1. Enfòmasyon enpòtan sou sekirite
Toujou obsève prekosyon sekirite debaz yo lè w ap itilize zouti elektrik pou diminye risk dife, chòk elektrik, ak aksidan pèsonèl. Li tout enstriksyon yo ak anpil atansyon anvan ou itilize pwodui sa a.
- Sekirite Zòn Travay: Kenbe zòn travay ou pwòp epi byen limen. Zòn ki dezòdone oswa ki fè nwa yo ka lakòz aksidan. Pa sèvi ak zouti elektrik nan atmosfè eksplozif, tankou lè gen likid, gaz oswa pousyè ki ka pran dife.
- Sekirite elektrik: Avoid body contact with earthed or grounded surfaces. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
- Sekirite Pèsonèl: Rete vijilan, gade sa w ap fè, epi sèvi ak bon sans lè w ap opere yon zouti elektrik. Pa sèvi ak yon zouti elektrik pandan w fatige oswa anba enfliyans dwòg, alkòl, oswa medikaman.
- Itilizasyon zouti ak swen: Do not force the power tool. Use the correct power tool for your application. Do not use the power tool if the switch does not turn it on and off. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.
- Sekirite batri: Pa boule aparèy la menm si li domaje anpil. Batri yo ka eksploze nan yon dife.
2. Pwodwi souview
The BLACK+DECKER PD400LG Pivot-Driver is a 3.6-volt cordless screwdriver designed for various light-duty fastening tasks. Its unique pivoting handle allows access to tight spaces.
Eleman ki enkli:
- PD400LG Screwdriver
- Double-Ended Screwdriving Bit
- Charger
Karakteristik kle:
- 2-Position Twist Handle: Allows the tool to be used in an inline or pistol grip configuration for versatility in various applications and tight spaces.
- Integrated LED Light Ring: Illuminates the work area for improved visibility, especially in dark or confined spaces.
- Konsepsyon kontra enfòmèl ant ak lejè: Amelyore konfò itilizatè a epi diminye fatig pandan itilizasyon pwolonje.
- Chanjman pou pi devan/pou dèyè: Pou vise ak retire vis.
Figure 1: The BLACK+DECKER PD400LG Pivot-Driver in use, demonstrating its compact design and ability to access tight areas on a metal shelf.
3. Enstalasyon
3.1 Chaje batri a
- Ensure the tool is switched off before charging.
- Konekte chargeur a nan yon priz elektrik estanda.
- Insert the charger plug into the charging port on the screwdriver.
- Allow the tool to charge for the recommended duration (refer to charger instructions for specific times). The battery is a 3.6V Lithium Ion type.
- Dekonekte plato a yon fwa chaje fini.
Note: For optimal battery life, it is recommended to fully charge the tool before first use.
3.2 Installing the Screwdriving Bit
- Ensure the tool is in the locked (center) position to prevent accidental startup.
- Insert the desired double-ended screwdriving bit firmly into the hex chuck at the front of the tool.
- Pull on the bit to ensure it is securely seated.
4. Operasyon Enstriksyon
4.1 Adjusting the Handle Position
The PD400LG features a 2-position twist handle. To adjust, firmly grasp the handle and twist the front section relative to the rear section until it locks into either the inline or pistol grip position. This allows for greater flexibility when working in confined spaces.
4.2 Driving and Removing Screws
- Select the appropriate bit for your screw.
- Position the bit onto the screw head.
- To drive screws, slide the forward/reverse switch to the forward (clockwise) position.
- To remove screws, slide the forward/reverse switch to the reverse (counter-clockwise) position.
- Press the trigger to activate the screwdriver. The LED light ring will illuminate the work area.
- Lage deklanche a pou sispann zouti a.
Caution: Do not over-tighten screws. The tool provides 40 inch-pounds of torque.
4.3 Using the LED Light Ring
The integrated LED light ring automatically activates when the trigger is pressed, providing illumination to the work surface. This feature is particularly useful when working in dimly lit environments.
5. Antretyen
5.1 Netwayaj
- Keep the ventilation slots clear to prevent overheating.
- Sèvi ak yon mou, damp twal pou netwaye deyò zouti a. Pa sèvi ak pwodui chimik ki agresif oswa pwodui netwayaj abrazif.
- Never immerse the tool in water or any other liquid.
5.2 Depo
Store the tool in a dry, secure location out of reach of children. For prolonged storage, ensure the battery is partially charged to maintain its health.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Zouti pa kòmanse | Batri egzeyate Forward/Reverse switch is in the locked (center) position | Chaje batri a Move the switch to forward or reverse position |
| Rediksyon nan puisans oswa kout tan fonksyònman | Batri pa konplètman chaje Batri prèske nan fen lavi | Asire w ke batri a konplètman chaje Consider replacing the tool if battery performance significantly degrades over time (battery is not user-replaceable) |
| Ti moso a glise nan tèt vis la | Gwosè ti jan ki pa kòrèk Bit la pa byen mete Worn bit | Use the correct size bit Ensure bit is fully seated in the chuck Replace worn bits |
7. Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Nimewo Modèl | PD400LG |
| Voltage | 3.6 Volts |
| Kalite batri | Lityòm Ion |
| Vitès | 180 RPM |
| Koupl | 40 Pous Liv |
| Sous pouvwa | Batri Powered |
| Materyèl | Lojman plastik |
| Itilizasyon Rekòmande | Electronics Assembly, Furniture Assembly, Minor Home Repairs |
8. Garanti ak sipò
8.1 Garanti manifakti a
This BLACK+DECKER PD400LG Pivot-Driver is covered by a Limited Two Years manufacturer's warranty. This warranty covers defects in material or workmanship. Please retain your proof of purchase for warranty claims.
8.2 Sipò pou Kliyan
For technical assistance, service, or warranty inquiries, please contact BLACK+DECKER customer support. Refer to the contact information provided in your product packaging or visit the official BLACK+DECKER website for current support options.