Behringer DJX400

Entwodiksyon

This instruction manual provides comprehensive guidance for the Behringer DJX400 2-channel DJ Mixer. It covers essential information regarding product setup, operational procedures, maintenance, and troubleshooting. Familiarize yourself with this manual to ensure optimal performance and longevity of your DJX400 mixer.

Devan view of the Behringer DJX400 DJ Mixer, showing its two channels, faders, EQ controls, crossfader, and master section.

Enstalasyon

Follow these steps to properly set up your DJX400 mixer.

1. Debalaj ak Enspeksyon

• Retire mixer a nan anbalaj li avèk prekosyon.
• Inspect the unit for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately.
• Ensure all accessories, including the power cable, are present.

2. Konekte Sous Odyo yo

The DJX400 features two dual-input stereo channels. Each channel can accept either PHONO (turntable) or LINE (CD player, media player) level signals.

• PHONO Inputs (RCA): Connect turntables to the PHONO inputs. Ensure your turntables have a ground wire connected to the mixer's ground terminal (if available) to reduce hum.
• LINE Inputs (RCA): Connect CD players, media players, or other line-level audio devices to the LINE inputs.
• MIC Input (1/4" TRS): Connect a microphone to the 1/4" TRS input on the front panel.

3. Konekte Sorti Audio

• MASTER Output (RCA): Connect this output to your main PA system or amplifier. This is your primary audio output.
• BOOTH Output (RCA): Connect this output to a monitor speaker system in your DJ booth. This allows you to hear your mix independently of the main output.
• REC Output (RCA): Connect this output to a recording device (e.g., a digital recorder, computer audio interface) to capture your mix.
• HEADPHONE Output (1/4" TRS): Connect your headphones to this jack for monitoring.

4. Koneksyon pouvwa

• Asire w ke switch pouvwa mixer a nan pozisyon OFF (Off).
• Connect the provided power cable to the mixer's power inlet and then to a suitable AC power outlet.
• Power on your audio sources and amplifiers before turning on the mixer.
• Finally, switch the DJX400 power ON.

Opere

This section details the functions of the DJX400's controls and how to operate the mixer.

1. Channel Controls

Each of the two stereo channels features the following controls:

• INPUT SELECT Switch: Toggles between PHONO and LINE inputs for the respective channel.
• Kontwòl GAIN: Adjusts the input sensitivity for the channel. Set this so the channel's peak LED occasionally flashes, but does not stay lit.
• 3-Band KILL EQ: Provides -32 dB attenuation for HIGH, MID, and LOW frequencies. Use these to sculpt the sound of each track.
• CHANNEL FADER: Controls the volume level of the individual channel.
• PFL (Pre-Fader Listen) Button: Routes the channel's audio to the headphone output for monitoring before it reaches the main mix.

2. Crossfader

The DJX400 features a super-smooth dual-rail "Ultraglide" crossfader designed for up to 500,000 life cycles.

• CROSSFADER: Blends between Channel 1 and Channel 2. Moving it to the left emphasizes Channel 1, and to the right emphasizes Channel 2.
• CROSSFADER CURVE Control: Adjusts the response curve of the crossfader. A sharp curve is ideal for scratching, while a smooth curve is better for blending.

3. Master Section

• NIVO MÈT: Controls the overall output volume of the mixer to the main PA system.
• BOOTH LEVEL: Adjusts the volume of the BOOTH output for your monitor speakers.
• NIVO MIC: Controls the volume of the microphone input.
• XPQ 3D SURROUND: Activates and adjusts the XPQ 3D surround effect, which widens the stereo image and adds transparency to the sound. Turn the knob to increase the effect.

4. Headphone Section

• NIVO KASYÈ: Ajiste volim pwodiksyon kas ekoutè a.
• PFL/MAIN MIX Control: Blends between the PFL (pre-fader listen) signal and the main mix in your headphones.
• SPLIT/STEREO Switch: In SPLIT mode, the PFL signal is sent to one ear and the main mix to the other. In STEREO mode, both signals are mixed in stereo.

5. BPM Counter

The intelligent dual auto-BPM counter displays the beats per minute for both channels, aiding in beatmatching.

• The display shows the BPM for the active channel or the channel selected for PFL.
• Use the BPM display to visually match the tempo of two tracks before crossfading.

Antretyen

Proper maintenance ensures the longevity and reliable operation of your DJX400 mixer.

Netwayaj

• Always disconnect the mixer from power before cleaning.
• Sèvi ak yon twal mou, sèk, ki pa gen pousyè pou siye sifas ekstèn yo.
• Pou pousyè tè ki difisil pou retire, yon ti kras damp Ou ka itilize yon twal ak savon dou, epi apre sa, ou ka itilize yon twal sèk.
• Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and internal components.
• Keep faders and knobs free from dust and debris. Compressed air can be used carefully to clear dust from crevices.

Depo

• Lè w pa ap itilize mixer a, sere l nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
• Protect the mixer from dust by covering it with a dust cover.

Depanaj

This section addresses common issues you might encounter with your DJX400 mixer.

Espesifikasyon

Key technical specifications for the Behringer DJX400 DJ Mixer:

Garanti ak sipò

Behringer products are designed for reliability and performance. For detailed warranty information and technical support, please refer to the official Behringer websit la oubyen kontakte konsesyonè lokal ou a ki otorize a. Kenbe resi acha ou a kòm prèv acha pou nenpòt reklamasyon garanti.

• Sipò sou entènèt: Vizite Behringer ofisyèl la website for FAQs, software downloads, and support resources.
• Sant sèvis: Locate authorized service centers for repairs and maintenance.