Manyèl Itilizatè Ti Chofdlo Enstantane CLAGE M3/SMB

1. Enstriksyon Sekirite Enpòtan

Please read these instructions carefully before installation and use. Failure to follow these instructions may result in property damage, personal injury, or death.

• This appliance must be installed by a qualified electrician and plumber in accordance with all local and national regulations.
• Ensure the electrical supply matches the specifications of the appliance (230 V, 3.5 kW).
• Do not operate the appliance if it is damaged or not functioning correctly.
• Do not block the water outlet or tamper ak valv soulajman presyon an.
• This unit is designed for pressureless operation. Only use the special mixer tap supplied with the unit.
• Kenbe timoun yo lwen aparèy la pandan operasyon an.
• Dekonekte ekipman pou pouvwa a anvan ou fè nenpòt antretyen oswa netwaye.

2. Pwodwi souview

The CLAGE M3/SMB is a compact, hydraulically controlled small instantaneous water heater designed for over-sink installation. It provides hot water instantly for a single tap, making it ideal for hand washing or small dishwashing tasks. The unit features an effective bare-wire heating system (IES®) and comes with a special mixer tap for wall connection.

This image displays the CLAGE M3/SMB small instantaneous water heater unit mounted above a chrome-finished mixer tap. The water heater unit is a compact, rectangular, silver-colored device designed for over-sink installation. The mixer tap features two control knobs and a curved spout.

3. Espesifikasyon teknik

4. Enstalasyon (Enstalasyon)

Enstalasyon dwe fèt pa yon pwofesyonèl kalifye.

4.1 Debake

1. Ak anpil atansyon retire tout eleman nan anbalaj la.
2. Check for any visible damage. Do not install if damaged.
3. Asire w ke tout pyès ki nan lis nan anbalaj la prezan.

4.2 Monte inite a

1. Select a suitable wall location directly above the sink, ensuring sufficient space for maintenance and operation.
2. Use the variable metal wall bracket to mark drilling points.
3. Drill holes and insert appropriate wall plugs.
4. Securely fasten the wall bracket to the wall.
5. Mount the water heater unit onto the bracket.

4.3 Koneksyon dlo

1. Connect the cold water supply to the designated inlet on the mixer tap (usually marked blue).
2. Connect the hot water outlet from the unit to the designated inlet on the mixer tap (usually marked red).
3. Ensure all connections are tight to prevent leaks. Use appropriate sealing materials.
4. Open the main water supply and check for leaks.
5. Before electrical connection, flush the unit by opening the tap until water flows freely and air is expelled.

4.4 Koneksyon elektrik

1. Ensure the main power supply is switched off at the circuit breaker.
2. Connect the appliance to a dedicated 230 V, 3.5 kW electrical circuit. The unit is plug-ready.
3. Verifye bon koneksyon atè a.
4. Once connections are secure, switch on the main power supply.

5. Operasyon

5.1 Premye Itilizasyon

1. After installation and electrical connection, ensure the unit is completely filled with water by opening the cold water tap until water flows steadily.
2. Turn the hot water knob on the mixer tap. The heating element will activate, and hot water will begin to flow after a short delay.
3. Adjust the water temperature by mixing hot and cold water using the mixer tap controls.

5.2 Itilizasyon chak jou

• To obtain hot water, turn the hot water knob on the mixer tap. The unit will heat water as it flows through.
• To obtain cold water, turn the cold water knob.
• Adjust the flow rate and temperature as desired using the tap controls.
• The unit is designed for continuous flow within its specified capacity.

6. Antretyen

Regular maintenance ensures optimal performance and longevity of your CLAGE M3/SMB water heater.

• Netwaye eksteryè a: Netwaye eksteryè inite a ak yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Detartraj: Depending on water hardness, limescale can build up in the heating system. If you notice a decrease in hot water flow or temperature, the unit may need descaling. This procedure should be performed by a qualified technician.
• Tcheke Koneksyon: Periodically inspect water and electrical connections for any signs of leaks or wear.
• Mixer Tap Maintenance: Clean the aerator of the mixer tap regularly to remove any debris or limescale buildup that might restrict water flow.

NAN. Depanaj

Anvan ou kontakte sèvis kliyan, tanpri gade gid depanaj sa a:

If the problem persists after attempting these solutions, please contact a qualified technician or CLAGE customer support.

8. Garanti ak sipò

For warranty information, technical support, or spare parts, please refer to the official CLAGE website or contact your local CLAGE dealer. Keep your purchase receipt as proof of purchase.