1. Entwodiksyon
Thank you for choosing the T.I.P. TVX 12000 Submersible Wastewater Pump. This pump is designed for efficient drainage of clear and dirty water, capable of handling solids up to 20 mm. Its robust construction and powerful motor make it ideal for emergency drainage, emptying ponds, pools, and construction pits. Please read this manual carefully before installation and operation to ensure safe and optimal performance.
Image 1: A person using the T.I.P. TVX 12000 pump to drain water from a pond.
2. Enfòmasyon sou Sekirite
Always observe the following safety precautions to prevent injury and damage to the pump.
- Ensure the power supply matches the pump's specifications (voltage, frekans).
- Do not operate the pump with a damaged power cord or plug.
- Never lift or carry the pump by its power cord. Use the integrated handle.
- Kenbe timoun ak moun ki pa otorize lwen zòn operasyon an.
- Toujou dekonekte ponp lan nan ekipman pou kouran an anvan ou fè nenpòt antretyen oswa netwayaj.
- Pa ponpe likid ki ka pran dife, eksplozif, oswa koroziv.
- Ensure adequate ventilation if operating in confined spaces.
- The maximum liquid temperature for operation is 35 °C.
3. Pwodwi souview ak Karakteristik
The T.I.P. TVX 12000 is a robust and efficient submersible pump designed for various drainage tasks.
- Pwisan motè: Equipped with a 480 W motor and thermal overload protection.
- Operasyon otomatik: Features an automatic start and stop function via a variably adjustable float switch.
- Vortex Impeller: The VORTEX turbine prevents pump blockages and ensures low-maintenance operation, processing solids up to 20 mm.
- Konstriksyon dirab: Impact-resistant plastic pump body for extended lifespan.
- Itilizasyon versatile: Suitable for clear and dirty water, ideal for emptying ponds, pools, construction pits, or emergency drainage.
- Minimum Water Level: Works reliably from a water level of 120 mm.
- Residual Water Level: Leaves approximately 30 mm of residual water after pumping.
Image 2: Visual representation of the T.I.P. TVX 12000 pump's key advantages, including suitability for clear and dirty water, 20mm solid processing, 120mm minimum water level, and robust housing.
Imaj 3: Detaye view of the T.I.P. TVX 12000 pump, highlighting the Vortex wheel and variably adjustable float switch.
4. Espesifikasyon
| Spesifikasyon | Valè |
|---|---|
| Nimewo Modèl | 30261 |
| Pouvwa | 480 W |
| Maks. To koule | 10,800 Liters per hour (10.8 m³/h) |
| Max. Delivery Head / Pressure | 6 m / 0.6 bar |
| Max. Pwofondè Immersion | 7 m |
| Max. Gwosè patikil | 20 mm |
| Min. Water Level for Operation | 120 mm |
| Nivo dlo rezidyèl | Apeprè. 30 mm |
| Longè kab | 10 m |
| Max. Tanperati likid | 35 °C |
| Koneksyon presyon | G 1 1/4" (41.91 mm external thread) |
| Dimansyon (L x W x H) | 20 x 18 x 31 cm |
| Pwa | 3.9 kg |
| Materyèl | Impact-resistant Plastic |
Image 4: Technical drawing showing the dimensions, cable length, and performance metrics of the T.I.P. TVX 12000 pump.
Image 5: Performance curve illustrating the relationship between delivery head and flow rate for the TVX 12000 pump.
5. Enstalasyon ak Enstalasyon
5.1 Konekte tiyo dechaj la
The pump features a G 1 1/4" (41.91 mm) external thread pressure connection.
- Koneksyon dirèk: A drainage hose can be attached directly to the pump if it has a matching 1 1/4" female thread.
- Elbow Connection: The included connecting elbow (32 mm) allows for a hose to be connected using a hose clamp. Ensure the hose clamp is securely fastened to prevent leaks.
