Manyèl Itilizatè Anpoul Alojèn Philips 7388 20 Watt 6 Volt

Entwodiksyon

This manual provides essential information for the safe and effective use of your Philips 7388 20 Watt 6 Volt Halogen Bulb. Please read these instructions carefully before installation and operation to ensure optimal performance and longevity of the product.

The Philips 7388 halogen bulb is designed to produce a comfortable, warm white light, maintaining its luminous efficiency throughout its operational life. It features a G4 socket and is suitable for various lighting applications.

Enfòmasyon sou Sekirite

Toujou obsève prekosyon sekirite sa yo:

• Pouvwa Off: Always disconnect power to the fixture before installing, removing, or cleaning the bulb.
• Manyen ak Swen: Halogen bulbs can become very hot. Allow the bulb to cool completely before handling.
• Evite kontak: Do not touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves if necessary.
• Kòrèk Voltage: Ensure the fixture's voltage matches the bulb's voltage (6 Volts). Using an incorrect voltage can damage the bulb or the fixture.
• Bon enstalasyon: Use only in fixtures designed for halogen bulbs and with appropriate wattage evalyasyon.
• Dispozisyon: Jete anpoul itilize yo dapre règleman lokal yo.

Enstalasyon ak Enstalasyon

Swiv etap sa yo pou enstalasyon apwopriye:

1. Etap 1: Dekoneksyon kouran
   Ensure the power supply to the lighting fixture is turned off at the circuit breaker or by unplugging the fixture.
2. Step 2: Remove Old Bulb (if applicable)
   If replacing an existing bulb, allow it to cool completely. Gently pull the old G4 bulb straight out from its socket.
3. Step 3: Prepare New Bulb
   Carefully remove the new Philips 7388 bulb from its packaging. Avoid touching the glass envelope with bare hands. If you accidentally touch it, wipe it clean with a lint-free cloth moistened with rubbing alcohol.
4. Step 4: Insert New Bulb
   Align the two pins of the G4 bulb with the holes in the socket. Gently push the bulb straight into the socket until it is fully seated. Do not force it.
5. Etap 5: Retabli pouvwa
   Yon fwa anpoul la byen enstale, retabli kouran an nan aparèy la.
6. Etap 6: Tès
   Limen switch limyè a pou verifye si li fonksyone byen.

Enstriksyon Operasyon

The Philips 7388 halogen bulb operates immediately upon receiving power. No special operating procedures are required beyond turning the fixture's power switch on or off.

• Dimming: If used with a compatible dimmer switch, the brightness of the bulb can be adjusted. Ensure the dimmer is rated for halogen or incandescent loads and matches the bulb's voltage ak wattage.
• Chalè Sòti: Halogen bulbs produce heat. Ensure adequate ventilation around the fixture to prevent overheating.

Antretyen

Minimal maintenance is required for the Philips 7388 halogen bulb.

• Netwayaj: If the bulb becomes dusty, ensure the power is off and the bulb is cool. Gently wipe the glass with a soft, dry, lint-free cloth. Do not use liquid cleaners directly on the bulb.
• Ranplasman: When the bulb reaches the end of its life, replace it following the "Setup and Installation" steps. Always use a bulb with the same specifications (20W, 6V, G4 base) to ensure compatibility and safety.

Depanaj

If your Philips 7388 bulb is not functioning as expected, consider the following:

• Anpoul pa limen:
  • Tcheke si ekipman pou kouran an mache.
  • Ensure the bulb is correctly seated in the G4 socket.
  • Inspect the bulb for any visible damage or a broken filament. If damaged, replace the bulb.
  • Test the fixture with a known working bulb to rule out a fixture issue.
• Siyman anpoul:
  • Ensure the bulb is fully inserted into the socket.
  • Check for loose connections in the fixture or wiring.
  • If using a dimmer, ensure it is compatible with halogen bulbs and not overloaded.
• Short Bulb Life:
  • Verifye vol ki kòrèk latage (6V) is being supplied to the bulb. Overvoltage ka diminye lavi anpoul la anpil.
  • Ensure the bulb is not being touched with bare hands during installation, as skin oils can cause premature failure.
  • Check for excessive vibration or heat in the fixture, which can shorten bulb life.

Espesifikasyon

Key technical specifications for the Philips 7388 Halogen Bulb:

Garanti ak sipò

For warranty information or technical support regarding your Philips 7388 Halogen Bulb, please refer to the official Philips Lighting websit la oubyen kontakte sèvis kliyan yo dirèkteman. Kenbe resi acha w la kòm prèv acha.

Ou ka vizite magazen Philips la pou plis enfòmasyon: Magazen Philips sou Amazon