Progress Lighting P8057-36 4-Inch Recessed Eyeball Pinhole Trim User Manual

Entwodiksyon

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P8057-36 4-Inch Recessed Eyeball Pinhole Trim. Please read this manual thoroughly before beginning installation and retain it for future reference.

The P8057-36 is an eyeball trim designed for use with Progress Lighting 4-inch recessed lighting housings. It features a 360-degree rotation and a 30-degree tilt capability, allowing for adjustable light direction.

Enstriksyon Sekirite Enpòtan

AVÈTISMAN: Risk pou chòk elektrik. Dekonekte kouran an nan bwat fizib la oswa nan disjonktè a anvan enstalasyon oswa antretyen.

• Tout koneksyon elektrik yo dwe fèt an akò ak kòd lokal yo, òdonans yo, oswa Kòd Elektrik Nasyonal la (NEC).
• Konsilte yon elektrisyen kalifye si ou pa sèten sou pwosesis enstalasyon an.
• Ensure the trim is compatible with your existing recessed housing. This trim is designed for 4-inch recessed housings.
• Pa depase wat maksimòm lantage espesifye pou lamp. This trim is for use with 50-watt 12V MR-16 lamps.
• Handle the trim and lamp with care to avoid damage.

Kontni pake

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• 1 x P8057-36 Recessed Eyeball Pinhole Trim (Chestnut finish)
• Gid enstalasyon (dokiman sa a)

Note: Recessed housing and lamp (50-watt 12V MR-16) are sold separately.

Enstalasyon ak Enstalasyon

This trim is designed for easy installation into compatible 4-inch recessed lighting housings. Ensure power is OFF before proceeding.

1. Prepare Lojman an: Ensure the recessed housing is properly installed and wired according to local electrical codes. The housing should be a 4-inch model compatible with 12V MR-16 lamps.
2. Enstale Lamp: Carefully insert a 50-watt 12V MR-16 lamp nan lamp holder within the recessed housing. Ensure it is seated securely. (Lamp pa enkli)
3. Mete taye a: Align the P8057-36 eyeball trim with the opening of the recessed housing. Gently push the trim upwards until the retention clips (if present on your housing) engage and hold the trim firmly in place.
4. Fikse taye a: Ensure the trim is flush with the ceiling surface. Adjust as necessary.
5. Retabli pouvwa: Once the trim is securely installed, restore power at the circuit breaker.

Image: The P8057-36 Recessed Eyeball Pinhole Trim in Chestnut finish. This image shows the front view of the trim, highlighting its adjustable eyeball design.

Operasyon

The P8057-36 trim allows for directional lighting adjustment.

• Ajiste direksyon limyè: Gently grasp the outer ring of the eyeball and rotate it 360 degrees to direct light horizontally.
• Tilting the Eyeball: The eyeball can be tilted up to 30 degrees to aim light vertically. Carefully push or pull the eyeball to achieve the desired angle.

Note: Avoid excessive force when adjusting the eyeball to prevent damage to the mechanism.

Antretyen

• Netwayaj: Disconnect power before cleaning. Wipe the trim with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Lamp Ranplasman: Disconnect power before replacing the lamp. Pèmèt lamp to cool completely. Carefully remove the old MR-16 lamp and insert a new 50-watt 12V MR-16 lamp. Ensure the new lamp is securely seated before restoring power.

Depanaj

Espesifikasyon

Garanti ak sipò

Garanti manifakti: This Progress Lighting product is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or further assistance, please contact Progress Lighting customer service. Refer to the official Progress Lighting websit la pou jwenn enfòmasyon kontak ki pi resan yo.

Ou ka vizite a Magazen Pwogrè Ekleraj sou Amazon pou plis enfòmasyon sou pwodwi yo.