Image 6: Illustration of connecting a drainage hose directly to the pump's outlet.
Image 7: Diagram showing the use of the included elbow for hose attachment with a hose clamp.
5.2 Pozisyonman Ponp lan
Place the pump on a stable, level surface in the water to be drained. Ensure the pump is fully submerged and not resting on soft sediment that could block the intake. The minimum water level for the pump to operate is 120 mm.
Image 8: Visual guide indicating the minimum water level (120 mm) required for the pump to draw water effectively.
6. Operasyon Enstriksyon
6.1 Automatic Operation (Float Switch)
The T.I.P. TVX 12000 is equipped with a float switch for automatic operation.
- Adjusting the Float Switch: The float switch cable length can be adjusted to set the desired switch-on and switch-off points.
- Switch-on Point: The pump will start automatically when the water level reaches approximately 33 cm (with the float switch freely floating).
- Switch-off Point: The pump will stop automatically when the water level drops to approximately 15 cm.
- Ensure the float switch can move freely and is not obstructed by walls or other objects.
Image 9: Diagram illustrating the automatic switch-on (33 cm) and switch-off (15 cm) points of the float switch, along with maximum immersion depth and delivery head.
6.2 Operasyon manyèl
For continuous operation or to pump down to the lowest possible residual water level (approx. 30 mm), the float switch can be locked in an upward position.
- To engage manual operation, secure the float switch in its highest position using the integrated locking mechanism or by tying it up.
- Enpòtan: When operating manually, the pump will not switch off automatically. Monitor the water level closely to prevent dry running, which can damage the pump. Disconnect power once the desired water level is reached.
Image 10: Visual representation of the approximate residual water level (30 mm) after pumping in manual mode.
7. Antretyen
Antretyen regilye asire lonjevite ak fonksyònman efikas ponp ou a.
- Anvan antretyen: Always disconnect the pump from the power supply.
- Netwayaj: Periodically clean the pump housing and intake area to remove any debris, dirt, or sediment that may have accumulated. The Vortex impeller design helps prevent blockages, but regular checks are recommended, especially when pumping heavily soiled water.
- Flote switch: Ensure the float switch is clean and moves freely.
- Depo: If storing the pump for an extended period, clean it thoroughly and store it in a dry, frost-free location.
Imaj 11: Gwo plan view illustrating the maximum dirt particle size (20 mm) the pump can handle.
NAN. Depanaj
Anvan ou kontakte sèvis kliyan, tanpri tcheke pwoblèm komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Ponp pa kòmanse. | Pa gen ekipman pou pouvwa. Float switch not activated (water level too low). Pwoteksyon tèmik surcharge aktive. | Tcheke koneksyon kouran an ak fizib la. Ensure water level is above 33 cm or lock float switch for manual operation. Disconnect power, allow pump to cool down for 30 minutes, then restart. |
| Pump runs but delivers no or low water. | Intake blocked. Lè nan ponp lan. Tiyo egzeyat la pliye oswa bouche. Nivo dlo a twò ba. | Disconnect power and clean intake area. Submerge pump completely and allow air to escape. Check and clear the discharge hose. Ensure water level is sufficient (min. 120 mm). |
| Ponp lan kanpe sanzatann. | Water level dropped below switch-off point (automatic mode). Pwoteksyon tèmik surcharge aktive. Entèripsyon pouvwa. | Normal operation in automatic mode. Disconnect power, allow pump to cool down, then restart. Tcheke ekipman pou pouvwa. |
9. Garanti ak sipò
T.I.P. provides a 10-year spare parts availability guarantee for this product. This ensures that replacement parts will be available for a decade from the date of purchase, supporting the long-term usability and maintenance of your pump.
For further assistance, technical support, or warranty claims, please refer to the contact information provided with your purchase documentation or visit the official T.I.P. websit.
Image 12: T.I.P. logo indicating 10 years of spare parts availability.