Progress Lighting P5821-20 1-Light Compact Fluorescent Wall Lantern

1. Pwodwi souview

The Progress Lighting P5821-20 is a 1-light energy-efficient compact fluorescent wall lantern designed for outdoor use. It features a transitional styling with an antique bronze finish and a matte white acrylic diffuser. This fixture is rated for use in wet locations and complies with California Title-24 requirements, making it suitable for porches, patios, and other exterior wall applications.

This image shows the Progress Lighting P5821-20 1-Light Energy Efficient Compact Fluorescent Wall Lantern in an antique bronze finish, featuring a classic design with a matte white acrylic diffuser.

2. Enfòmasyon sou Sekirite

• AVÈTISMAN: Dekonekte kouran an nan disjonktè a oswa bwat fizib la anvan enstalasyon oswa antretyen.
• Tout koneksyon elektrik yo dwe fèt an akò ak kòd lokal yo, òdonans yo, oswa Kòd Elektrik Nasyonal la (NEC). Konsilte yon elektrisyen kalifye si ou pa abitye ak koneksyon fil elektrik ki kòrèk yo.
• This product may be subject to California Proposition 65 rules and regulations. For more information, visit www.P65Warnings.ca.gov.
• Do not install this fixture in areas where it may be submerged in water. While rated for wet locations, it is not designed for submersion.

3. Pake kontni

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• 1-Light Wall Lantern (P5821-20)
• Matte White Acrylic Diffuser
• Lojman aliminyòm rezistan
• Mounting Hardware (typically includes mounting strap, screws, wire nuts)
• Nòt: A compact fluorescent light source (bulb) is pa enkli epi yo dwe achte separeman.

4. Enstalasyon ak Enstalasyon

Zouti obligatwa: Tournevis, pens pou retire fil elektrik, tep elektrik, linèt sekirite.

1. Etenn pouvwa: Before starting, ensure the power to the installation area is completely off at the circuit breaker or fuse box.
2. Prepare fil elektrik yo: Carefully remove the existing fixture (if any) and expose the electrical wires from the junction box.
3. Attach Mounting Strap: Secure the provided mounting strap to the junction box using the screws.
4. Fè koneksyon elektrik: Connect the fixture's wires to the house wires according to local electrical codes. Typically, connect black to black (live), white to white (neutral), and bare copper or green to bare copper or green (ground). Secure connections with wire nuts and electrical tape.
5. Mount Fixture: Carefully tuck the wires into the junction box and align the fixture with the mounting strap. Secure the fixture to the mounting strap using the provided screws.
6. Enstale sous limyè a: Insert a compatible compact fluorescent bulb (not included) into the fixture's socket. Refer to the specifications for the correct wattage.
7. Retabli pouvwa: Yon fwa enstalasyon an fini epi tout koneksyon yo byen fèm, retabli kouran an nan disjonktè a.

Enpòtan: Si ou pa sèten sou nenpòt pati nan pwosesis enstalasyon an, konsilte yon elektrisyen kalifye.

5. Operasyon Enstriksyon

This wall lantern operates via a standard wall switch connected to its electrical circuit. Once installed and powered, simply toggle the wall switch to turn the light on or off.

• Kalite sous limyè: Kontra enfòmèl ant Fluoresan
• Maksimòm Wattage: 13 Watts

6. Antretyen

• Netwayaj: Pou netwaye aparèy la, asire w ou pa gen kouran. Siye l avèk yon twal mou.amp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or acrylic diffuser.
• Ranplasman anpoul: Ensure power is off before replacing the bulb. Allow the old bulb to cool completely before removal. Replace with a new compact fluorescent bulb of the same type and wattage (13 Watts maximum).
• Enspeksyon: Enspekte aparèy la detanzantan pou wè si li gen nenpòt siy itilizasyon, domaj, oswa koneksyon ki lach. Rezoud nenpòt pwoblèm san pèdi tan.

NAN. Depanaj

If the wall lantern does not operate correctly, perform the following checks:

• Pa gen limyè:
  • Asire w ke switch miray la nan pozisyon 'ON'.
  • Check the circuit breaker or fuse for the fixture's circuit. Reset if tripped or replace fuse if blown.
  • Verify the light bulb is securely screwed in and is not burnt out. Replace if necessary.
  • Confirm that all electrical connections are secure and properly wired. (AVÈTISMAN: Turn off power before checking wiring.)
• Limyè tranbleman:
  • Check for a loose bulb or loose wiring connections.
  • Ensure the bulb is the correct type and wattage pou aparèy la.

If issues persist after performing these checks, consult a qualified electrician.

8. Espesifikasyon

This image illustrates the dimensions of the P5821-20 wall lantern, measuring 8.75 inches in height, 7.25 inches in length, and 5.75 inches in width.

9. Garanti ak sipò

Pwodui Progress Lighting sa a kouvri pa yon 1-ane garanti from the date of purchase. For detailed warranty information, please refer to the official warranty document provided by Progress Lighting, which can typically be found on their website or via the link: https://hubbellcdn.com/warranty/prog_93049973_d_warranty.pdf.

For technical support, replacement parts, or further assistance, please contact Progress Lighting directly. Contact information can usually be found on the manufacturer's websit la oubyen sou anbalaj pwodwi a.