Altec Lansing 120

Altec Lansing 120 Satellite Speaker System Instruction Manual

Entwodiksyon

The Altec Lansing 120 is a two-satellite speaker system designed to enhance the audio experience for various devices. This system provides clear sound for personal computers, video gaming systems, portable CD players, MP3 players, and other audio sources. Its compact design and simple connectivity make it a versatile audio solution.

Karakteristik kle yo enkli:

  • 2 Watts total Continuous Power output.
  • Compatibility with multiple audio sources including PCs, gaming systems, portable CD players, and MP3 players.
  • Integrated Power On/Off and Master Volume controls for easy operation.
  • Convenient Headphone Jack for private listening.
  • Shielded Satellites to prevent interference with other electronic devices.

Kontni pake

Tanpri verifye ke tout atik yo prezan nan pakè ou a:

  • Two (2) Altec Lansing 120 Satellite Speakers
  • One (1) Audio Input Cable (3.5mm stereo jack)
  • Yon (1) AC Power Adapter

Enstriksyon Enstalasyon

Follow these steps to set up your Altec Lansing 120 speaker system:

  1. Plasman Oratè: Place the two satellite speakers on a stable, flat surface, ideally on either side of your listening area (e.g., computer monitor, TV) for optimal stereo sound. Ensure they are positioned to direct sound towards you.
  2. Konekte ak pouvwa: Plug the AC power adapter into the designated power input port on one of the satellite speakers. Then, plug the other end of the power adapter into a standard wall electrical outlet.
  3. Konekte ak sous odyo: Locate the 3.5mm audio input jack on the back of the primary satellite speaker. Connect one end of the supplied audio input cable to this jack. Connect the other end of the audio cable to the audio output jack (typically green) on your PC, gaming console, portable CD player, or MP3 player.
Altec Lansing 120 Satellite Speakers connected to a device

Image: The Altec Lansing 120 satellite speakers, showing their compact design and typical setup next to a computer monitor. The image illustrates the two speakers with their cables connected, ready for use.

Enstriksyon Operasyon

Once the speakers are set up, follow these steps for operation:

  • Limen/Etenyen: Locate the integrated power control (often combined with the volume knob) on the primary satellite speaker. Turn the knob clockwise to power on the speakers. Turn it counter-clockwise until it clicks to power off.
  • Ajiste Volim: Rotate the master volume control knob on the primary satellite speaker to increase or decrease the sound level. It is recommended to start with a low volume and gradually increase it to a comfortable listening level. Also, ensure the volume on your audio source device (PC, MP3 player, etc.) is adequately adjusted.
  • Sèvi ak Jack ekoutè a: For private listening, plug your headphones into the headphone jack located on the primary satellite speaker. Plugging in headphones will automatically mute the speaker output. Unplugging the headphones will restore sound through the speakers.

Antretyen

To ensure the longevity and optimal performance of your Altec Lansing 120 speaker system, follow these maintenance guidelines:

  • Netwayaj: Use a soft, dry cloth to clean the exterior of the speakers. Avoid using liquid cleaners, aerosols, or abrasive materials, as these can damage the finish or internal components.
  • Vantilasyon: Ensure that the speakers are placed in an area with adequate ventilation. Do not block any vents or openings on the speaker enclosures.
  • Depo: If storing the speakers for an extended period, disconnect them from power and audio sources. Store them in a cool, dry place away from direct sunlight and extreme temperatures.
  • Swen kab: Avoid sharply bending or crimping the power and audio cables. Regularly check cables for any signs of wear or damage.

Depanaj

Si ou rankontre pwoblèm ak sistèm oratè ou a, gade pwoblèm ak solisyon komen sa yo:

PwoblèmKòz posibSolisyon
Pa gen son ki soti nan moun kap pale
  • Oratè yo pa limen.
  • Volume too low on speakers or audio source.
  • Kab odyo a pa byen konekte.
  • Kas ekoutè branche.
  • Ensure speakers are powered on.
  • Increase volume on both speakers and audio source.
  • Tcheke tout koneksyon kab odyo yo.
  • Unplug headphones from the jack.
Son defòme oswa ki pa klè
  • Volim twò wo.
  • Sous odyo ki pa bon kalite.
  • Koneksyon kab ki lach.
  • Lower the volume on speakers and/or audio source.
  • Eseye yon lòt sous odyo oubyen file.
  • Asire ke tout câbles yo byen konekte.
Se yon sèl oratè k ap travay
  • Loose connection to the non-working speaker.
  • Kab odyo defo.
  • Check the connection of the non-working speaker to the primary speaker.
  • Eseye yon lòt kab odyo si ou genyen.

Espesifikasyon

Technical details for the Altec Lansing 120 Satellite Speaker System:

KarakteristikDetay
MakAltec Lansing
Nimewo Modèl120
Kalite OratèSatelit
Koneksyon TeknolojiBranche
Kalite aliyeEndependan, ploge mòn
Sous pouvwaFil elektrik
Metòd kontwòlAdistans (Note: Refers to integrated controls, not a separate remote unit)
KoulèNwa
UPC021986940029

Garanti ak sipò

For detailed warranty information, product registration, and technical support, please visit the official Altec Lansing websit la oubyen kontakte depatman sèvis kliyan yo. Kenbe resi acha w la kòm prèv acha pou nenpòt reklamasyon garanti.

Remak: Kondisyon garanti espesifik yo ka varye selon rejyon an ak détayan an.

© 2024 Altec Lansing. Tout dwa rezève.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.