyon plonbri

1. Connect the 5/8-inch OD copper tubes of the heater to your hot water supply and return lines.
2. Ensure all connections are watertight and free of leaks.
3. Bleed air from the hydronic system after connections are made and water supply is restored.

4.4 Koneksyon elektrik

1. Connect the heater to a dedicated electrical circuit, following all local electrical codes.
2. Asire bon baz pou anpeche chòk elektrik.
3. Verify all wiring connections are secure before restoring power.

5. Operasyon Enstriksyon

The KING HT612 features a simple two-speed fan control and an integrated aquastat for automatic operation.

5.1 Premye demaraj

1. After installation and verification of all connections, restore power to the unit.
2. Ensure the hot water supply to the unit is active.

5.2 Kontwòl vitès fanatik

The unit is equipped with a rocker switch on the front grille for fan speed control:

• "HI" Setting: Provides maximum air output (up to 120 CFM) for faster heating.
• "LO" Setting: Provides reduced air output (down to 50 CFM) for quieter operation and maintaining warmth.
• "OFF" Setting: Turns the fan off. The aquastat will still monitor water temperature.

5.3 Aquastat Operation

The integrated aquastat automatically activates the fan when the water temperature in the coil reaches a preset level, ensuring that only warm air is circulated. The fan will turn off when the water temperature drops below the set point.

6. Antretyen

Regular maintenance ensures optimal performance and longevity of your KING HT612 heater. Always disconnect power before performing any maintenance.

6.1 Cleaning the Grille and Fan

• Siye griyaj ekstèn lan detanzantan avèk yon twal mou,amp twal pou retire pousyè ak debri.
• For deeper cleaning, the grille can be carefully removed. Use a vacuum cleaner with a brush attachment to gently clean the fan blades and coil fins.
• Pa sèvi ak pwodui netwayaj abrazif oswa solvang.

6.2 Antretyen Motè

The motor is permanently lubricated and generally requires no maintenance. In case of issues, the motor is designed for easy removal by a qualified technician for service or replacement.

6.3 Verifikasyon Sistèm

• Annually inspect plumbing connections for any signs of leaks.
• Asire w ke ouvèti lè yo klè epi pa gen obstak.

NAN. Depanaj

Anvan ou kontakte sèvis kliyan, tanpri gade gid depanaj sa a:

8. Espesifikasyon

9. Garanti ak sipò

9.1 Enfòmasyon sou Garanti

The KING HT612 Hydronic Kickspace Heater comes with a 1 ane garanti apati dat acha a. Garanti sa a kouvri domaj nan materyèl ak nan fabrikasyon anba itilizasyon nòmal. Li pa kouvri domaj ki soti nan move enstalasyon, move itilizasyon, abi, aksidan oswa reparasyon san otorizasyon.

For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact KING customer service.

9.2 Sipò pou Kliyan

If you have any questions regarding the installation, operation, or maintenance of your KING HT612 heater, or if you require technical assistance, please contact KING customer support. For more information, you may also visit the official KING store on Amazon: Visit the KING Store.