Beyerdynamic DT-108-200-400-BLACK

1. Entwodiksyon

The Beyerdynamic DT 108 is a professional single-ear headset designed for demanding audio environments such as news gathering, film, TV production, and live events. Its robust construction ensures durability, while the comfortable design allows for extended wear. This manual provides essential information for the proper setup, operation, and maintenance of your DT 108 headset.

Image: The Beyerdynamic DT-108-200-400-BLACK single-ear headset, showing the headphone cup, headband, and hypercardioid microphone arm.

2. Karakteristik kle

• Closed, Dynamic Single-Ear Headphone: Provides excellent sound isolation while allowing one ear to monitor ambient sound.
• 400 Ohms Impedance: Optimized for professional audio equipment.
• Dynamic, Hypercardioid Microphone: Designed for clear voice transmission with excellent off-axis rejection, minimizing background noise.
• High SPL Capability: Microphone is capable of handling very high sound pressure levels without distortion.
• Konfò eksepsyonèl: Features a soft headband and ear pads for long-term wear comfort.
• Rugged and Durable Construction: Built to withstand the rigors of professional use.

3. Enstalasyon

The DT 108 headset requires a connecting cable (sold separately) to operate. Ensure you have the correct cable for your specific application (e.g., XLR for microphone, 1/4-inch or 3.5mm for headphone).

1. Konekte kab la: Attach the appropriate connecting cable to the headset's connector. Ensure a secure connection.
2. Identify Audio Ports: Locate the microphone input and headphone output ports on your audio mixer, intercom system, or recording device. Microphone inputs are typically XLR, and headphone outputs are usually 1/4-inch (6.35mm) or 3.5mm jacks.
3. Ploge nan: Connect the microphone end of the cable to the microphone input and the headphone end to the headphone output.
4. Pouvwa sou: Turn on your audio equipment.

4. Operasyon Enstriksyon

1. Mete Headset la: Place the single ear cup over one ear, ensuring a comfortable and secure fit. The headband should rest comfortably over your head. The open side allows for monitoring of ambient sound.
2. Ajiste mikwofòn la: Position the microphone arm so that the microphone is approximately 1-2 inches (2.5-5 cm) from the corner of your mouth. This optimal distance helps capture clear audio and minimizes breath noises.
3. Siveyans odyo: Adjust the headphone volume on your connected audio device to a comfortable listening level. The DT 108 is designed to provide clear audio monitoring.
4. Speaking into the Microphone: Speak clearly and directly into the microphone. The hypercardioid pattern is designed to pick up sound primarily from the front, reducing unwanted background noise.

5. Antretyen ak Swen

• Netwayaj: Sèvi ak yon twal mou epi sèk pou siye kas ekoutè a. Pou kousen zòrèy yo, yon ti kras mouye.amp cloth with mild soap can be used, but ensure they are completely dry before use. Do not use harsh chemicals or abrasive cleaners.
• Depo: Sere kas ekoutè a nan yon kote pwòp epi sèk, lwen tanperati ekstrèm ak limyè solèy dirèk. Evite mele kab la.
• Swen kab: Handle the connecting cable with care. Avoid sharp bends or excessive pulling, which can damage the internal wiring.
• Ranplasman kousinen zòrèy: Ear pads are replaceable. If they become worn or damaged, contact Beyerdynamic support or an authorized dealer for replacement parts.

NAN. Depanaj

• No Sound from Headphone:
  • Check if the headphone cable is securely connected to both the headset and the audio output.
  • Verify the volume level on your audio device.
  • Ensure the audio source is active and sending a signal.
  • Test with another audio source or device if possible.
• Mikwofòn pa travay:
  • Check if the microphone cable is securely connected to both the headset and the microphone input.
  • Ensure the microphone input on your audio device is enabled and its gain/level is appropriately set.
  • Confirm that phantom power is not accidentally engaged if your device provides it, as this dynamic microphone does not require it and it could potentially cause issues.
  • Test with another microphone input or device if possible.
• Odyo defòme:
  • Reduce the input gain on your audio device if the sound is distorted from the microphone.
  • Lower the output volume if the headphone audio is distorted.
  • Tcheke pou kab domaje oswa konektè.

7. Espesifikasyon

8. Garanti ak sipò

Beyerdynamic products are manufactured to high quality standards and come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Beyerdynamic websit.

For technical support, spare parts, or service inquiries, please contact Beyerdynamic customer service or visit their official support page. You can find more information and contact details on the Beyerdynamic Store on Amazon oswa mondyal yo websit.