Sharp SPC800

Sharp SPC800 Quartz Analog Twin Bell Alarm Clock

Manyèl Enstriksyon

Pwodwi souview

The Sharp SPC800 is a classic quartz analog twin bell alarm clock designed for reliable timekeeping and a powerful alarm. Its traditional design features a clear dial and durable metal construction, making it a functional addition to any bedroom.

  • Quartz analog twin bell alarm Clock
  • Button for backlight
  • Luminous glow in the dark hands
  • Lumineux rele
Devan view of the Sharp SPC800 Quartz Analog Twin Bell Alarm Clock in silver.

Imaj: Devan view of the Sharp SPC800 Quartz Analog Twin Bell Alarm Clock, showcasing its silver finish and classic twin bell design.

Diagram showing key features of the Sharp SPC800 alarm clock: easy to read dial, loud twin bell alarm, touch activated backlight, and 1x AA battery operation.

Image: A diagram highlighting the main features of the alarm clock, including its easy-to-read dial, loud twin bell alarm, touch-activated backlight, and requirement for one AA battery.

Enstalasyon

1. Enstalasyon batri

The Sharp SPC800 alarm clock requires one (1) AA battery (not included) for operation. Ensure the battery is inserted with the correct polarity (+/-) as indicated in the battery compartment.

  1. Jwenn lòj batri a sou do revèy la.
  2. Louvri kouvèti lòj batri a.
  3. Insert one (1) AA battery, matching the positive (+) and negative (-) terminals with the markings inside the compartment.
  4. Fèmen kouvèti lòj batri a byen.

2. Anviwònman Tan Inisyal

After installing the battery, set the current time.

  1. Jwenn bouton "TIME SET" la sou dèyè revèy la.
  2. Rotate the "TIME SET" knob clockwise or counter-clockwise until the hour and minute hands display the correct current time.
Retounen view of the Sharp SPC800 alarm clock showing the time set knob, alarm set knob, and alarm on/off switch.

Imaj: Dèyè view of the alarm clock, illustrating the location of the time setting knob, alarm setting knob, and the alarm on/off switch.

Enstriksyon Operasyon

1. Setting the Alarm Time

To set the desired alarm time:

  1. Jwenn bouton "ALARM SET" la sou dèyè revèy la.
  2. Rotate the "ALARM SET" knob until the small red alarm hand on the clock face points to your desired alarm time.
  3. For precise setting, it is recommended to advance the main time hands past the desired alarm time to ensure the alarm hand is correctly positioned for AM/PM if applicable (though this is an analog clock, so it's a 12-hour cycle).

2. Aktive/Dezaktive Alam lan

The alarm is activated and deactivated using the ON/OFF switch located on the back of the clock.

  • To activate the alarm, slide the switch to the "ON" position.
  • Pou dezaktive alam lan, glise switch la nan pozisyon "OFF" la.
  • The twin bell alarm is designed to be loud and will continue ringing until manually turned off. This model does not feature a snooze function.

3. Sèvi ak ekleraj dèyè a

Pou viewing the time in low light conditions:

  • Press and hold the "LIGHT" button located on the back of the clock.
  • The clock face will illuminate. Release the button to turn off the backlight.
  • Note: The hour and minute hands, as well as the hour markers, have a luminous glow-in-the-dark feature for passive visibility in the dark.

Antretyen

1. Ranplasman batri

To ensure optimal performance, it is recommended to replace the AA battery approximately every six months, or when the clock's accuracy diminishes or the backlight becomes dim.

  1. Swiv etap enstalasyon batri yo ki dekri nan seksyon "Enstalasyon" an.
  2. Jete ansyen pil yo yon fason responsab selon règleman lokal yo.

2. Netwayaj

Pou netwaye revèy la, siye sifas la dousman avèk yon twal mou epi sèk. Evite itilize pwodui netwayaj abrazif oswa solvan, paske sa yo ka domaje fini an.

Depanaj

PwoblèmKòz posib / Solisyon
Clock not keeping accurate time or stops working.Battery is low or depleted. Replace with a fresh AA battery. Ensure battery is inserted with correct polarity.
Alam lan pa sonnen.Ensure the alarm ON/OFF switch on the back is in the "ON" position. Check battery level and replace if necessary. Verify the alarm hand is correctly set.
Backlight is dim or not working.Battery is low. Replace with a fresh AA battery.
Audible ticking sound.This is normal for a quartz analog movement and not an indication of a defect. The sound may be more noticeable in quiet environments.
Alarm rings slightly before or after the set time.Due to the analog nature, minor variations in alarm activation time (a few minutes) can occur. This is typical for this type of mechanism.

Espesifikasyon

Diagram showing the dimensions of the Sharp SPC800 alarm clock: 4.6 inches wide, 6.5 inches high, and 2.2 inches deep.

Image: A visual representation of the alarm clock's dimensions, indicating a width of 4.6 inches, a height of 6.5 inches, and a depth of 2.2 inches.

  • Mak: Sharp
  • Nimewo Modèl: SPC800
  • Koulè: Ajan
  • Kalite ekspozisyon: Analòg
  • Sous pouvwa: Mache ak pil (1 pil AA obligatwa, pa enkli)
  • Dimansyon pwodwi: 2.45" lajè x 6.9" wotè
  • Pwa atik: 0.83 liv (13.3 ons)
  • Materyèl: Metal
  • Kalite mouvman: Quartz
  • Fòm revèy: Twin Bell
  • Kalite montaj: Tabletop
  • Manifakti: MZ Berger
  • UPC: 049353711119

Garanti ak sipò

This Sharp SPC800 Quartz Analog Twin Bell Alarm Clock comes with a Garanti limite. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or contact Sharp customer support.

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please visit the official Sharp websit entènèt la oubyen kontakte depatman sèvis kliyan yo. Anjeneral, ou ka jwenn enfòmasyon pou kontakte yo sou anbalaj pwodwi a oubyen sou fich manifakti a. websit.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.