Amerec K60 Digital Control and Steamhead User Manual

1. Entwodiksyon

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Amerec K60 Digital Control and Steamhead. The K60 is a 3-button digital control designed for Amerec steam bath systems, featuring on/off functionality, temperature adjustment, and time duration settings. It includes a remote-mounted temperature sensor, allowing flexible installation either inside or outside the steam room. The display conveniently alternates between the ambient room temperature and the remaining steam time.

2. Enfòmasyon sou Sekirite

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in injury or damage to the product. This device is intended for use with Amerec steam generators only. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.

• Danje elektrik: Dekonekte kouran an nan disjonktè a anvan ou enstale oswa fè antretyen.
• Danje boule: The steamhead can become very hot during operation. Do not touch the steamhead while the steam generator is active.
• Dega dlo: Asire w ke tout koneksyon yo pa kite dlo pase pou anpeche flit.
• Vantilasyon: Ensure proper ventilation in the steam room as per local building codes.

3. Pake kontni

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• K60 Digital Control Panel
• Capteur Tanperati Remote
• Kab kontwòl
• Comfort Flo Steamhead (Oil Rubbed Bronze)
• Gid enstalasyon (dokiman sa a)

4. Enstalasyon ak Enstalasyon

The Amerec K60 control kit includes the K60 control, a remote sensor, necessary cables, and the Comfort Flo steam head. The control can be mounted either inside or outside the steam room.

4.1. Enstalasyon Panèl Kontwòl la

Choose a suitable location for the K60 control panel. It should be easily accessible and visible. If mounting inside the steam room, ensure it is not directly in the path of the steam flow. The control panel requires a standard electrical gang box for installation.

1. Turn off power to the steam generator at the main circuit breaker.
2. Install a standard electrical gang box at the desired control location.
3. Route the control cable from the steam generator to the gang box.
4. Connect the control cable to the K60 control panel terminals as per the wiring diagram provided with your steam generator.
5. Secure the K60 control panel into the gang box.

4.2. Installing the Remote Temperature Sensor

The remote sensor is crucial for accurate temperature readings. Mount it approximately 6 inches below the ceiling, away from the steamhead and any direct drafts.

1. Select a location for the sensor, ensuring it is not directly above the steamhead.
2. Route the sensor cable from the steam generator to the chosen sensor location.
3. Connect the sensor cable to the remote temperature sensor.
4. Mount the sensor securely to the wall.

4.3. Installing the Comfort Flo Steamhead

The Comfort Flo steamhead should be installed approximately 6-12 inches above the finished floor, away from the seating area and any direct contact points.

1. Ensure the steam line from the generator is properly plumbed to the desired steamhead location.
2. Apply thread sealant to the steamhead threads.
3. Thread the Comfort Flo steamhead into the steam line fitting.
4. Sere byen sere, men pa twò sere.

Figi 1: Amerec K60-ORB Digital Control and Comfort Flo Steamhead. This image shows the K60 digital control panel and the matching oil rubbed bronze Comfort Flo steamhead, which are key components of the steam bath system.

5. Operasyon Enstriksyon

The K60 control features three buttons for easy operation: On/Off, Temperature, and Time Duration.

5.1. Limen/Etenyen

• Peze a ON/OFF button once to start the steam generator. The display will illuminate and show the current room temperature.
• Peze a ON/OFF button again to turn off the steam generator.

5.2. Mete Tanperati

• While the steam generator is on, press the TANPERATI button. The display will show the current set temperature.
• Sèvi ak la TANPERATI button to cycle through available temperature settings. The generator will adjust to maintain the selected temperature.

5.3. Setting Time Duration

• While the steam generator is on, press the TAN button. The display will show the current set duration.
• Sèvi ak la TAN button to cycle through available time durations. The steam generator will automatically shut off after the set time expires.
• The display alternates between ambient room temperature and time remaining during operation.

6. Antretyen

Regular maintenance ensures optimal performance and longevity of your Amerec K60 Digital Control and Steamhead.

• Netwaye panèl kontwòl la: Siye panèl kontwòl la ak yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Cleaning the Steamhead: Periodically check the steamhead for mineral buildup. If necessary, gently clean the opening with a soft brush. For stubborn deposits, consult your steam generator's manual for descaling procedures.
• Enspeksyon kab: Periodically inspect all cables for signs of wear or damage. If any damage is found, contact a qualified technician for replacement.

NAN. Depanaj

If you encounter issues with your K60 control, refer to the following common problems and solutions:

For issues not listed here, or if solutions do not resolve the problem, please contact Amerec customer support.

8. Espesifikasyon

9. Garanti ak sipò

Deskripsyon garanti: Amerec provides a warranty of five years for parts and two years for labor on the K60 Digital Control and Steamhead.

For technical support, warranty claims, or to purchase replacement parts, please contact Amerec customer service. Refer to the contact information provided with your original steam generator documentation or visit the official Amerec websit.