BUFFALO Giga Switching Hub 24-Port LSW3-GT-24NSR User Manual

1. Entwodiksyon

The BUFFALO Giga Switching Hub LSW3-GT-24NSR is a 24-port Gigabit Ethernet switch designed for high-speed network environments. It is ideal for small to medium-sized offices and workplaces requiring robust and reliable network connectivity. This device supports full Gigabit speeds across all ports, ensuring efficient data transfer.

Key features include a fanless design for silent operation and enhanced reliability, as well as a loop detection function to prevent network disruptions caused by accidental network loops.

2. Enfòmasyon sou Sekirite

Please read and understand the following safety precautions before using the device to prevent injury or damage.

• Pwovizyon pou pouvwa: Sèvi ak adaptè kouran ki vini ak li a sèlman. Asire w ke priz kouran an satisfè vòltaj espesifye a.tage kondisyon.
• Vantilasyon: Pa bloke ouvèti vantilasyon yo. Asire w ke gen ase sikilasyon lè toutotou aparèy la pou anpeche li chofe twòp.
• Anviwònman: Avoid exposing the device to water, high humidity, extreme temperatures, or direct sunlight.
• Manyen: Do not drop or subject the device to strong impacts. Do not attempt to open or repair the device yourself. Refer all servicing to qualified personnel.
• Câbles: Ensure all network cables are properly connected and secured.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

• BUFFALO Giga Switching Hub LSW3-GT-24NSR Unit
• Pouvwa kab
• Rack Mount Brackets (if included with your model)
• Pye kawoutchou (pou plasman sou biwo)

4. Enstalasyon

4.1 Enstalasyon Fizik

The LSW3-GT-24NSR can be installed on a desktop or mounted in a 19-inch equipment rack.

Plasman Desktop:

1. Attach the included rubber feet to the bottom of the unit to prevent slipping and provide stability.
2. Mete aparèy la sou yon sifas plat, ki estab e ki gen ase vantilasyon.

Montaj etajè:

1. Attach the rack mount brackets to the sides of the unit using the provided screws.
2. Secure the unit into a standard 19-inch equipment rack using appropriate rack screws (not included).

4.2 Konekte kab rezo yo

Connect your network devices (computers, servers, other switches) to any of the 24 RJ-45 ports on the front panel using standard Ethernet cables (Category 5e or higher recommended for Gigabit speeds).

Figi 1: Panèl Devan anlèview with 24 Ethernet Ports and Status LEDs.

4.3 Konekte pouvwa

1. Connect the power cable to the AC IN port on the rear of the device.
2. Ploge lòt bout kab pouvwa a nan yon priz kouran apwopriye.
3. The device will power on automatically. The POWER LED on the front panel should illuminate.

Figi 2: Panèl dèyè aview with AC IN Power Port.

5. Operasyon Enstriksyon

5.1 Endikatè ki ap dirije

The front panel features several LED indicators to monitor the status of the switch and its ports.

Figi 3: Detaye view of LED Indicators and Loop Detection Switch.

5.2 Loop Detection Function

The LSW3-GT-24NSR features a hardware switch for enabling or disabling the loop detection function. This function helps prevent network instability caused by accidental network loops.

Figure 4: Loop Detection Switch (ON/OFF).

• SOU: Loop detection is active. If a loop is detected, the corresponding port will be automatically shut down to prevent network broadcast storms, and the LOOP DETECT LED will illuminate.
• OFF: Loop detection is disabled.

It is recommended to keep the loop detection function ON for network stability.

6. Antretyen

6.1 Netwaye Aparèy la

Pou kenbe pèfòmans optimal, netwaye deyò switch la detanzantan.

• Disconnect the power cable before cleaning.
• Sèvi ak yon twal mou, sèk pou siye sifas la.
• Do not use liquid cleaners, aerosols, or solvents, as these may damage the casing oswa konpozan entèn yo.

6.2 Konsiderasyon Anviwònman

Ensure the device is operated within its specified environmental conditions:

• Tanperati: 0°C a 40°C (32°F a 104°F)
• Imidite: 10% a 85% (ki pa kondanse)

NAN. Depanaj

If you encounter issues with your BUFFALO Giga Switching Hub, refer to the following common problems and solutions.

7.1 Pa gen pouvwa

• sentòm: POWER LED la etenn.
• Solisyon: Check if the power cable is securely connected to both the device and the power outlet. Ensure the power outlet is functional.

7.2 No Link or Slow Speed on a Port

• sentòm: The LINK/ACT LED for a connected port is off, or the 1000/100/10M LED indicates a lower speed than expected (e.g., 100M instead of 1000M).
• Solisyon:
  • Verifye ke kab Ethernet la byen konekte nan tou de bout yo.
  • Try a different Ethernet cable. Ensure it is a Category 5e or higher cable for Gigabit speeds.
  • Konekte aparèy la nan yon lòt pò sou switch la.
  • Check the network adapter settings on the connected device (computer, server) to ensure it is configured for auto-negotiation or the correct speed.

7.3 Network Instability / LOOP DETECT LED is On

• sentòm: The LOOP DETECT LED is illuminated, and network performance is degraded or unstable.
• Solisyon:
  • A network loop has been detected. This typically occurs when two ports on the same switch (or different switches) are connected to each other, creating an infinite data path.
  • Carefully inspect your network cabling to identify and remove any redundant connections that form a loop.
  • If the loop detection switch is ON, the affected port will be automatically shut down. Once the loop is resolved, the port should resume normal operation.

8. Espesifikasyon

9. Garanti ak sipò

This BUFFALO product is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official BUFFALO websit la pou wè tèm ak kondisyon garanti detaye yo.

For technical support, product registration, or further assistance, please visit the official BUFFALO support websit entènèt la oubyen kontakte depatman sèvis kliyan yo. Anjeneral, ou ka jwenn enfòmasyon pou kontakte yo sou sit fabrikan an. websit oswa nan anbalaj pwodwi a.