Manyèl Itilizatè Pwojektè DLP Pòtab InFocus IN112 la

1. Entwodiksyon

This manual provides essential information for the safe and efficient operation of your InFocus IN112 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

The InFocus IN112 is designed for versatile use, offering high brightness and a strong contrast ratio. It incorporates BrilliantColor technology for clear image reproduction and is 3D-ready. Its compact and lightweight design facilitates easy portability and installation.

2. Ki sa ki nan bwat la

Verifye ke tout atik ki nan lis anba a yo enkli nan anbalaj pwodwi ou a:

• Pwojektè InFocus IN112
• Kòd pouvwa
• RGB cable (VGA cable)
• A/V cable (Composite Video cable)
• Enstriksyon sekirite
• Manyèl itilizatè (dokiman sa a)
• Remote kontwòl

3. Pwojektè souview

Figi 1: Top View - Displays the control panel with buttons for power, source selection, menu navigation, and keystone adjustment, along with the focus ring for the lens.

Figi 2: Side View - Shows the ventilation grilles essential for heat dissipation during operation. Ensure these are not obstructed.

Figi 3: Angle View ak Remote - Illustrates the projector from an angle, highlighting the lens and the included remote control for convenient operation.

Figi 4: Dèyè View - Details the various input and output ports, including power, audio in/out, video, computer (VGA), RS232, and Mini USB.

4. Enstalasyon

4.1 Plasman

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. The distance from the screen will determine the image size. Adjust the projector's position to achieve the desired image size and clarity.

4.2 Koneksyon pouvwa

1. Konekte kòd kouran ki vini ak aparèy la nan priz kouran pwojektè a.
2. Ploge lòt pwent fil kouran an nan yon priz elektrik ki chita.

4.3 Konekte Sous Antre yo

The IN112 projector offers multiple input options:

• VGA (Computer In 1 & 2): Use the RGB cable to connect to a computer's VGA output.
• Videyo konpoze: Use the A/V cable to connect to devices with composite video output.
• S-Videyo: Connect to devices with S-Video output.
• Odyo nan: Konekte sous odyo ekstèn yo avèk yon kab stereo 3.5mm.
• RS232C: For control and automation systems.
• USB B Mini: For control and firmware updates.

Asire w tout kab yo byen konekte anvan ou limen pwojektè a.

5. Operasyon Enstriksyon

5.1 Power On/Off

• Pou pouvwa sou, peze la Pouvwa button on the control panel or remote control. The power indicator light will illuminate.
• Pou koupe pouvwa, peze la Pouvwa button again. Confirm shutdown if prompted. Allow the projector to cool down before unplugging.

5.2 Ajisteman Imaj

• Konsantre: Vire bag konsantre a sou lantiy pwojektè a jiskaske imaj la vin byen file epi klè.
• Keystone: Sèvi ak la Keystone buttons on the control panel or remote to correct trapezoidal image distortion if the projector is not perfectly perpendicular to the screen.

5.3 Seleksyon Sous

Peze a Sous button on the control panel or remote control to cycle through available input sources (VGA1, VGA2, Video, S-Video).

5.4 Navigasyon meni

Peze a Meni/Sòti button to access the on-screen display (OSD) menu. Use the arrow buttons to navigate and the Chwazi or Antre button to confirm selections. Press Meni/Sòti ankò pou fèmen meni an.

5.5 mòd ekolojik

Aktive Mòd Eko a pou pwolonje lamp life and reduce power consumption. This mode is suitable for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode compared to 5,000 hours in normal mode.

5.6 3D Content Projection

The IN112 is 3D-ready. To project 3D content, you will need compatible 3D source material, a 3D-capable player, and active 3D glasses (sold separately). Refer to your 3D source device's manual for specific setup instructions.

6. Antretyen

6.1 Lamp Ranplasman

Pwojektè a lamp gen yon dire lavi fini. Lè l laamp Endikatè (Temp/Lamp) illuminates or the image brightness significantly decreases, the lamp may need replacement. The lamp door is conveniently located on the top of the projector for easy access, even when installed.

Atansyon: Ensure the projector is powered off and completely cooled before attempting lamp replacement. Refer to the detailed lamp replacement instructions in the full service manual for safety and proper procedure.

6.2 Netwayaj

The IN112 projector is designed without filters, eliminating the need for filter cleaning or replacement. Periodically wipe the exterior casing with a soft, dry cloth. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.

NAN. Depanaj

8. Espesifikasyon

9. Garanti ak sipò

9.1 Pwodwi Garanti

The InFocus IN112 projector is backed by a comprehensive warranty:

• 5-ane garanti limite sou pwojektè a.
• 2-ane garanti konplè kouvri pyès ak travay.
• 6-mwa garanti sou lamp.

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official InFocus warranty documentation or visit the InFocus websit.

9.2 Sipò teknik

For technical assistance, troubleshooting, or service inquiries, please contact InFocus customer support. Contact information can typically be found on the InFocus official websit la oubyen nan dokimantasyon ki enkli a.

10. Related Product Information (IN130 Series)

The following video provides an overview of features found in the InFocus IN130 Series projectors. While specific models may vary, many core functionalities and design principles are shared across InFocus projector lines, offering general insight into InFocus projector capabilities.