Progress Lighting 2-Light Flush Mount Ceiling Light Fixture User Manual

1. Entwodiksyon

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Progress Lighting 2-Light Flush Mount Ceiling Light Fixture, Model P3925-09. This fixture is designed to provide ambient illumination in various interior spaces such as kitchens, hallways, bedrooms, and living rooms. Please read all instructions carefully before beginning installation.

Figure 1: Progress Lighting 2-Light Flush Mount Ceiling Light Fixture (Model P3925-09)

2. Enfòmasyon enpòtan sou sekirite

Pou diminye risk dife, chòk elektrik, oswa aksidan pèsonèl, toujou swiv prekosyon sekirite debaz sa yo:

• AVÈTISMAN: Turn off electrical power at the circuit breaker or fuse box before installing or servicing the fixture.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring installations.
• Aparèy sa a fèt pou itilizasyon andedan kay la sèlman.
• Do not install this fixture in wet locations. It is cCSAus damp-location listed, suitable for damp environments like bathrooms or covered porches, but not direct water exposure.
• Always use bulbs of the correct wattage and type as specified in the product specifications.
• Manyen konpozan an vè yo avèk prekosyon pou evite yo kraze.
• Pwopozisyon 65 Avètisman: Pwodui sa a ka gen ladan pwodwi chimik yo konnen nan Eta Kalifòni pou lakòz kansè ak domaj nesans oswa lòt domaj repwodiksyon.

3. Pake kontni

Verify that all components listed below are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.

Figure 2: Diagram of fixture components and assembly steps.

Eleman ki enkli:

• Mounting strap for outlet box
• Mounting hardware (screws, wire nuts)
• Fixture body with pre-wired electrical leads
• Alabaster glass dome shade
• Decorative finial
• Fèy enstriksyon enstalasyon

Remak: Anpoul yo pa enkli epi yo dwe achte separeman.

4. Enstriksyon Enstalasyon

Follow these steps to install your ceiling light fixture. It is recommended to have a second person assist during installation to ensure safety and ease of handling.

1. Etenn pouvwa: Before starting, ensure the electrical power to the junction box is turned off at the main circuit breaker or fuse box.
2. Prepare Montaj la: Attach the mounting strap to the outlet box using the provided screws. Ensure the mounting strap is securely fastened.
3. Koneksyon fil elektrik: Carefully connect the fixture's electrical wires to the corresponding house wires using the provided wire nuts.
   • Connect the black wire from the fixture to the black (hot) wire from the outlet box.
   • Connect the white wire from the fixture to the white (neutral) wire from the outlet box.
   • Connect the copper ground wire from the fixture to the green or bare copper ground wire from the outlet box.
   Asire w ke tout koneksyon an sekirite.
4. Kò enstalasyon montaj: Carefully tuck the wires into the outlet box. Align the fixture body with the mounting strap and secure it using the provided screws.
5. Enstale anpoul: Screw two 75-watt maximum, medium base (E26) bulbs or LED equivalents (sold separately) into the sockets.
6. Tache lonbraj an vè a: Place the alabaster glass dome shade onto the fixture body. Secure it with the decorative finial by screwing it onto the threaded rod at the bottom of the fixture. Do not overtighten.
7. Retabli pouvwa: Once installation is complete, turn the electrical power back on at the circuit breaker or fuse box.

Figure 3: Detailed installation sheet for Model P3925-09.

5. Operating Your Light Fixture

This fixture operates like a standard ceiling light. Once installed and power is restored, it can be controlled via a wall switch (not included).

• On/Off: Use the connected wall switch to turn the light fixture on or off.
• Dimming: If using dimmable bulbs and a compatible dimmer switch (both sold separately), you can adjust the light intensity to create your desired ambiance.

6. Antretyen

Antretyen regilye ap ede prezève aparans ak fonksyonalite aparèy ekleraj ou a.

• Netwayaj: To clean the fixture, turn off the power and allow it to cool. Wipe the metal parts with a soft, dry cloth. Clean the glass shade with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or pads, as they may damage the finish.
• Ranplasman anpoul:
  1. Etenn kouran aparèy la nan disjonktè a.
  2. Carefully unscrew the decorative finial at the bottom of the glass shade.
  3. Remove the glass shade.
  4. Unscrew the old bulbs and replace them with new 75-watt maximum, medium base (E26) bulbs or LED equivalents.
  5. Reattach the glass shade and secure it with the decorative finial.
  6. Retabli pouvwa nan aparèy la.

NAN. Depanaj

If your fixture is not operating correctly, refer to the following table for common issues and solutions:

8. Spécifications pwodwi

Figure 4: Dimensional drawing of the fixture, showing 13-1/4" diameter and 5-7/8" height.

Figi 5: Close-up view of the brushed nickel finial at the base of the glass shade.

Figi 6: Close-up view of the brushed nickel rim of the fixture.

9. Enfòmasyon sou Garanti

This Progress Lighting fixture is backed by a 1-ane garanti limite. This warranty covers defects in materials and workmanship under normal use and service. For specific terms and conditions, please refer to the warranty documentation included with your product or contact Progress Lighting customer support.

10. Sipò pou Kliyan

For further assistance, technical support, or to inquire about replacement parts, please visit the official Progress Lighting store or contact their customer service department.

Progress Lighting Store: Vizite Magazen an